By Spencer Cutright

Crowds are packing amusements parks this summer as they look to let out their inner adrenaline junkie. With more than 400 amusement parks and 786 roller coasters in the U.S., there are plenty of rides to choose from. Mr. Electric® presents our favorite list of the top five roller coasters with gut-wrenching drops, jaw-dropping loops and stomach turning speeds that are sure to give surge to your summer.

This menacing roller coaster in Jackson, New Jersey at Six Flags Great Adventure, is not only the world’s tallest roller coaster, but also the world’s second fastest. Riders are launched at 128 miles per hour and reach a height of 456 feet before plunging back down to ground level.

Featuring the world’s largest loop, this Six Flags Magic Mountain coaster in Valenica, California catapults riders at 66 miles per hour before being sent into a massive 160-foot loop.

This high adrenaline coaster is packed with twist, turns and loops. Located at Sig Flags Fiesta Texas in San Antonio, Texas, riders reach top speeds of 70 miles per hour and must endure a 145-foot loop, a cobra roll, two corkscrews and even a zero gravity roll.

The first roller coaster to ever use floorless trains, this Busch Gardens Williamsburg coaster features two Immelmann loops, two vertical drops and a splashdown. The coaster also reaches a top height of 2,005 feet and a top speed of 71 miles per hour.

Located at the world famous Cedar Point in Sandusky, Ohio, this coaster sends riders on a terrifying 300 foot drop, two tunnels, three overbanked turns and reaches speeds up to 93 miles per hour.

We hope you have an electrifying time and enjoy these rides as much as we do. As always, remember to call on your friendly neighborhood Mr. Electric for any summer electrical needs.

As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.

Smoke detectors are an important part of safety in the home. These cheap little devices can save your home and your life. If your lucky, the only time you’ve heard one go off is when the toast burnt. It’s easy for us to forget to check on them or even forget to test them after purchasing a new home. But they should not only be checked regularly, but require correct installation. Let’s go over some of the basics of having smoke detectors in the home.

Having smoke detectors placed in various locations around your home allows for fast and effective detection. Once the smoke detector siren sounds, it will warn you that there is a potential fire. You can quickly check the nature of the problem and hopefully prevent any further damage. It will also wake you at night before any harm can come to anyone in your home. The siren also helps firefighters quickly locate the fire in the home so they can focus their efforts.

Because smoke rises, smoke detectors are always placed on the roof for ideal detection. There are two common types of smoke detectors, photoelectric and ionization. Photoelectric sensors use a beam of light within the detector to sense any smoke in the air. The beam will shoot in a straight line when the air is clear. In the presence of smoke the light will scatter, this is when the alarm will go off. Ionization detectors use a chamber with a small electrical current. When smoke enters the chamber and the level of ions in the air changes, the electrical current drops and the alarm will sound.

It is recommended that there are smoke detectors on each floor of your home. If doors to rooms are closed often, it is best to have a detector installed in that room. The device should be placed away from rooms that create steam, such as showers or a laundry room, as this steam could trigger the smoke detector. Most smoke detectors use double sided tape to stick the device to the ceiling. You will need to drill the mount to your ceiling and attach the smoke detector to the sticky mount. Ensure that the batteries you use are working properly.

Smoke detector testing should be done on a monthly basis because batteries can die and sensors can become faulty. Each smoke detector will have a button on it to manually sound the siren. Push this button for a few seconds to ensure the siren is working correctly and the batteries are still active. To test the sensor, you can use an aerosol can of smoke to spray into the smoke detector. It may take a couple minutes for the siren to deactivate, as the smoke needs to clear from inside of the chamber first.

Smoke detectors are vitally important to keeping your home and family safe. We can help you to install smoke detectors around your home and position them to give you the best coverage.