The strike doesn’t even have to be a direct hit on your home but can occur within half a mile.  As a matter of fact, the majority of surges that most people take are from problems at someone else’s home or somewhere further down on the power company lines.  A surge doesn’t have to be lightning; it can come from an automobile accident that hits a power pole or even from a routine maintenance on the main power lines when they turn the power back on.  This off and on of the power with the main electrical lines can send surges into your home or business that I have seen destroy lots of electronic equipment and appliances.

Almost every home has multiple computers, and expensive home entertainment systems.  Even our appliances are high-tech with monitors built into the doors of refrigerators and laundry appliances with electronic controls.  These items are especially vulnerable to spikes in your home’s electrical current that may cause melted circuit boards and overheated wires.  Repairs to these expensive gadgets are much more costly than replacing a blown out light bulb or electrical outlet.

One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

 

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

]]>

Piano Lamps Sing and Make Sweet Music at Capitol Lighting!

Ambient lighting in a piano room or formal living space is the key note needed and piano lamps can make this room sing and make sweet music!  Capitol Lighting offers a beautiful selection of piano lamps and picture lighting for any room in your home. Make a grand statement with modern piano lamps on your baby grand piano! House of Troy lighting makes any piano sing and they offer picture lighting in a wide selection of finishes to choose from such as polished brass-gold, black and even satin nickel brushed steel.

Create the perfect ambient lighting in your formal living room or piano room with House of Troy lighting.  Piano lamps and picture lighting is the key note needed to create a soft and inviting glow in a formal space.  Shop Capitol Lighting online for all of your formal lighting needs and start creating sweet music with House of Troy lighting.

 

To commemorate our fifteenth year, we are taking a look back at what life was like 15 years ago. Do you remember May 1999? It was a month of ups and downs. We gained Star Wars: The Phantom Menace but lost Shel Silverstein. Natural disasters of epic proportions and new leadership in world powers made the month one that would change the course of history. Legal precedents were established and technologies that we all utilize now were just being announced. Here are fifteen moments in history from fifteen years ago. Next stop: May 1999.

1. Bluetooth Is Announced

Early in the month, for about six days, 152 tornadoes ravaged the mid-west and eastern U.S. It was the worst in Oklahoma, with one F5 tornado – the second strongest recorded in U.S. history – that caused $1 billion in damage.

3. Goodbye, Shel Silverstein

In Milan, Italy, after 22 years of restoration work, Leonardo da Vinci’s newly-restored masterpiece The Last Supper was put back on display. This is an unforgettable moment in art history.

5. The Ancient Operating System

via wordpress.com

The Mummy, a horror adventure starring Brendan Frasier, was released in the U.S. in May 1999. Although the film was originally meant to be a low-budget horror series, it turned into a blockbuster hit.

7. Not So Entertaining Anymore

Star Wars: The Phantom Menace was released in theaters, and millions of children began having nightmares about red-eyed guys with horns chasing them with two-sided light sabers. And we thought Darth Vader was intimidating…

9. Italian Stallion of Politics

Teenie boppers lost their minds as they excitedly tore open the packaging on their copies of The Backstreet Boys’ newest release, Millennium.

11. Here’s SpongeBob!

Kansas City, Missouri, wrestler Owen Hart (Blue Blazer) fell 78 feet to his death while being lowered into a World Wrestling Federation ring during WWF Over the Edge.

13. So Long, Home Improvement

The Dow Jones Industrial Average closed above 11,000 for the first time in its history at 11,014.70. Many speculate in hindsight that this bump was actually artificially created by overlending and that in retrospect this was a warning sign for the future recession. It was a cause for celebration then: Now, it’s something from which we have hopefully learned a lesson. 

Advanced lighting control systems (ALCS) utilize electronic circuits with a programmable logic controller to automatically adjust lighting levels.  Program a number of variables and light requirements to get the lighting just perfect. This helps in providing the right amount of light where and when it is needed, hence improving energy efficiency and savings.

Advanced lighting control systems provide benefits like automatic scheduling and dimming. Turn lights off based on room occupancy and level of daylight. In so doing, the ALCS adjusts the light levels to match the requirements at any particular time. For example, when a room is empty, lights dim or go off completely. This saves on utility costs.

The sensors communicate with the lighting control system through wired or wireless connections. In some applications, sensors are integrated into the lighting control. While the wired network requires hand wiring of all the devices, the wireless communications use radio frequencies. Therefore several benefits exist over the wired network.

Wireless technology eliminates the need for wiring and is, therefore, cheaper, easy to implement and modify. It provides more flexibility while reducing the planning time for the electrical system. Wireless lighting controls are ideal for hard-to-reach lights. These include places where there are non-accessible or hard ceilings, basements, and other expensive or hard-to-wire areas.

The controller automatically adjusts the level of illumination based on one or a combination of the following variables.

The controls utilize room occupancy or proximity sensors to check for activity in the room or target area. If there is no activity, the controls automatically switch off or dim the lights. The system will then turn the lights to full brightness when room occupancy sensors detect someone within a defined space.

Different lighting levels are required based on the activity. In some applications such as warehouses, there is no need to keep all the lights on when areas are not in use. The lighting control systems will either turn off or dim most of the lights. Some advanced systems provide just enough light in the open spaces. Yet, more light becomes available near shelves where a worker might be picking up or replacing items.

Additional light is required during office hours when people are working. However, this isn’t necessary during the lunch break, or when offices are being cleaned. A combination of controls may be used here. Take advantage of daylight, dim or completely turning off the lights when more natural light filters into the room.

The programmable controls can be used to switch individual or groups of lights depending on time of day. These programs run 7 days a week. Consequently, there’s a separate schedule for weekdays, weekends, and holidays. In an office setup, a timer ensures that all lights, apart from security lights, are turned off at night, during the weekends and on holidays.

Instead of using the lamp at its maximum rating when new, the controls dim the light in certain cases. This reduces the normal wear and tear. As the lamp ages, its level of illumination will decrease. However, instead of the light level going down, the control will decrease the dimming level and maintain the required level of light.

So instead of powering the light at 100% and wasting energy with excess light that is not required, the controller ensures light is powered at a lower percentage. This ensures that required light is provided, but at a lower power consumption.

Factors considered when implementing a lighting system include the need for flexibility, facility size, floor plans, facility use, daylight hours, and building codes. Other considerations include the cost-effectiveness of the system, the ease of use, visual performance and comfort.

In addition to controlling the lights, the advanced lighting control systems help in determining the occupancy patterns. Moreover, the operating status of part or whole sections and the entire system’s performance is monitored. This provides business owners with an opportunity to evaluate the effectiveness of the installation and make adjustments.