In many parts of the country, like Los Angeles where I do electrical work, electric vehicles (EVs) are being delivered to anxiously waiting customers. Deliveries are also starting in other West Coast cities as well as cities along the Eastern Seaboard. In the center of the country, not so much. In many cases, these areas will start receiving deliveries towards the end of 2011.

Let’s say electric car deliveries have already started in your area and you own of these new-fangled vehicles — a Nissan Leaf or Chevy Volt. How do you recharge the battery? In my last post, I talked about the simple and inexpensive option, Level 1 charging. This is using a charging cord that comes as standard equipment with your electric vehicle, similar to the one your cell phone comes with. You’ll need an electrician to make sure that you’ve got the right kind of outlet in your garage or carport (GFI outlet on a dedicated circuit). Your electrician will also need to check whether your electrical panel needs upgrading for sufficient capacity. Once it’s a go, plug your charging cord into the outlet and wait … a long time. For the Chevy Volt, 10 hours, and the Nissan Leaf, 20 hours — empty to full.

Even though Level 1 charging is slow, drivers who have short commutes may be satisfied with it because, if they work it right, they won’t start at empty. They’ll have charge left in their batteries and will simply top off at night.

Here’s how it can work. The range of the Nissan Leaf is about 100 miles. Americans drive an average of 33 miles a day. Drivers who drive the average 33 miles will use only one-third of the battery in a day. If they religiously plug in when arriving home, they will be able to top off at night in about seven hours and leave with a full charge in the morning.

In addition, the pressure to be fully charged when leaving home will ease as chargers are increasingly installed in public places. Chargers are already available in Los Angeles train stations, the main airport (L.A.X.), the L.A. Convention Center, and other public places. One can easily find the network of existing public chargers on-line. In addition, malls will begin installing chargers as an inducement for shoppers and workplaces as an employment benefit. In time, you’ll be able to recharge your battery while you shop or work. But we’re not there yet.

For hybrids, like the Chevy Volt, the issue of leaving home fully charged is less pressing. The Chevy Volt can drive for about 35 miles on a fully-charged battery. Once the battery hits empty, it, like other hybrids, the Volt turns to burning gas in a conventional internal combustion engine. This isn’t good for gas usage, but on the other hand, the driver may suffer less from “range anxiety.”

While you may be able to make Level 1 charging work, you also have the option of faster charging by installing a special Level 2 charger in your garage or carport. More on Level 2 Charging in later posts or find out more by clicking here.

For more about my company, The Electric Connection — all the stuff you wanted to know but were afraid to ask — . If you’re interested coupons for electrical work, for example, $50 off installation of a Whole House Surge Protector in the L.A. area, click on our coupon page.

As you can see, no matter which type of scenario that lighting comes up in; it matters. Whether you run an office or a huge industrial sized factory; the quality of your lighting is highly important.

We are going to list the most important points that qualifies “good” industrial lighting systems, what to watch out for, as well as what to be on the look out for when it comes to your commercial lighting purchases.

Quality of light being produced. The quality of light that your lighting system will make or break your lighting system investment. If you cheap out initially and go with cheaper light sources such as HPS, you will regret it in the long run. Not only does LED typically offer a better CRI score, but it has many other benefits such as…

Do you want rebates for your lighting investment? If so; buy DLC qualified.

Conclusion

A well planned electrical system should be a top priority in every home. There is no denying that electricity is a vital energy that enables everyday tasks to be completed with ease. Not having lights in the kitchen during a party due to a faulty wiring is truly a nightmare. The last thing that you would consider is to tinker with this electrical problem in your best suit, right? This is the time when you wish that a reliable electric repair service Downingtown, PA is in your personal phone book.

Electric repairs for the most part should be left to certified electricians. These are professionals that are trained to troubleshoot any electrical breakdown as safely as possible and to find the best solution that would get you back on track with your daily activities in no time.

Take note though that not all electric repair service companies are created equal. These are suggestions on how to choose the most appropriate electric repair service Downingtown, PA based on your desired quality of service:

a) Inquire how long the company is already in the business. Do they have any referrals that you can contact?

b) Make sure that the company is staffed with licensed electrician who is familiar with your home’s electrical system and well versed with the electrical repairs.

c) Factor in to your evaluation the location of the company. Is the office near your neighborhood? Since your service call would likely to be an emergency, it is nice if the issue can be addressed right away by the Electrician.

d) Check if the electric service repair company can provide a guarantee on completed jobs/ projects and for how long would this guarantee cover you. This provides security and peace of mind just in case the electrical repair done was not successful.

If in case you are really on a tight budget, then consider purchasing your own electrical parts. You can consult the electric repair service Downingtown, PA on what to buy and then just pay the company for labor in the end. Remember though that if you do not have the right information with you like the model and size of the electrical part, it might cost you more in the end. Speak to an experienced and reliable Downingtown Electrician by calling (610) 269-4136 or click here.

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.