If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.

We are very proud of our LED Retrofit Kits – DesignLights Consortium came out with a new standard, Version 4, that allowed the most efficient LED Retrofit Kits a higher efficiency category. So be careful, there is no need to purchase DLC Standard LED Retrofit Kits when there are DLC Premium Qualified LED Retrofit Kits available. And this is important, because the more efficient the product is, the more you save. And the savings don’t end there. The whole reason for the more efficient standard was to offer larger utility rebates at time of purchase.

So you save 2 ways: potentially at time of purchase and over the life of the product. Let’s do the math, because the numbers don’t lie.

If you cannot answer this question with confidence please ask yourself…  WHO DID I JUST LET INTO MY FAMILIES HOME?  Many people have made this mistake and some paid the ultimate sacrifice.  Some just fell victim to theft, such as the scam where a handyman would offer services to gain access into someone’s home and then steal from them.  You can read more about this crime here.  Unfortunately, there have been more victims experiencing much worse crime.  We do not need to get into the details for the purpose of this blog but we have all heard about them on the news, social media and the stories are very easy to find and numerous.

An electrician on drugs is a recipe for disaster.  Yes an electrician on drugs may not intentionally try to harm you, but how many traffic deaths happen every single hour in the US from people under the influence of drugs or alcohol?  You wouldn’t let a person under the influence of drugs or alcohol drive your children to school, so why would you let them perform electrical work in your home?  Our service electrician’s undergo a drug screen and are also subject to random checks throughout the year.

Our service professionals undergo a thorough background check before being hired.  We won’t just send anyone into your home.  We are going to send a true professional that meets our stringent guidelines.  He is not going to steal from you.  He is not going to harm you.  He is there to help you.  Our electricians truly care about you and the work they are performing for you.

We are here to serve YOU, our customer!  We want a customer for life.  We are not here to steal from you or take advantage of anyone!  We are here to provide a VALUABLE service to you.  We will stand behind our work and make sure you are 100% satisfied.  We guarantee it with the way we act in our organizations culture, and also in writing.  If for some reason you are not 100% satisfied please let us know.  We will not leave until we get it right.  It’s our guarantee to you, our valued customer.

Many contractors say that.  You win some you lose some.  Not with us!  No we do not get every job we bid on, but we realize there may be other factors at play.  What we care about is you truly understand the price presented to you.  You know what options and solutions you have.  You know what will be done, how it will be done, and that we will stand behind our work.  You know the value you are getting when you choose Custom Electrical Services.

It’s common to be nervous when a service person shows up to your home.  Your thinking how much is this going to cost me?  Am I getting the best bang for my buck?  Do I have other options?  At Custom Electrical Services, our technicians are trained for this.  We will work to put you at ease and make sure you fully understand everything presented to you.  We will take the time to fully evaluate your situation and present it to you in a professional manner that you can understand.  Price is not everything.  We will not change the price of the work performed.  The straightforward price you receive will not change if it takes our electrician longer than expected.  You won’t be left thinking, “I hope he can work faster so my bill will be less”.  Lets think about this common statement for just a second.  Would you really want a mechanic hurrying up to put new brakes on your families car?  Of course you wouldn’t!  You would want the mechanic to perform the job as best as possible.  And that is our promise to you.  Give you the best possible job and the most reasonable rate possible.  We are professionals.  We are Custom Electrical Services.

But wait!  A Custom Electrical Services technician is not just there to give you an estimate or fix that minor problem you called about.  We are here to truly help you.  When is the last time someone checked the connections in your electrical panel?  1 year, 10, or never?  Electrical connections can loosen over time.  Electricians are trained to look for this.  As part of our service fee we will inspect your breaker box or electrical panel.  Identify any problems such as loose connections, non code compliant breakers, under sized wire, corrosion, heat, and more!  What if you have an old Federal Pacific Panel and you didn’t even release the dangers they present.  Our technician will identify and let you know of any potential safety problems.

Are all of your smoke alarms and carbon monoxide alarms functioning properly?  For no additional charge we will test all your smoke alarm units and identify any that are not functioning properly.  We will also replace all your batteries at the same time.  It is all part of the service designed to keep you, your family, and your home safe.  Our commitment to you!