Most problems with the electrical wiring in a house take a professional to handle. A certified Electrician (electrical contractor) needs to be consulted, so the problem is repaired correctly and to local codes. The city, county, and/or state where you live set the codes to make sure your house is safe to live in without electrical fires or other serious issues happening. Below are five simple tips to how to pick the right professional for the job.

If you’d like to speak more with a team member at Bryant Electric Service about having electrical work done, call our offices at: 512-402-8587.

The start of the new school year for kids means cooler weather is just around the corner! The Farmer’s Almanac is predicting another wicked cold winter, with our area getting cold, wet, and white…yikes!

Since winter is often the time when energy bills are the highest, we thought we’d share a few of our favorite energy saving tips to help keep you comfortable without breaking the bank this season. Keeping your electrical system safe is important, especially when snowstorms threaten to knock out power (and with it, heat!), so read up and remember: for all your electrical service needs in Maryland, Virginia, and Washington, DC, call Kolb Electric!

If you use a heat pump to heat and cool your home, you probably already know that they’re among the most efficient HVAC systems you can install—if you use them correctly.

During the winter, set your thermostat to the lowest setting you’re comfortable with and keep it there for the whole season—the U.S. Department of Energy (DOE) recommends 68 F, but ultimately this is up to you. Every degree you set the thermostat lower will lower your energy use, so if you like to bundle up, this is a great way to save!

Most heat pumps come with a backup heating system to give you a little extra heat if the pump itself can’t make it. Unfortunately, electrical resistance heat is very inefficient and can get expensive if you use it too often. This electrical backup kicks on when you turn your thermostat up, which is why it’s best to set your thermostat once during the winter and then leave it there.

The one time when you should adjust your thermostat is when you’re leaving the house for a few days—the backup heat will kick on when you come back and set it back up, but the amount you save from being gone should offset that.

With any other form of heat, you’re free to adjust the thermostat as needed throughout the day. Again the DOE recommends 68 F as a balance between comfort and efficiency, but you may want to set the thermostat lower during the day when you’re not home and higher when you are home (a programmable thermostat makes this easy!).

If you’re going to be away and want to set the thermostat down, don’t go lower than 55 F. If your home gets too cold, your pipes could freeze and create a very messy situation for you when you return!

Whatever type of heating system you use, make sure you keep your filters fresh all season. Change them about once a month during times of peak heating system use. Just keeping on top of this can save you as much as 10 – 15 percent on your monthly energy bills!

Your water heater is usually the second largest energy consumer in your home, next to your heating system. Saving money on your water heating is not too complicated:

Fix all leaks when they happen! Even what looks like a small leak can waste hundreds of gallons of water per month—all of which you still have to pay for.

Take showers instead of baths. A normal shower uses about half the water of a bath, which also means less water heater needs, lower sewer costs, etc.

Use a flow restrictor to maintain water pressure while minimizing the amount of water use.

Don’t let the hot water run when doing dishes, shaving, or brushing teeth.

Like a heat pump’s backup heater, a space heater uses electrical resistance heat that can be expensive to operate. That said, they can be useful to heat small areas like the bathroom for short periods of time. In fact, it can be much cheaper to use a space heater in the morning than to raise the temperature in the whole house for a short period of time.

Low-energy LED lighting technology is the wave of the future. Are you still in the dark? Let us help you separate the facts from the hype surrounding this increasingly popular lighting option.

LEDs Last Forever

Like all light sources, LEDs will fade slowly over time. Depending on operating conditions, well-designed fixtures can retain 70 percent of their initial light output for 6 years, or 50,000 hours or more. If you run them 24/7, they'll last you twice as long as fluorescents and many times longer than incandescents.

The total cost of LED lighting over time can be significantly lower than conventional systems. Though initial fixture costs may be higher, LED fixtures have a longer useful life, are more durable and reliable requiring less maintenance and material costs, and use far less energy than their fluorescent and incandescent cousins. Annual lighting costs can be reduced by up to 80 percent, and payback on your investment can often be achieved in less than three years.

Waiting will cost you more in the long run. Lighting is often one of the greatest energy expenses of a business. Incremental price declines in LED technology will be more than offset by paybacks in energy savings. It does not pay to wait.

LEDs have been in widespread use for over a decade. LEDs have earned their place as a reliable lighting technology, having been used in critical safety applications and rapidly gaining popularity for industrial use thanks to their cost effective, efficient, sustainable, high quality light. Their impressive durability makes them a top choice for high intensity industrial applications such as manufacturing operations, warehousing, maintenance, and more.

LED lighting does not contain mercury. However, fluorescents and compact fluorescents (CFLs) contain hazardous mercury.

Thanks to advancements in technology, LEDs are ideal for these applications. A wide range of fixtures – from low to high lumen outputs – are available today, allowing for the selection of lighting perfectly matched to suit your specific business needs. Placement is essential to proper optics, so be sure to consult a professional to plan effective light placement.

LED lighting is “cooler” than other lighting colors.The blue hue of LEDs does vary from the yellow tones of traditional lighting. However, customers frequently cite an improvement in lighting quality and effectiveness following upgrades. If you have concerns, consider another hue in the ever-expanding variety of LED colors now available.

Well-designed LEDs offer convenient, targeted dimming settings. Quality matters. Well-designed LEDs can provide gradual dimming across many more increment than their competitors, offering targeted settings for the perfect combination of convenience, ambiance and energy savings.

LEDs don’t use magnetic ballasts – they use electronic drivers. Well-designed drivers don’t require replacement. Light bulbs, like incandescents, fluorescents, and halides, use magnetic ballasts that wear out over time, particularly with frequent on and off switching. LEDs do not share these characteristics because LEDs are semiconductors, not light bulbs. They require electronic drivers for managing power delivery. Look for electronic drivers with well-designed, integrated control features for the maximum in efficiency and functionalities - like dimming, sensing, and auto on and off capability.

Well-designed LEDs function beautifully in a wide range of temperatures. LEDs performed at least as well as fluorescents and HIDs in temperature tests conducted by independent labs, particularly in cold environments where other lighting technology suffers. However, quality matters. Opt for lighting that is carefully designed to manage heat dissipation – regardless of the climate you will operate them in.  

Well-designed LEDs manage glare and light placement with optics. Well-designed optics minimizes a direct sightline to LEDs, as well as glare, and color temperature for these applications is also excellent.

Don’t let old lighting technology leave your business burned out. Upgrade to LED lighting with the help of Mr. Electric® today.