Among the more obvious pieces of electrical safety advice you may have encountered is to never saw the third prong off of an electrical plug in order to fit it into a two-prong outlet. But just because we can recognize that as a self-evidently bad idea doesn’t mean everyone knows why it’s dangerous.

Two-prong outlets have only two wires: a hot wire and a neutral wire. But a three-prong outlet also has a ground wire, which is a safe place for unexpected bursts of current to go when they occur. Without that connection between the ground wire and the plug, wild current can go anywhere: into your electrical device, where sensitive components can be destroyed, or worse, into your body. Shock and electrocution are more likely to occur when no ground wire is present.

Moving On Up

Three-prong outlets didn’t become standard in North American homes until the late 1960s, so while modern homes should be in good shape, there are plenty of homes out there with old two-prong outlets.

As a quick fix, you might be tempted to use adapters that convert two-prong outlets to fit three-prong plugs. You should resist the urge to use these so-called “cheater plugs”, however -- the ground wire is there for safety, and simply bypassing it creates a potentially serious hazard.

Instead, you should seriously consider upgrading the outlet if you need to regularly use three-prong plugs in that area. If you live in an older home where most of the outlets are two-prong, this is an upgrade you’ll need to do sooner or later.

When it comes to upgrading two-prong outlets, there are two basic options. The best choice is to have ground wires installed so that the outlets are fully up to the current standard. Unfortunately, this can involve several hours of electrical service and may require some cutting into walls, depending on how many outlets are being upgraded and how the home is configured. It may be a big undertaking, but it’s a quality investment in your home and safety.

A cheaper alternative is to upgrade to a ground fault circuit interrupter outlet, or GFCI. These outlets are capable of shutting themselves off if an electrical shock risk is present, but they won’t protect sensitive electronics from surge damage. The trade-off is that there’s no need to run a ground wire.

Out With the Old, In With the Old?

If you don’t like either of these options but you’re having trouble with a two-prong outlet, it’s technically not a violation of code to replace the outlet with another two-prong version. Just keep in mind that this arrangement leaves both people and electronics vulnerable, so use these outlets with care and consider making a plan to upgrade later.

Ready to upgrade those old outlets? Start the process today by scheduling a no-obligation consultation with your licensed, local electricians.

How old is your home? Has your electrical system been updated within the last 5 – 10 years? If you haven’t asked these questions recently, it’s probably time to examine your options! Older homes with older electrical systems aren’t typically able to handle the stress of modern electrical appliances. So what can you do to make sure your home can safely run all of your appliances and electronics? Typically, a heavy up can be the answer to your problems. But should you install one? Let the experts at Kolb Electric answer!

A heavy up is an increase in the amperage (power) of your main electrical service. But how can you know if your home is in need of an increase of amperage? There are some things you can check to make sure you’re in need:

Depending on your specific goals, you have a range of upgrades available when thinking about a heavy up. Some service upgrades are as simple as adding a few additional circuit breakers to the existing box, or expanding the box with a subpanel. More complex upgrades may include things like replacing a fuse box or an aging panel with one that allows for higher energy capacity. A Kolb Electrician can evaluate the condition of your current panel with any problems you are experiencing to determine how extensive your upgrades will be.

The time depends on the job. Adding additional breakers to an existing panel is usually pretty quick, often taking less than an hour. Installing a subpanel is not too complicated either, often taking no more than a few hours.

Where it starts to take a long time is when you need to make serious upgrades. If you need to replace a fuse box or circuit main, you could be looking at a job that takes all day.

There’s a lot of scary information floating around when a discussion regarding electricity is at hand. Some of it is very valid, and some might be considered a bit of an exaggeration. But one area we really like to nail home is the dangers of a power surge. These are frighteningly common, and present very real danger to both you, and to your electronics. Protect yourselves (and your investments!) by learning how to prevent surges, and how to mitigate the possible threat they pose. 

Generally speaking, power is always “surging” to a minor degree. Every time a machine kicks on, or you flip a switch, the course and amount of power in your home fluctuates slightly. But more specifically, what we call a power surge is a dramatic and large spike in the current of your home.

This spike is exceedingly brief (somewhere in the neighborhood of a thousandth of a second), but can carry some real risk. More often it carries a risk to your possessions than your person, but you put a lot of money into your investments. Protect them!

Protecting your home from surges is actually pretty simple. It just takes a little preparation, a minor investment and a little bit of your (or our!) time:

You probably noted how adamant we were about that last one. So what’s the big deal? We could note a bunch of anecdotes about how a friend of a friend regretted not getting one, but let’s stick to the facts. Like we said, surges happen all of the time. Most of these are caused just by the general goings-on of a household. Whole home surge protection is hands down the number one most effective method of keeping you and your home safe.

Without getting too technical, a whole home electrical surge protection system policies and assists in maintaining proper, safe currents in your home. Do you have to have one in your home? Not really, they aren’t code yet. Should you get one? Absolutely. Surges can cost you huge money, and whole home protection is a very cost-efficient safety measure.

Want to learn more about how the expert electricians at Kolb can help you and your home stay safe? Contact our team today!

You have probably become so used to smoke alarms you rarely even notice they are in a room. That means you don’t notice when they are not around either. Or if they are working properly or placed in an appropriate place. Smoke alarms are one of those things that we ignore until we burn toast and remember we have them. Then they become an annoyance and the batteries are popped out with the intention of replacing them once the smoke has cleared out. Unfortunately, because they are so easily forgotten, they are often not replaced. An electrician in Glendale, like those at The Electric Connection, has a few facts to tell you about smoke alarms. These facts remind us why those little white discs in the corner are so important.

1-Smoke alarms need to be replaced every ten years. Most people assume they are good forever.

2-30 percent of home fires are in homes that have expired smoke alarms or no smoke alarms at all.

3-It is imperative you test your smoke alarm every month. A Glendale electrician points out it takes less than a minute to complete this potentially life-saving task.

4-Batteries should be replaced in each smoke alarm every 6 months, regardless if they are working. Fresh batteries are best.

5-Opting to go with at least one hard-wired smoke alarm on each floor is a good option. These will be installed by an electrician. Glendale homeowners can rest assured they will always have protection whether the batteries are fresh or not.

6-Every bedroom in the house should have a smoke alarm. A smoke alarm should be on each floor as well. 66 percent of homes do not have the minimum number of smoke alarms recommended.

If you would like to add another layer of protection and have hard-wired smoke alarms installed, give The Electric Connection a call today and schedule your installation.