There was a time not too long ago when gas and electricity costs weren’t really a topic of concern at all. Keeping in view expenses such as mortgage payments, insurance etc, energy bills faded in comparison. However, that is no longer the case today. Energy costs have become a major concern for property owners and the need of the hour is for energy – efficient solutions to be incorporated into the home.

And there is no dearth of these types of solutions. Ranging from LED bulbs, use of solar energy, smart lighting, optimum insulation, use of energy-efficient building materials, switching from standard ovens to convection ovens, people are trying everything in the book to coax their energy bills to drop a little bit. While all these measures are definitely helpful in bringing down energy consumption, there is one more thing consumers can do to keep a handle on their energy bills- use smart lighting schedules!

Energy providers in Australia charge consumers a variety of rates; this is based on the type of meter in the house and the manner in which energy is used in peak & off-peak periods. There is no standard rule here as different retailers maintain different energy rates. The one way to get a much reduced rate is to opt for a long-term energy contract. It’s important to shop around a bit as the difference in rates between providers can be significant.

Off peak times are those when businesses and homes typically use less electricity. The off peak time is dependent on your meter type and location; however, these are typically on weekends and/or at night. When consumers use electricity in busy peak times, it burdens the electricity networks in the country. It’s also why energy usage in the off-peak hours is charged at much lower rates. This is the way consumers are encouraged to use power outside busy hours.

There is another definition of off-peak rates. This can refer to the electricity used by a particular appliance on a dedicated circuit. For instance the electric hot water system in your house could be on a separate circuit and will be billed separately, on the off peak rates your service provider is offering. It’s possible to leverage this off-peak rate to reduce energy costs in your home. You can use interval metering or off-peak hot water to benefit from these lower rates at set times of the day and the weekends.

If you are considering using smart scheduling, it’s important that you contact your energy provider and find out if it’s something they accommodate and what you are required to do. For advice on smart metering and other electrical installation services, call Allround Electrical at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

Plan on hanging a lot of lights or putting on a display this holiday season? If so, you need to make sure your electrical panel can handle the electrical load! So before you start plugging in all of those fancy lights and fun electronics, read along with the team at Kolb Electric to find out if you need to be making a call for an electrician in Columbia.

Looking for help with a heavy-up panel upgrade, or need some other professional electric services? Contact Kolb Electric online today!

A heavy-up, also known as a panel upgrade, is simply an increase in the amount of amperage coming into your home. Your home essentially is capped at a certain allowed amperage for safety reasons. Your amperage limit directly relates to the electrical needs of your home.

On whether or not you need one, it depends on a few things. Heavy-ups are most commonly needed when a home’s demand for safe electricity exceeds its capacity, or if you just haven’t had one in a long time. As your electrical needs evolve (which they do very rapidly in modern homes), through getting more appliances, electronics, and entertainment tools, your need rises as well.

Put simply, people just need more power during the holidays. We find that more and more folks call in for an electrician in Columbia most often late November through the end of the year. Usually people start plugging up those light strands, and all of those nice decorations, only to find that they keep tripping breakers, or experience electrical complications. A heavy-up is the answer to this issue, as it ensures you have an adequate and safe supply of power going forward.

Signs that it’s time for an upgrade:

Suspect you might need to be looking into an upgrade? If you’re not sure, our team can help! The certified electricians at Kolb are always happy to help, and with our years of experience and top-class tech, we can help you determine if it is indeed time for a panel upgrade. Contact an electrician in Columbia today by calling 877-287-1179, or reach us any time online!

Every home uses energy in one form or the other; and in most instances, this electricity comes from the power grid. Statistics indicate that almost 50% of a home’s energy is used by its HVAC systems while about 12% goes into the lighting. Most property owners presume that all the energy-efficiency upgrades happen through various home improvement upgrades such as replacement of wooden windows and doors with energy-efficient 2 or 3-paned vinyl windows etc.

While these changes do add to the energy-efficiency of your home, there are a number of electrical systems and maintenance upgrades that can significantly improve your energy usage, such as:

It’s not uncommon for us to occasionally leave the lights on when we leave a room. Or there may be times when we leave the deck, patio or poolscapes lights on all night with the security aspect in view. These types of habits can become a significant energy drain, but there is a way to curb that. We can install motion sensor lighting in the exterior spaces of your home; the lights will get switched on only when the sensor picks up any movement within its range. This helps you save energy without compromising on the safety factor in any way.

