hazardous location lighting.

The National Fire Protection Association (NFPA), National Electric Code (NEC) 70, defines hazardous locations through a system of classes, divisions or zones, and groups that products must be labeled as to be used in those areas. Hazardous area classifications are based on the general type of substance or material that is present in the area, the likelihood that it exists, and more detailed specifics, such as ignition temperatures and combustible properties.

 

Class I:

A Class I hazardous location contains flammable gas, liquid-produced vapors, or combustible liquid-produced vapors that can be present in quantities large enough to create an explosion.

Typical locations include airplane hangars, vehicle paint shops, commercial laundromats, and gas plants.

 

Class III:

This type of location contains easily ignitable fibers or flyings in the air but that aren’t likely to be in suspension in amounts large enough to cause an explosion.

Typical locations include textile mills, cotton mills, and sawmill facilities.

explosion-proof LED lights that are safe for use in a variety of hazardous locations. Click each photo to see details, including a complete list of classifications and certifications.

If you have any questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

If you’ve been contemplating upgrading your home electrical system with your very own solar panel installation, there is no better time than summer. Here are a few reasons to make those dreams a reality.

The first is that you’ll get the best performance out of your system when the sun is shining the most. Of course, your solar array is going to give you energy savings all year long, especially in sunny southern California but in the summer, you’ll see impressive results right away that will really show you the potential of home solar power.

Without the threat of inclement weather preparing your home and installing your new system is much faster, translating to a more painless process for you. It also means that we have more jobs in the summer, so you might need a little advance scheduling. But all that is beside the biggest reason that you should pursue a solar panel installation:

The sooner you get solar at your home, the sooner you can start saving.

As you know, power prices increase all the time, with an average increase of around five percent a year. While municipal power increases, solar power provides a point of stability for your energy bill. Your solar power will always cost the same amount, so every time municipal power increases, your savings do too.

And with generous tax rebates and solar leasing agreements, you can establish an impressively low cost investment on your solar panel installation. You might even qualify for no down payment. You pay the cost of installation and parts over the life of your solar panel, even as you see instant deductions in your power bill.

As you can see, taking action now translates to intense savings for years to come. Don’t wait another minute. Let us help you take charge of you energy and financial future this summer.

The United States has three main power grids: The Eastern and Western Interconnection, which each service multiple states, and Texas, which gets an independent power grid. The Electric Reliability Council of Texas, or ERCOT, handles 85 percent of the state’s power needs, producing and distributing electricity to 23 million people.

But, why does Texas need its own grid?

Slate reports that during World War II, Texas was home to many factories required for critical supplies. The electrical planners didn’t want to depend on energy coming in from other states, so they used the abundant natural resources to set up a grid specifically for Texas. Even today, this state requires a massive amount of electricity to keep the industrial sector powered, so it makes sense to have a dedicated grid.

Texas has a strong culture of self-sufficiency, which had an influence on the development of its own energy grid. It does have links to the other interconnections, which get used during particularly high demand periods. Unusually hot summers or long heat waves can sometimes lead to Texas importing energy, so the air conditioners keep going strong.

The utility companies governed by the ERCOT typically do not sell energy outside state lines. This configuration allows Texas to set most of its own rules and regulations, as opposed to the Federal Energy Regulatory Commission setting oversight in place. State regulators can make decisions that make the most sense for their residents, rather than making adjustments based on the needs of multiple states.

Texas has the space and natural resources needed to produce inexpensive electricity for residents and businesses. These costs fall below the national average. Renewable energy sources, such as wind-powered electricity, are moving Texas to more environmentally friendly options.

However, inexpensive energy does have a downside. Population growth in Austin is significant, thanks to startups, tech companies and other businesses moving into the area. Google Fiber also plays a role in bringing in more people. The energy grid needs to adapt to the rising amount of individuals who call Texas home, but electricity companies have less of an incentive to build in Texas compared to states with higher energy costs.

Contact Bryant Electric Service to make sure you’re getting the most out of the Texas Power grid and take back your energy today!

Simple lighting changes can have a huge impact on the look and feel of the rooms and hallways in your home. If your home is laid out properly, adding some great-looking wall sconces can add to the homey, inviting feel of your home. In addition to the great look that they provide, wall sconces also take up a very small amount of room, because they are placed directly on the wall. For this reason, they are perfect for bathrooms, hallways and other small spaces.

One thing to keep in mind when having your electrician in Beverly Hills install your wall sconces is proper placement. Making sure that your wall sconces are placed in the appropriate places is key to a successful installation. By placing your wall sconces strategically, and attaching them to dimmer switches, you can accent all the areas in your home that you feel like accenting. This can create a very dynamic, easily manipulated and inviting atmosphere. You should also strongly consider the height at which your wall sconces are placed. For the best results, choose a height and stick with it. Placing them uniformly gives them a professional and continuous look.

Wall sconces have become very popular in homes throughout the country, largely because of their small size and ease of installation. Although their primary use is to provide light in underlit areas, wall sconces can also be decorative elements when not lit. When coordinated with your décor, they can give your home a certain amount of flow and decorative continuity that is not possible otherwise. You can find them in many different shapes, sizes and styles that are ready for your electrician Beverly Hills to install today. To talk about installing wall sconces or any other light fixtures, call The Electric Connection Today.

Click here to visit our website.