With little ones crawling around the floors, it is hard to always keep an eye on what they are doing all the time. Electrical outlets are at the perfect height for them and seem to be the most interesting thing to investigate. This convenience leads to hundreds of children suffering severe shock (electrocution) each year. This is why tamper resistant outlets are so important. If your home is missing tamper resistant outlets, it may be time to upgrade.

A tamper resistant outlet looks just like a normal outlet, to the untrained eye but have important mechanisms behind the plastic to ensure that nothing foreign can find their way into electricity. Behind the two top prong holes is a small plastic panel. This panel slides across to cover the prong holes. If a child approaches the receptacle with a key or other narrow object with the intention to insert it into the outlet, the plastic panel will prevent them. No matter how much force they apply, it will block the foreign object from entering the outlet and allowing electrical current to escape.

If this plastic panel is preventing objects from entering the prong holes, how do you plug in your normal devices then? The trick to this is that pressure must be applied equally through both prong holes in order to slide the panel to the open position. If there is uneven pressure, the panel does not move. This is how it can prevent paperclips from entering, but operates seamlessly when plugging in a lamp.

Tamper resistant outlets can prevent serious injuries to children. If you have a young one making their way around your home and you aren’t sure if you have tamper resistant receptacles, now is the best time to check. Contact your local Expert Electric at 604-681-8338. We can help to identify what kinds of outlets are used in your home, and upgrade them if needed.

Twilight Designs in Las Vegas, flush mount (recessed) step lights are often the fixture of choice when used indoors. He credits this to how easy it is to cut into and run wiring through drywall, especially when installing step lights after construction is completed. “While planning ahead is helpful,” says Bilik, “there are many products available for running wires post-construction.” He recommends 110v wiring to fish through walls and attics or low voltage wiring when 110v is not an option.

For less penetrable surfaces like concrete and stone, surface mounted fixtures are ideal because they mount directly to a wall or flat surface. These step lights commonly have a profile of as little as 3/4-inch up to 3-inches and a trajectory that directs light at the wall or at the surface below.

Regardless of whether you are using a flush or surface mounted step light, you must consider the type of cover (or faceplate) the fixture has. Bilik says that in his experience, most covers will fall in one of three categories, each with its own series of benefits:

As we near the end of summer, we’re still contending with temperatures in the 90 degree region. As a result, we are using our air conditioners for the majority of the day, every day. This puts a lot of strain on your electricity, which is probably reflected on your summertime utility bills. The good news is, there are a number of ways in which you can save energy, and thus reduce your electric bills. We’ve cited a few examples below.

This is a task that should be done at least on a yearly basis—bi-annually if you have a heat pump. You’ll hear some companies tell you that you can or should only have AC maintenance done before the cooling season begins. The truth is however, that AC maintenance can be done at any time of the year (though it is true that HVAC technicians are busier and harder to schedule at peak temperatures).

Preventive maintenance allows our technicians to fully inspect and clean your AC system, and make recommendations for any repairs that might be needed. When your system is effectively cleaned and repaired, it performs more efficiently, and therefor doesn’t use up as much energy as it normally would.

The Department of Energy estimates that 75% of the electrical use by your electronics occurs when those electronics are actually not in use. While there may only be a small amount of electricity used by each component, it adds up. We recommend that you plug each of your electronics into a power strip, and then when they aren’t in use, turn the power strip off.

This is a maintenance task that you can do on your own, at least every 3 months while your system is in use. If you have significant contaminants in your home, such as pet dander or cigarette smoke, then you should up this to once a month. If your air filters are clean, then your air conditioner won’t have to work as hard or run as long to do its job, which means it won’t be using up as much energy as usual.

The answer to the question above is a bit tricky. First things first, not every homeowner is necessarily going to require air duct cleaning services. However, should your air ducts require cleaning, it is always necessary to schedule that service with a trained and properly equipped technician. After all, there is really no way in which on can hope to access and thoroughly clean their air ducts on their own. The hidden nature of ductwork can make assessing its interior condition rather difficult, though. That is why we have compiled a few tips for helping you to identify the need for air duct cleaning services in Boston, MA. Contact FB Electrical Services to schedule exceptional duct cleaning service today.