Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

Electrical installation testing is a practice that has become more important over time. This is due to the increasing complexity of installations in both commercial and residential spaces. When it comes to electrical work, the top priority is always going to be safety. This focus is the reason electrical standards and wiring regulations exist in the first place. Electrical installation testing serves the purpose of identifying any possible deficiencies. These shortcomings could be areas in which an electrical system doesn’t meet regulations.

It’s important to have older electrical systems looked over to ensure they’re still in good working condition. At the same time, new installations need an inspection to make sure they conform to today’s stringent standards. You might also feel inclined to have testing done if you’ve recently purchased a building with preexisting installations. If you’re curious about what makes electrical installation testing so complex, or if you’re wondering why only a professional should be doing it, read on for more information.

There are different phases of an electrical installation to keep in mind. The first step is to perform a visual inspection, which is exactly what it sounds like — an expert will confirm the permanently wired electrical components are compliant with safety regulations. He or she will make sure there are no outward signs of damage, and that the required safety measures are present.

After the visual inspection, electrical testing begins. This is where having a qualified individual working becomes even more critical. Everything from specialized training to safety-oriented clothing is necessary for this aspect. In fact, non-authorized people might have to keep a certain distance away from the testing itself.

The testing will cover a building’s wiring, as well as its various components. This can include electrical panels, outlets, distribution boards and lighting. Essentially, the examination covers all systems that conduct electricity within a building. The electrician will use the tests to make sure every necessary precaution is in place to reduce the risks of injury or death due to electrical shock.

In some cases, the testing will call for exploratory work to complete the job as effectively and safely as possible. Parts of the system might need to be temporarily shut off for this. This means you should make sure you don’t have something important — and electricity-based — going on while the installation testing is taking place.

One of the most important factors to consider when designing an outdoor kitchen is the lighting. Outdoor kitchen lighting needs to serve a variety of purposes, including but not limited to: task lighting so the grill master can see what they’re doing, ambient lighting for people to see, and walkway lighting to shine the way from the house to the outdoor kitchen. In this blog, we’ll be going over the best types of lighting for various goals your kitchen needs to accomplish.

Remember: whatever type of lighting you choose for various areas, it should always be rated for use in outdoor environments. Even if you have a solid roof or cover above your outdoor kitchen, you want to make sure your lights can function safely in wet or damp environments.

One of the most important elements of outdoor kitchen lighting design is task lighting around the grill. This is mostly a food safety issues: the grill master needs to be able to see whether the food is cooked properly before he or she can serve it!

Grill task lighting can be accomplished with either Halogen or LED bulbs. The most important thing is that you get a nice, bright white light—this will help you see most clearly and ensure that the food coming off the grill tastes good, is presented well, and most importantly, is safe to eat.

In addition to lighting the grill, you want to make sure all cabinets are appropriately lit. This can also be done with LEDs, which can be installed under lips in the cabinet so you won’t be able to see the lights themselves—just the glow they cast. Such lighting can enhance the aesthetics of your outdoor kitchen area while making it easier to see what you’re doing while cooking.

Once the grill lighting has been figured out, the next thing to do is make sure your eating areas are properly lit! The main goals for lighting eating areas should be as follows:

The best type of lighting for outdoor eating areas is LED, which is highly efficient and durable. When it comes to keeping insects away, meanwhile, one of the best things to do is install a ceiling fan, which can be wired with lights and will discourage insects over a wide area.

Last but not least, it’s important to make sure you have adequate lighting along any pathways from your home to your outdoor kitchen. Walkway lighting can be accomplished with any type of low-voltage lighting, but we prefer LED for this task—they’re efficient, long-lasting, and get the job done better than any other type of lighting.

The right lighting can make all the difference when it comes to your outdoor kitchen. For outdoor kitchen lighting, or any type of low voltage outdoor lighting in Maryland, Virginia, or Washington, DC, call Kolb Electric today!

Electricity is like a kitchen knife. If you use it wisely, it can cut food and prepare delicacies. If you use it unwisely, it can end up cutting your finger. Electricity flows through anything that is a “conductor.” Interestingly, humans are very good conductors of electricity!

Since electricity is a form of energy, a strong current has the ability to seriously harm you. If the current is strong enough, you can be fatally injured. Due to the strong possibility of a fatal injury occurring, electric cables are insulated. Another important reason why they are insulated is to prevent energy from dissipating into the surroundings, allowing it to be conserved.