As you can see, no matter which type of scenario that lighting comes up in; it matters. Whether you run an office or a huge industrial sized factory; the quality of your lighting is highly important.

We are going to list the most important points that qualifies “good” industrial lighting systems, what to watch out for, as well as what to be on the look out for when it comes to your commercial lighting purchases.

Quality of light being produced. The quality of light that your lighting system will make or break your lighting system investment. If you cheap out initially and go with cheaper light sources such as HPS, you will regret it in the long run. Not only does LED typically offer a better CRI score, but it has many other benefits such as…

Do you want rebates for your lighting investment? If so; buy DLC qualified.

Conclusion

It is important you not only feel safe in your home, but are actually relatively safe from most things. We know there are always hidden dangers around us. We can be ready to deal with these things and there are a few little things we can do around the house to help alert us to those safety issues. An electrician in Glendale has some safety tips that will make your home safer and make you feel a little more comfortable and safe when you and your family are home or away. The team at The Electric Connection can help you get these safety measures taken care of.

GFCI Outlets

These outlets can prevent electric shock. They are designed to shut off the instant the circuit is interrupted. These outlets are generally placed in bathrooms and kitchen areas. If an appliance comes into contact with water while plugged in, the outlet trips, cutting the current and preventing shock.

Electric Panel Inspection

It doesn’t hurt to have a Glendale electrician take a look at your electric panel. It may not look like much to you, but to the trained eye of an electrician, it can say a lot. You will learn about the condition of your breakers, the panel itself and the wiring that powers your home. If you have been having trouble with tripping breakers, this inspection will help you learn why.

Carbon Monoxide Detectors

All homes should have at least one carbon monoxide detector installed explains an electrician. Glendale homeowners can install the detectors themselves. They are usually battery-powered and can be placed in the home to alert you to carbon monoxide levels that are too high.

Smoke Detectors

You probably already have a couple of these in your home, but it doesn’t hurt to have a couple hard-wired smoke detectors installed as well. You can never be too safe.

Give The Electric connection a call today and schedule your safety upgrades.

Do you own electrical equipment that is overheating? If you’ve noticed any of your electrical devices, like a toaster or a radio, overheating you may have a serious electrical problem on your hands. Fortunately, at Kolb Electric, we have just the tools to diagnose and fix the problem.

Overheating of electrical devices can be caused by a number of problems. From faulty wiring to an outdated electrical system, it’s important to get to the bottom of an overheating electrical device.

At Kolb Electric, we offer thermographic inspections for your home or business. A thermographic electrical inspection will test the equipment’s temperature against the temperature of surrounding components. Significant variations in temperature indicate electrical problems in your appliances and equipment. Temperature abnormalities are often due to defective or failing components. By catching problems early on, they can be corrected before they can cause even greater damage later.

If you manage a home-based business that relies on several pieces of electrical equipment, it is especially important that you routinely schedule thermographic electrical inspections in MD, VA, or DC in order to prevent your important equipment from malfunctioning.

A thermographic inspection is completely non-contact and safe to perform on energized electrical systems. Thermographic electrical inspections can be conducted while your equipment is still in operation, which means you won’t lose time by having to shut down your equipment.

When combined with traditional home inspection techniques, the infrared thermography inspection method reveals considerably more about your house than can be seen with conventional inspection tools. Some things our infrared thermography inspections have detected include:

Water leaks: using an infrared camera to scan the inside of your home can reveal moisture leakage around plumbing systems, the roof, any windows, etc. We’ll be able to see them because areas with more moisture will appear darker than surrounding warmer, dry areas.

Insulation deficiencies: our scanners will reveal large temperature differences within your home where insulation is deficient or absent.

Roof leaks: we’ll be able to spot water and moisture intrusion and accumulation below the surface of your roof, which can help you pinpoint leaks and lessen their effects before they do major damage to your home.

Electrical system problems: one of the best things about an infrared thermography scan is that it helps you see any deficiencies in your electrical system, including loose connections that could cause certain appliances to run inefficiently (or to not run at all).

Structural issues: finally, infrared thermography scans will help locate structural issues within your home, including poor heat transfer, bad conductivity, and more. We may even be able to detect missing or damaged structural components.

For all your infrared thermography needs in Maryland, Virginia, and Washington, DC, contact the electricians at Kolb Electric today—877-287-1179877-287-1179 or click here!

There’s a lot of scary information floating around when a discussion regarding electricity is at hand. Some of it is very valid, and some might be considered a bit of an exaggeration. But one area we really like to nail home is the dangers of a power surge. These are frighteningly common, and present very real danger to both you, and to your electronics. Protect yourselves (and your investments!) by learning how to prevent surges, and how to mitigate the possible threat they pose. 

Generally speaking, power is always “surging” to a minor degree. Every time a machine kicks on, or you flip a switch, the course and amount of power in your home fluctuates slightly. But more specifically, what we call a power surge is a dramatic and large spike in the current of your home.

This spike is exceedingly brief (somewhere in the neighborhood of a thousandth of a second), but can carry some real risk. More often it carries a risk to your possessions than your person, but you put a lot of money into your investments. Protect them!

Protecting your home from surges is actually pretty simple. It just takes a little preparation, a minor investment and a little bit of your (or our!) time:

You probably noted how adamant we were about that last one. So what’s the big deal? We could note a bunch of anecdotes about how a friend of a friend regretted not getting one, but let’s stick to the facts. Like we said, surges happen all of the time. Most of these are caused just by the general goings-on of a household. Whole home surge protection is hands down the number one most effective method of keeping you and your home safe.

Without getting too technical, a whole home electrical surge protection system policies and assists in maintaining proper, safe currents in your home. Do you have to have one in your home? Not really, they aren’t code yet. Should you get one? Absolutely. Surges can cost you huge money, and whole home protection is a very cost-efficient safety measure.

Want to learn more about how the expert electricians at Kolb can help you and your home stay safe? Contact our team today!