There’s been a lot of questions about Federal Pacific Electric Panels.  The Dallas Morning News ran an article on the potential of fire that these panels possess.  As an Electrical Contractor with 27 years experience, I can tell you first hand that these electrical panels are unpredictable and unsafe.  We had a customer who was renting a house and was having an electrical problem. We told her it was due to her electrical panel.  This Federal Pacific Panel was overheating and beginning to melt.  We informed her that she needed to change it.  She got back in touch with us Sunday night to schedule for Monday morning to have the panel replaced.  We told her we would be there at 9am and she said she had to drop her kids off at school and would prefer a 9:30am appointment.  When we showed up at 9:30, she showed up at the same time and we were both greeted by the Fire Department trying to put out the fire in her home due to the electrical panel.

Failure of these panels is not an “if,” but “when.”  A quick evaluation by a licensed and knowledgeable electrician can make a big difference.  Don’t gamble on your security, call and get the free evaluation today!

ElectricMan Inc. is one of Dallas’ most trusted electricians. Nick Schaeffer, Mr. ElectricMan himself, has quite the resume for a master electrician. He started the company by himself in 2004 and hasn’t looked back since! For more information about Electricman’s list of electrical repair services, please visit www.ElectricManInc.com

relatively high ceilings. Drive by any industrial park, warehouse, or factory, and walk inside and what you will see is a high bay light.

But walk into any factory or warehouse and you will see different styles and options, wattage’s and configurations. Traditional high bay fixtures that were once common place were Mercury Vapor, which were then replaced with High Pressure Sodium and Metal Halide bulbs. As new technologies were introduced, and old technologies became more common, the old HID bulbs were replaced with Induction and Fluorescent light sources. And more recently with the more wide spread approval and popularity of LED, we started to see conversions from these older technologies to the latest energy saving LED High Bays.

A High Bay Fixture, depending on the light source, can take on many forms and shapes. If you consider a Metal Halide or High Pressure Sodium fixture, they typically consist of a large heat sink block at the top of the fixture that typically houses the fixtures ballast. Below is an aluminum or acrylic dome and at the top of the dome is the HID bulb. These bulbs typically come in two wattage’s, 400 and 1000. 400 Watt Fixtures tend to be installed in ceiling heights no higher than 30 feet, 1000 watt fixtures are typically 40 feet or higher. Interestingly enough, spacing of lights is similar to the height they are located off the floor. A fixture installed at 20 feet from the floor is installed in a 20X20 pattern, 30 feet in a 30X30 pattern, 40 feet in a 40X40 pattern. Of the 3 type of HID bulbs, Metal Halide tends to be the best option. High Pressure Sodium Bulbs are very low on the temperature color and have the warehouse aisles have the ability to focus the light where it is needed. A light designed for a warehouse aisle is a lot different than a light designed for a gymnasium or a factory floor. In these spaces, a light that can flood the area evenly is important, in a warehouse aisle, a light that can light up the face of the shelves and the floor below is important. And when selecting energy efficient options, its just as important to understand the technology and what it is capable of doing. Adding controls to a T5 fluorescent fixture is a good idea only if the ballast is designed to handle that requirement and not lower the life expectancy of the bulbs. Motions sensors and daylight controls that dim the light output based on occupants and the amount of daylight available in the space. Technologies such as metal halide and high pressure sodium are not a good choice as these technologies are not good at dimming or turn on or off quickly. Fluorescent can dim, but you need special ballasts for them. So knowing what you want to do and may want to do is important at time of purchase, because not having the proper equipment or options could mean a costly lighting warehouses, factories, gyms and readily available through the utility companies, and mass adoption means the technology of LED had matured to the point where the questions and disbelief of past years have gone away.

Your business’ lighting is critical to its success, and with commercial lighting rapidly changing, you could be light years behind the times. Don’t let your business be left in the dark. Take advantage of the perks of modern lighting!

Buildings constructed just 20 years ago harbor energy-hogging lighting systems in dire need of replacement.  Consider computers built in the 80s and 90s versus today’s models, and that will give you an inkling of how far behind the times your lighting systems are - and you’re not alone. According to the DOE, more than 75 percent of buildings are over 20 years old, collectively wasting more than $50 billion annually by holding on to antiquated lighting systems.

Depending on your business type, 20-50 percent of your electricity budget is sucked up by lighting demands. This means energy-saving improvements could really help manage costs. In fact, with continually improving bulbs, fixtures, and controls, lighting typically provides the highest return on investment among major upgrades. The right combination could pay for itself in three to five years, and save you 25-50 percent annually on lighting energy. How much could you save?

Talk to your Mr. Electric® professional to learn more about benefits and incentives available in your region, including:

The experts at Mr. Electric can help you get things all figured out, from the best lighting options for your business to cost. Our experts have what it takes to assess your current lighting system and needs, damaged/outdated/mismatched systems, inefficiencies in energy use, necessary light levels and color, under-lit areas, and more, to find lighting solutions perfectly matched to your needs – and your budget!

Have a bright idea about your business’ lighting? Contact Mr. Electric today.