If you are a fairly handy person, then there may be a handful of small home electrical repairs that you want to take care of yourself. If you are not a skilled electrical professional, however, you should not put your life at risk. Always place your trust in an experienced electrician in Burbank. Although some tasks may seem safe enough to handle on your own, you should not even think about it unless you have been properly trained to do it. Regardless of how old your home is, you will encounter electrical problems every now and then. If you know what to look for, then you will know when it’s time to give The Electric Connection a call.

If your plug sockets feel hot to the touch, do not use them. Electrical shocks can be life threatening, and you do not want to expose yourself or your family to the possibility of them. If you find yourself experiencing this, call your electrician right away. Hot wires can overheat, leading to electrical fires that can be very hard to control.

If your breakers are tripping frequently or you blow fuses often, then you may want to have an electrician come take a look. Although it is normal for this to happen every now and then, it can signal a much more serious problem if it happens to frequently. If you have to pick and choose which appliances to run at any given time, then you need to have an electrician come and check things out.

As a rule, you should never hesitate in contacting a Burbank electrician whenever you suspect that you may have electrical issues that need attention. Although the cost may deter some, it will cost much less than if it is left unchecked. For more information about electrical issues, or to get in touch with us, visit our website at www.theelectricconnection.com.

Last night, thousands of walkers and hundreds of runners in Edinburgh kicked off the Courtesy of NVA.org.uk

A bunch of research went in to creating this light up gear to meet the NVA’s head designer James Johnson’s following standards:

For the runners, the design team wanted something dramatic, so they ended up going with concentrated point source LEDs, which looked great both close and at a distance. The LEDs allowed them to mix color and adjust intensity of the lights remotely. The runners themselves had to be in tip-top shape, able to run 10 miles at a 9-10 minute pace in all kinds of weather. Therefore, as to not hinder them in their physical feat, the design team fashioned a webbing suit out of the LEDs, complete with a radio and battery pack. Check them out:

The only shortcoming of these suits was that they couldn’t be powered by the runner’s motion. After attempting to harvest energy via knee braces, they determined any impediment to the runner’s motion dramatically affects his or her performance.

For the walkers, Johnson and his team wanted to build something subtler, to provide adequate safety lighting, but not to distract from the viewing experience. They decided to go with staffs/walking sticks illuminated by a combination of electroluminescent tape, fiber optic fabric, and diffused and non-diffused LEDs. Each staff housed a micro-computer that would synch up the flashing patterns with the Orchestra’s score, with changes triggered by movement and altitude. And here they are:

The research team was able to use motion to generate power in this instance, since walking is a more leisurely, steadier movement. To harness the power of movement, two LEDs, two high power Neodymium magnets, and a copper coil go in the top of the staff, then as the walker strides along, striking the stick against the ground, one of the magnets oscillates through the coil, creating a small electrical current. One LED lights up when the magnet travels down, and the other when the magnet travels up, producing a twinkly effect.

The runners also received a smaller version of this staff in the form of a baton.

Most kids are extremely curious and want to know how things work and will also take items apart if they are able to; it’s no different when they are around electrical fittings, fixtures and appliances. If you have toddlers in your home, it’s best to get electrical safety fittings installed where there are powerpoints and electrical outlets. However, if you have slightly older kids, it’s important that you teach your kids some basic electrical safety; here are some tips you can keep in view:

If you are concerned about your kids playing safely and without any accidents around electrical installations, fixtures and appliances either in the indoor and outdoor areas of your home or in the neighbouring areas, here are pointers you should go over with them:

All bathroom spaces have high levels of humidity and moisture and this is unavoidable. However, if the moisture is allowed to linger in the air for a very long time without being vented out of the space, it can result in mould and mildew growth on the grouting, the drywall structure as well as along the window ceilings and air conditioning ducts and can damage other aspects of your home’s structure as well.

In some cases, water damage may also occur which can become expensive to fix. That is why every bathroom in your home or commercial property should have an exhaust fan installation to suck out the moisture from the air and release it outside the structure. This may seem like an easy job and DIY enthusiasts sometimes feel, it’s a job they would be able to manage themselves.

