We do a lot to protect our families when they are at home. We lock the doors at night, make sure there are no safety hazards like broken stair rails or exposed pools. Have you ever thought about your smoke detectors? Sure you probably have a couple in your house, but have you checked the batteries? It can be hard to remember to replace the batteries every six months. Fortunately, there is an option your electrician in Pasadena can help you out with.

The professionals at The Electric Connection can explain why hard-wired smoke detectors are so important. This type of device is connected directly to your home’s power so you don’t have to worry about regular battery changes. Plus, you don’t have to worry about somebody “borrowing” the batteries and not replacing them right away.

When the smoke detectors are wired into the home, they are interconnected. Meaning, when the smoke detector in the kitchen goes off, the one in the upstairs bedroom and garage also goes off. In the event of a fire, this can give occupants in the home several extra minutes to get out. Every minute counts when there is a house fire. Your Pasadena electrician can install the detectors in any room you request.

Along with hard-wired smoke detectors, a carbon-monoxide detector is also a good idea. One in the garage and on every floor of the house is typically the standard. These are especially important if you burn any fuel within the home or leave cars running in a garage. Carbon monoxide is odorless, tasteless and colorless. It is crucial to your family’s safety to have one of these valuable devices installed.

Add another layer of protection for your family and give The Electric Connection a call today and schedule an appointment to have your smoke and carbon monoxide detectors installed.

In general, you don’t want anything in your home’s electrical system to create sparks. It’s usually a major warning sign that the system requires repairs. You should immediately stop using the sparking appliance and call for professional electricians.

However, sparks from outlets are something that homeowners often ignore. Its commonplace for a slight blue spark to appear when you plug an electrical appliance, like a vacuum cleaner or a toaster into a wall outlet: this is a visible effect from the start of the flow of electrons. However, larger sparks might begin to occur. When this happens, you need to call for professional electrical repairs as soon as possible. Under no circumstances should you attempt to open up the outlet cover and investigate the sparking on your own—this is potentially very hazardous.

There are a number of possible causes for an outlet to develop the dangerous sparking that might lead to electrical fires. One of the common reasons is that the outlet has overheated and melted the insulation around the wires. (This is why you should never use an octopus plug to connect too many appliances into a single outlet at the same time; it’s easy for the outlet to overheat.) When the wires are exposed because of melted insulation, it can cause electrons to leap from the wire to the metal case or even the opposite wire. This is known as a short circuit. Short circuits are potentially very dangerous as sources of electrical fires. Most of the time, a short will cause the circuit breaker panel to trip and cut off the circuit to prevent further damage. Frequently tripped breakers are a major warning sign that your have trouble with an outlet.

However, if there are other problems with the wiring your home, a short circuit in an outlet could start a fire behind the walls. If you ignore major sparking from an outlet, this is one of the risks that you’ll take.

Fortunately, professional electricians are experienced with fixing and replacing faulty outlets to prevent the dangers of short circuits. You should watch out not only for sparking from outlets, but also outlets that feel hot to the touch or show signs of discoloration and charring on their surface. An outlet that continually trips circuit breakers also needs an electrician to investigate it.

The proud owner of a generator, whether for general use or use in an emergency, can rest assured that they have access to the power they need. But what if your generator isn’t quite up to the task? This can leave you with no means to perform normal functions at best, and at worst could leave you powerless in the face of a storm or other catastrophe. The certified experts at Kolb Electric have a strong history of handling generators, and today we bring you one of the most common complaints among generator-owners: power surges.

When it comes to communicating signs of disrepair, generators are actually rather talkative. It’s all in understanding the signs, the most common of which coming in the form of surging.

Surging refers to a generator (or other electrical component, machine or device) displaying clear fluctuations in behavior at intervals. These intervals can follow a clear pattern, or can be completely random. What exactly does this mean? Let’s use some examples.

A surging generator often will leave lights burning much brighter, then much dimmer rapidly, causing a sort of flicker back and forth. In machinery, this can also come as drastic changes in pace as well; such as a fan running faster and then slower for no obvious reason.

There are actually numerous causes for generator surging, including:

Bottom line; if your generator is experiencing surging there is definitely something wrong. The causes are myriad, but the solution stays the same. Seek professional assistance for your generator repair to ensure it’s ready and available when you need it most!

At Kolb Electric, we’ve been handling generator installation, repair and replacement for years, and we always bring our very best to any project. if you’re experiencing generator surges, don’t hesitate to contact us right away!