There’s no question that LED lights are the best option for fleet vehicles—or any vehicle for that matter. They consume 90 percent less energy than incandescent bulbs and last about 42 times longer. Because fleet vehicles are constantly in motion, long-lasting LED lights can be of extreme benefit to trucking companies. A longer life span means dramatically lower maintenance and replacement costs as well as a reduction in downtime.

We have LED lights for Peterbilt, Kenworth, Freightliner, Volvo, International, Mack, and Western Star trucks as well as box trucks, tow trucks, dump trucks, and more. Options include LED tail lights, LED brake lights, LED marker lights, LED reverse lights, and LED clearance lights. These truck lights are available in a wide variety of styles, shapes, sizes, intensities, and connector types. Take a look through the categories below to see some of what’s available, and visit the links for complete product lists.

All of our LED truck lights meet DMV FMVSS 108 requirements and are protected by a lifetime warranty to guard against manufacturer defects and malfunctions. Mounting accessories are available under the accessories tab on each product page.

Options include multi-function combo boxes. Rear combination lights can be mounted vertically or horizontally on either side of box trucks, tow trucks, dump trucks, trailers, and flatbed trucks. The all-in-one lamps can be used as tail lights, brake lights, parking lights, turn signals, reverse lights, and running lights. Light heads can be rearranged for customized positioning.

Multi-function combo box lights have red and white LEDs and can be used as rear reflex reflectors, turn signal lights, hazard warning lights, reverse lights or backup lights, brake lights, and tail lights. Separate LEDs are positioned on the bottom of the box for license plate illumination.

One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.

For large projects, a simple notepad and pen are not sufficient to provide accurate and timely cost estimates to clients. The good news is that there are some pretty good estimating software programs now available that do the job. Both residential and commercial contractors can save time, money, and win more bids by providing professional job estimates. These programs also offer the ability to manage projects, bill clients, and keep track of change orders. They feature a wide range of options for any size of contractor.

TurboBid is one of the most well received and fully featured estimating programs on the market. It contains a user-friendly graphical interface and offers training courses through their website. The software can connect to national and local material supplier databases to keep pricing updated throughout the bidding process.

Change orders and revisions are simple. The software will generate automatic reports and professional presentations for clients. It also allows fine adjustment of man-hour estimations in different locations of the building. This includes ceilings. The program can account for different worker skill levels and upcoming wage increases for longer projects.

The built-in database includes tens of thousands of parts and full assemblies to allow for quick and easy estimation. The program incorporates national and local electrical code requirements to ensure bids are code compliant. In addition, it has a value engineering feature that suggests code-compliant changes to the customer’s blueprints. This can ultimately save money by adding, removing, or relocating devices.

Have you ever walked outside the house where your electric meter is mounted and heard a strange whirring noise? Was it the sound of the little hands on your frantically spinning around and around? If so, you were probably instantly alarmed. Every turn on that meter is costing you money. Your electric bill is going up right before your very eyes. How can you stop the wheels from spinning quite so fast? An electrician in Los Angeles is going to tell you how. At The Electric Connection we understand that every dollar counts and if you can keep a few more in your pocket things will be much better for you.

The following items are some of the biggest energy hogs in your home that are causing that meter to spin like crazy. Some you can control and others are just a part of life explains a Los Angeles electrician.

1-The refrigerator is costing you money. If you have invested in an energy efficient refrigerator, you are ahead of the game, but even those use a lot of electricity. The key is to make it use less by making sure the filter on the bottom and behind the refrigerator is clean.

2-A hot water heater is also going to cost you. You can limit how often it runs by shortening your hot showers and only washing full loads of dishes. Using the cold or warm setting on the washer is another way to cut back on hot water usage.

3-The air conditioning unit is probably one of the biggest culprits causing your meter to spin explains an electrician. Los Angeles residents definitely need to stay cool in the summer, but keeping the thermostat turned down too low isn’t really necessary. You can save some money on your electric bill by having a ceiling fan installed. The fan will circulate the cool air and create a slight breeze that makes you feel cooler.

Give The Electric Connection a call if you have any questions or would like to have a ceiling fan installed in your home.