But the fact is it’s never a good idea to play with electricity. Even something as seemingly simple as an exhaust fan installation can pose the risk of electrocution or death when handled incorrectly. The bathroom exhaust fan installation has to be handled with care, primarily due to the high moisture content interacting with the electricity that’s running through your exhaust fan.

Low Voltage Track and Rail Lighting Systems for 2013

Your Guide to Outstanding Low Voltage Lighting Installation 2013

You cannot beat the versatility and design of innovative low-voltage track and rail lighting systems.  New compositions and energy-efficient options are extraordinary and may be custom-designed to blend seamlessly with changes in your decorative environment.

Far from the industrial-sized straight runs and bulky fixture heads of the past, new track and rail lighting systems are elegant and balanced to beautifully illuminate both traditional and modern settings.

Top 5 Reasons to Update with Low Voltage Lighting Systems

1.  More Economical:  Because low voltage lighting systems function on 12 volts of electricity rather than the standard 120 volts, low voltage lighting uses less energy, and smaller low voltage track heads deliver light more efficiently.

2.  Easy installation: From colorful and vibrant glass pendants to sleek metallic spot light fixtures, track and rail systems are easy to install and maintain. The monorail system is the most basic and easiest to install; consisting of a single line of electrical cable that may be installed in straight runs or custom designed in a unique configuration.

3.  Safer Operation:  Low voltage lighting requires a transformer to “step down” the 120-volt standard to a 12-volt system; and, the reduced 12-volt system eliminates the risk of electrical shock.  Because of the reduced risk of electrical shock and safer operation, low voltage lighting may incur fewer required inspections.

4.  Greater Flexibility:  Unlike other ceiling fixtures where a lighting design in required before you begin construction, low voltage track and rail lighting systems provide the flexibility to update your home lighting design as you can afford. You may choose to do one segment at a time, and add to the design as your needs and budget allow.

5.  Superlative Lighting Designs: Low voltage track heads and light fixtures are available in a myriad of styles and sizes.  They are made to accommodate compact light sources that are as bright as 120-volt bulbs but in a smaller fixture. Most of the bulbs used in low voltage lighting are more than twice as bright as regular incandescent bulbs of the same wattage.

FAQ’s

HOW MUCH WILL IT COST?

-The cost to install low voltage lighting currently runs on average between $150-$220 per fixture.  Material and labor costs vary according to hourly labor wage restrictions, specific project size and the number of fixtures needed.  It is a good idea to get a few estimates before hiring an electrical contractor for your low-voltage lighting installation.  Estimated costs should include all materials, as well as delivery charges for equipment and costs to prepare, protect or repair existing structures. (Permit and inspection fees are usually additional charges that may be involved with certain lighting installations.)

-Low voltage track and rail lights operate on a system equipped with a transformer. Since standard lighting installations run on outlet and junction boxes that provide 120 volts of electricity (in the US and Canada), the transformer serves to “step-down” or decrease the voltage from standard line voltage (120 volts) to low voltage (12 volts).

-Low voltage fixtures, bulbs and dimmers are generally more expensive than line voltage systems due to the transformers that are included as part of the fixture’s electrical construction; Although low voltage installations may be more expensive than line voltage systems, lifetime operating costs are lower due to energy savings and lower maintenance costs.

WHAT TYPE OF LIGHT SOURCE WORKS BEST IN A LOW VOLTAGE TRACK HEAD?

-Although there are some good compact fluorescent lamps that may be used in low voltage track fixtures, halogen bulbs are still the most popular choice.

-Low voltage halogen lamps contain filaments that are shorter and fatter, so the illumination is precise, crisp and luxuriant.  These lamps are available in a variety of beam spreads offering over 20 variations in any given wattage, ranging from super narrow spot lights to full-spectrum flood lights.

-The most common lamps or light sources used in low voltage track heads are PAR 36 and MR 16 halogen light bulbs.

CAN I UPGRADE MY TRACK FIXTURES WITH LED (LIGHT EMITTING DIODE) LAMPS?

-LED (light emitting diode) low voltage lamps are compact solid-state light sources that provide cool focused task light.  LEDs last 10,000-100,000 hours and use very little electricity.  With future production, LED lamps may become more affordable and the standard go-to choice in track and rail systems.  *Rather than a transformer, LED bulbs require a “driver” to convert from standard to low-voltage.

