Low-energy LED lighting technology is the wave of the future. Are you still in the dark? Let us help you separate the facts from the hype surrounding this increasingly popular lighting option.

LEDs Last Forever

Like all light sources, LEDs will fade slowly over time. Depending on operating conditions, well-designed fixtures can retain 70 percent of their initial light output for 6 years, or 50,000 hours or more. If you run them 24/7, they'll last you twice as long as fluorescents and many times longer than incandescents.

The total cost of LED lighting over time can be significantly lower than conventional systems. Though initial fixture costs may be higher, LED fixtures have a longer useful life, are more durable and reliable requiring less maintenance and material costs, and use far less energy than their fluorescent and incandescent cousins. Annual lighting costs can be reduced by up to 80 percent, and payback on your investment can often be achieved in less than three years.

Waiting will cost you more in the long run. Lighting is often one of the greatest energy expenses of a business. Incremental price declines in LED technology will be more than offset by paybacks in energy savings. It does not pay to wait.

LEDs have been in widespread use for over a decade. LEDs have earned their place as a reliable lighting technology, having been used in critical safety applications and rapidly gaining popularity for industrial use thanks to their cost effective, efficient, sustainable, high quality light. Their impressive durability makes them a top choice for high intensity industrial applications such as manufacturing operations, warehousing, maintenance, and more.

LED lighting does not contain mercury. However, fluorescents and compact fluorescents (CFLs) contain hazardous mercury.

Thanks to advancements in technology, LEDs are ideal for these applications. A wide range of fixtures – from low to high lumen outputs – are available today, allowing for the selection of lighting perfectly matched to suit your specific business needs. Placement is essential to proper optics, so be sure to consult a professional to plan effective light placement.

LED lighting is “cooler” than other lighting colors.The blue hue of LEDs does vary from the yellow tones of traditional lighting. However, customers frequently cite an improvement in lighting quality and effectiveness following upgrades. If you have concerns, consider another hue in the ever-expanding variety of LED colors now available.

Well-designed LEDs offer convenient, targeted dimming settings. Quality matters. Well-designed LEDs can provide gradual dimming across many more increment than their competitors, offering targeted settings for the perfect combination of convenience, ambiance and energy savings.

LEDs don’t use magnetic ballasts – they use electronic drivers. Well-designed drivers don’t require replacement. Light bulbs, like incandescents, fluorescents, and halides, use magnetic ballasts that wear out over time, particularly with frequent on and off switching. LEDs do not share these characteristics because LEDs are semiconductors, not light bulbs. They require electronic drivers for managing power delivery. Look for electronic drivers with well-designed, integrated control features for the maximum in efficiency and functionalities - like dimming, sensing, and auto on and off capability.

Well-designed LEDs function beautifully in a wide range of temperatures. LEDs performed at least as well as fluorescents and HIDs in temperature tests conducted by independent labs, particularly in cold environments where other lighting technology suffers. However, quality matters. Opt for lighting that is carefully designed to manage heat dissipation – regardless of the climate you will operate them in.  

Well-designed LEDs manage glare and light placement with optics. Well-designed optics minimizes a direct sightline to LEDs, as well as glare, and color temperature for these applications is also excellent.

Don’t let old lighting technology leave your business burned out. Upgrade to LED lighting with the help of Mr. Electric® today.

The energy saving power of lighting has quickly grown over the years, and still is to this day. In the commercial and industrial lighting space, a lot of companies are making the switch over from older technology lighting fixtures like metal halide and other HID lights over to LED fixtures.

On top of the energy savings LED can bring over older types of lights, commercial dimmers can yield even great energy reduction and thus a greater reduction in your facilities utility bills month to month.

So what is a dimmer, do dimmers save energy, and should I use a dimmer switch? Let’s find out!

A dimmer switch for LED lights gives you the control through a simple panel to change the amount of light that a lighting fixture (or fixtures) produces. You can dim lights as low as you so desire or as high as your light was designed to allow.

By having a commercial dimmer switch at your disposal, you can change the lights to match the mood, atmosphere, or even time of day to your needs and facilities guidelines.

Now onto the question you’ve all been waiting for, do commercial dimmer switches save energy?

The short answer is yes, dimmer switches do save you energy. But let’s discuss the history of dimmer switches and how far they have came.

Back in the day LED dimmer switches did not reduce energy because of the way they worked. Instead of reducing the amount of energy being used, they simply converted the energy not being used into heat instead of full illumination capability of the light bulb. Nowadays, dimmer switches for LED lights work by actually reducing energy used and only uses enough energy that it needs to power the light bulb at the setting of your dimmer.

Some of today’s dimmer switches use something called a “Triac Switch.” This Triac Switch works by cutting off power to the light fixture up to 120 times (variable) per second. Thus, the human eyes cannot detect a flickering and just see’s a constant flow of light. But while triac switches are used for smaller bulbs, bigger lighting fixtures use something called a send us a message and we will for sure help you out with that decision!

By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.

As a homeowner, you face loads of trials and tribulations. Home maintenance, jobs, relationships, and plenty more! Life is rough enough without adding the uninvited members of the animal kingdom into your home, and when you find a chewed wire, you’ve unfortunately got just that! But, hey, don’t stress. The experts at Kolb Electric are here to help!

Why do rodents chew on the wiring in my home?

Rodent teeth are very capable of doing serious harm to your wiring. Why do they even chew on wires? Well, interesting fact, that. A rodent’s front teeth never finish growing, so they chew on anything around to control the length of their incisors. Cool fact, but bad news for your wiring!

Rodents chewing on electrical wires can bring you a world of frustration at the minimum, but can be a source of serious harm at worst! An infestation left unchecked can cause:

Well, traps are always an option, of course. But that remedy tends to be a little unreliable. The unfortunate fact is there’s no magical remedy here. There’s no magical rodent-proof wire coating, or specially crafted mouse vacuum. It really comes down to prevention, and failing that, quick action. To prevent a rodent incursion:

What do I do if I already have a rodent problem?

Call a pest-control specialists right away. It’s frustrating, and costs money you didn’t want to spend, but with each passing week you run the risk of paying more than a few lost cracker crumbs. Rodents chewing on electrical wires is no joke, and left unaddressed will leave you in a bad way, electrically speaking.

Once the nests have been handled, call on an electric professional (like us!) to inspect wiring as soon as possible. Damaged wiring can be caught and fixed before you end up with a real costly problem on your hands.

If things don’t go your way and you end up with some damaged wiring, don’t stress! The experts at Kolb would love nothing more than to assist, bringing you the expertise and service you need to set your wiring right again. Contact us today to learn more about our repair and installation services, or to set an appointment!