If you’re longing for a bulb that’s going to save energy and that lasts, this LED bulb replacement guide is a great place to get a feel for the type you might need. Other than finding a bulb that fits the socket, has the correct voltage, and meets wattage requirements, there’s no list of rules as to what bulb you should use in a certain fixture. This guide shows that even the same type of fixtures can require or accept different bulb types. LED replacement bulbs are available in a variety of wattages, intensities, voltages, and with different base types; they can even emit different colors of light. You have the freedom to choose a bulb that fits your needs, and there are plenty of available options.

Clicking each picture below will direct you to a page of similar bulbs. Keep in mind, this post just touches the surface of available LED bulbs. If you don’t see what you need, use our site to see hundreds of lighting options.

Track light fixtures are found in many homes and allow for aimable illumination exactly where it’s needed. These fixtures almost always contain MR11 spotlight bulbs. In addition to track lights, these bulbs are often used in recessed, pendant, display case, and desk light fixtures. MR16 and MR11 LED replacement bulbs have GU10 or GX5.3 bi-pin bases and are available in a wide variety of styles with many LED configurations.

Picking the right electrical equipment is essential no matter what line of business you’re in, so take your time with the selection process. It is especially crucial for companies in the food processing industry to pick the right cord grip and connector materials, since machinery and fittings at these plants are often exposed to harsh chemicals, water and other environmental threats, which can lead to corrosion, leakage and damage.

Electrical connectors for food processing plants normally feature corrosion-resistant properties, with different degrees of resistance for various environments and applications. Picking the wrong material will not just cause your connectors to require more frequent maintenance or repairs, but can also lead to short circuits and other safety hazards.

Electric cars are very economical—if you use them right. Most people don’t and end up paying nearly as much as the owners of small, gas-powered cars. This is because the electric cars are often not charged as they should and the electric car owner is forced to rely on the gas in the tank to drive the car. You can change this by investing in a Level II charger. In order to use the charging station at home, you will need to give an electrician in Beverly Hills a call. You can always depend on the team at The Electric Connection to send out a reliable, professional electrician to get the job done.

The fast charging systems require a large 240-volt outlet. These are not typical in most garages and carports. If you have had your home custom built, you may have already had one installed. The outlets are the funny looking ones that your air conditioner or dryer plug into. Because the chargers require more electricity than a standard Level I charger, you will need a breaker dedicated solely to your Level II charger.

If you are not sure if your electric panel can support an additional breaker, don’t worry about it. An electrician will let you know during the Beverly Hills electrical inspection. It will be one of the first things the electrician checks for. If the panel doesn’t have the room, an upgrade will be necessary, which is something the electrician will handle.

The investment of the faster system and the electrical outlet is well worth the cost. You will be able to save a great deal of money on your weekly gas bill by relying on your charged electric car rather than gas. Give The Electric Connection a call today and schedule your initial inspection for a Level II charging system installation.