 With a state-of-the art low voltage system, you may custom design formations with imagination and creativity and the possibilities are endless…

-Use straight runs of track to highlight displays in a gallery or down a corridor.

-Make a design statement and provide the perfect task light with hand-painted low voltage pendant lights over kitchen islands, bath vanities or night tables.

-Highlight the sparkle in crystal and provide accent light to an elegantly set table with low voltage rail lighting.

-Expand your space with hand-bendable rail fit to accommodate rooms with limited ceiling space or rooms where electrical junction boxes are  inconveniently located. The beauty of track is that it may be custom measured and easily cut to fit your exact specifications.

*Especially suitable for savvy renovation projects, such as older New York City apartments that may have one junction box in the ceiling:  Track and rail lighting configurations can do it all, providing general, task and accent lighting.

-Track lighting systems are even being used to power residential garage space with functional and inviting illumination; Showcase expensive automobiles and provide excellent task lighting to a workbench or hobby station with streamlined track lighting.

Low Voltage Track Systems from Start to Finish

GETTING ON BOARD: YOUR TRACK  7-STEP SYSTEM

-Although, electrically-speaking, track runs must work as separate units, multiple track and rail layouts may be connected to appear as one system.  An isolating connector is used to power each section.

-A floating canopy connector may be installed anywhere along the track and covers a junction box while providing power to the system.

-A live end connector may be used if you are running wires directly into the track without using a junction box.

-You may also power the system at any connecting point (straight, angled, T-junction, etc.) where the connector has a power feed entry point.

-A junction box may also be used at any of these power entry points; a canopy cover plate should cover the entry points for aesthetic, as well as safety reasons.

Basic guidelines to ensure safety and effortless performance of low voltage track heads:

-Most track and rail systems are installed directly into the ceiling and mounting hardware should be included.

-Systems that are suspended from the ceiling require adaptable suspension hardware.

-Low voltage track heads are made to slide directly onto the track and repositioned easily.  End caps should be included in the installation for a clean finish.

-Low voltage track fixtures may be placed on line voltage track systems by using a track connector with a transformer installed to lower the voltage of the track system.

-Voltage drop:  On longer track runs, you may notice a decrease in brightness the farther away the low-voltage head is located from the transformer.  With remote transformers, voltage drop is dependent on the number of fixtures on a system, the length of track, and the length and gauge of wire from the transformer to the power feed.

– Be sure to mix and match fixtures within the same systems; check for compatibility when trying to interchange fixtures from different track and rail systems.

-PAR bulbs and MR16 low-voltage halogen are available in a variety of beam spreads.  Wide-angle bulbs are great for general illumination; narrow spotlights are good for task and accent lighting.  Track head accessories and special lenses may be added for increased directional and colorful effects.

Track or rail systems allow you to create an original lighting design to perfectly illuminate your home. Capitol Lighting offers track and rail lighting systems, accessories and compatible light fixtures from top brands like LBL Lighting, WAC Lighting, Kichler Lighting, Tech Lighting and Wilmette Lighting.

Top Pics include:

TECH LIGHTING MONORAIL 

Low voltage track and rail systems that twirl, bend and twist are available in choice finishes.

‘

EUROFASE Cable Lighting

Energy-efficient 4-light Design Pro LED Rail Lights from Kichler accommodate installation on the wall or ceiling.  They are fully dimmable and Energy Star-rated.

Industrial-inspired head with proprietary 5.8 watt LED module. It is easily field upgradeable and replaceable similar to a medium-base socket, though it utilizes a dedicated base. The heat sink remains with the fixture minimizing any waste at the end of life. Rotates 360°, pivots 90°.

“Clamps to Wall MonoRail. 18″” long with 3″” high gentle curve. Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts not included). For Wall MonoRail system only.”

With the latest track and rail lighting innovations, the flexibility to redecorate with light is intrinsic. Adjust your lighting design with ease by adding new track segments or repositioning adjustable fixture heads.  Transform your guest room into a nursery with whimsical designer pendants or upgrade your hallway with sleek metallic low voltage track heads.

Low voltage track and rail lighting fixtures are brilliantly engineered to adapt to modifications in your décor and furniture placement; lighting may be reconfigured and beam spreads refocused to highlight artwork and illuminate your home safely and purposefully to bring out the best in a new design scheme.