Most people don’t realise that their local electrician can help them when they are upgrading to energy efficient appliances. The fact of the matter is that simply replacing older appliances with ones that have high energy star ratings may not always help them reduce their electricity bills.

When you upgrade the appliances in your home such as air-conditioners, dryers, dishwashers and washing machines etc., these appliances tend to need a higher wattage compared to the older ones; this means the upgrade may actually strain the circuit breakers and your electrical system. It’s important to get a skilled electrician to come and check whether the existing wiring and system is built to bear the higher electrical loads that the newer, advanced systems need.

Inadequate or improper insulation is one more major sources of energy loss on most properties. And if you are considering a home renovation/remodelling/extension project, it’s a good idea to upgrade the insulation in your house as well.

Today, many property owners are quite committed to opting for eco-friendly alternatives to many materials and systems. If you feel you want to reduce your carbon footprint, you might want to consider installing solar panels in your home. This can significantly reduce your reliance on grid power.

Upgrading appliances or making major electrical upgrades can sometimes prove to be an expensive proposition and may not fit into everyone’s budget. This is why it’s important to know how to make some smaller changes that will also add to your home’s energy-efficiency. Some things that can make a big difference are:

There are certain jobs you’ll do in your home over the years that require nothing but some basic knowledge and a YouTube video. Electrical work, however, is not one of these jobs. Electrical jobs can not only be dangerous, but can also lead to property damage if not done correctly.

But how do you go about finding a true professional? Certainly, you want a service provider you can trust to do the job correctly and safely, and you want a job you can rely on. Keep reading to learn more about what separates a professional electrician from the rest.

Electrical work is very complex, and learning how to do it correctly requires many hours of education and training. Check to ensure that any electrician you choose to work with has the training and the proper certification required for your job, and for your zoning area.

In addition to being adequately licensed, any handyman you invite into your home to perform work should also be insured. If not, you’d be liable for any injuries or damages that occur when they work on your property.

NEC stands for the National Electrical Code, and is a code that outlines the standards for the safe installation of electrical wiring and equipment in the United States. Any type of building code can be updated at any time, so it’s vital that your electrician is aware of changes and is able to communicate them clearly to you.

Don’t hire an amateur electrician with whom you are unsure of or try to attempt a DIY electric job. Instead, rely on the professionalism and expertise we have on our team.

 Illuminate anything from skateboards to yard games, and transform them into unique, eye-catching displays that you can use anywhere. single colors or

Perfect for tailgating or late-night stargazing—portable LED light strips make the perfect truck bed lights. They’re easy to install and are a great way to add colorful illumination without having to do any vehicle wiring. Adhere the strips to your truck bed with their adhesive backings, and mount the battery pack in a covered location so that it’s not exposed to water.

Let your little one ride in style with LED strip lights on their wagon, stroller, or ride-on Power Wheels vehicle. These portable LED lights are super simple to install and can be set to one of many exciting single-color or color-changing modes. They will not only capture the attention of your baby, but they’ll also provide increased safety and visibility for evening walks or events.

From movie, theater, or extravagant Halloween props to models and costume figures—portable LED strips lights will take your project to the next level. They’re available in several shades of white as well as pink, UV, blue, green, yellow, amber, red, or color-changing RGB to match any theme or design.

Decorate your skateboard or scooter with LED strip lights, and differentiate yourself from the crowd. The portable LED lights are easy to apply, and you can use the wireless RF remote to control single-color or color-changing modes while you ride.

Brighten up your next tailgate party or camping trip! Install portable LED strip lights on canopy tents, sun shelters, instant canopies, pop-up shelters, or E-Z UP Instant Shelters. A variety of colors are available—including “Bugs-Away” yellow—and the strip lights provide up to 402 lumens of illumination.

With portable LED strip lights, you can create a lighted wreath, garland, or other holiday decor that’s unlike anything storebought. Colors are available for every holiday, and the attention-grabbing strip lights have several modes from flash to strobe to fade and more.