The end of the month has arrived, along with that same old utility bill. The cost of electricity can be a huge dollar amount, especially in larger homes with larger families. The utility bill has become just a part of life. Driven by the energy consumption of fridges, washing machines, lighting, and so much more, the electricity consumption of your home is dependent upon many things that often cannot be helped. However, there are a few household items that take up a surprising amount of electricity that you may not have thought about! Changing the way that you and your family uses these 5 common items could actually make a difference in that monthly bill in your mailbox! Here’s a list of these sneaky electricity users and some suggestions on how to decrease their energy use.

Personal electronics are a part of our everyday routine, whether it is our smartphones or our laptops. There’s no avoiding charging your device, but between 100% battery life and the idle time it spends charging afterwards, it becomes a major energy consumer. Leaving your cellphone or your laptop plugged in after it has reached a full charge still pulls in a decent amount of electricity. This does no good for your electricity bill, and it actually is worse for your device as well. Leaving your electronics plugged in past the full charge does damage to its long-term battery life.

The Solution: Immediately disconnect your electronic device from its charger when it gets to 100%. Unplug the actual charger, then do it all again when it’s time to charge again. Don’t plug in your devices at night when you go to sleep—that’s 8+ hours of idle charging time that racks up the dollar signs on your electric bill.

Xboxes, PlayStations, Wiis…the number of consoles that are available grow every day, providing entertainment and family fun. However, whenever those devices are on and not being used, it sucks up a lot of electricity to keep it powered.

The Solution: If you’re going to step away, turn the console off. Never let it linger and go idle, as this can use unnecessary energy. Unplug these devices when you travel, as well.

Surprisingly, your DVR or cable box can use as much energy as your refrigerator: one of the largest energy consumers in your home. These devices are always in standby, waiting to be used, which means that they constantly pull in energy just in case you press the On button on your remote. So not only do they use energy when they are on as you are enjoying television, but they are also using energy when they are off.

The Solution: Like the consoles, turn off the TV when you step away. Then unplug the actual DVR or Set-Top boxes when you know you aren’t using them or are traveling for a period of time. This could save you quite a few dollars on your next bill.

Summer time in Colorado means lots of dry heat. Especially if you do not have an AC system, like most older homes and apartments have, then ceiling fans are your only source of cool air. However, when they are big electricity users, so if you can help it, switch them off.

The Solution: Don’t keep the fans on for long periods of time, like when you are out of the house, or at night time when you’re sleeping. You could also upgrade to a more energy efficient model of ceiling fans, which could save you some money as well.

Just like DVRs, microwaves use energy both when they are on, and when they are off. When you’re not using your microwave, it sucks in constant amounts of energy to keep the buttons lit and the clock on. Then the energy levels jump to an all-time high when they are in use.

The Solution: Unplug your microwave when you’re not using it. Keep electricity levels low by only using the microwave when necessary. You could do this by doing things like avoiding defrosting meat in the microwave—letting it sit on the countertop for a few hours instead.

Though they seem small, these 5 household items are mighty when it comes to electricity use, even when they are not being used. If you’re trying to cut down your electricity bill, or want to be more energy efficient, these small changes in the way that you use these everyday items could make a huge difference in the long run.

Generally, it doesn’t cost much to hire an electrician to have repair work or installation done at home. Yet, many homeowners in Oregon feel they can save the money they would have to spend by taking care of the problem on their own, even though they lack the experience and the expertise to do it right. This often leads to greater problems and they have to spend more money on the repair than they would have if they had called in an electrician in the first place. Of course, hiring the right electrician isn’t simply a matter of finding a number in a directory and making a call.

There are thousands of electricians you will find and not all of them are made equal. Not to mention, they don’t all offer the same services. But it is important to understand that even with electricians, there are different types. There are electricians that take care of the big stuff and then there are electricians that handle the small stuff. It is important to identify the kind of problem you are facing before you call an electrician.

What is low-voltage wiring and where can it be found? This covers everything from communications to entertainment systems, for example, televisions and telephones, small electrical devices much like doorbells and thermostats. A low-voltage electrician takes care of these things for you so the next time your TVdoesn’t work, call in a low-voltage electrician as he will be quick to assess what is wrong with it and will fix it much quicker as it is after all, in his job description. He will ensure that the wiring is properly installed and that the device does not malfunction again.

A low-voltage electrician will visit clients that are in need of installation or repair, will scope out the job as well as determine what tools are required and also how long it will take to fix whatever it is that needs fixing. For example, a thermostat which is malfunctioning may be the consequence of a frayed wire or it could it that it happened because of a poor wiring job which needs to be redone.A low-voltage electrician will know just how to do it.

Once thelow-voltage electrician has diagnosed the root cause of the problem, he will correct it. Should you need new installation, he will recommend one that will fit your needs as well as your budget. Once that is done, the process of fixing the problem will start.

Think of them as doctors of electronics making house calls in order to check faulty wiring. It doesn’t matter if it is a doorbell that is no longer working or a cable connection that flakes out on you when you are binge watching the last season of Breaking Bad, a low-voltage electrician will come and fix the problemfor you.

It is as difficult to find a low-voltage electrician as it is to find a high-voltage one. But luckily for you, low-voltage electricians are licensed as well. So, find a contact from your most updated yellow pages and once you have a chance to meet the electrician, ask them to see a license. And there you have it.That is how you find the right AND legally authorized low-voltage electrician for any low-voltage work you need done at home.

To conclude, it is important to acknowledge what low-voltage electricians do and how helpless youwould be without one. No one can imagine their lives without the little technological advances in their everyday lives.

Acquiring Pennington generators falls under preparedness for emergencies. With such equipment available, there is no need to worry about unexpected power outage for there is a ready alternative source of energy to run several appliances, depending on the power capacity. In purchasing such apparatus, several aspects should be considered. It offers an array of advantages and disadvantages, thus these should be weighed before considering the purchase of equipment that will best fits a household’s needs.

Also referred to as the emergency power source, it is generally known to produce clean energy, converting fuel into electricity in the process. Most use gasoline, because this is one of the cheapest fuel alternatives. However, some run with diesel or propane. Fuel is readily available almost everywhere, but some prefer storing fuels at home so that when the need arises, it can be easily loaded to the generators. Note however that fuel, especially those that are fossil based have short shelf life. Storing would entail the purchase of anti-coagulants to lengthen the storage life of fuel. Therefore it is not also advisable to keep the fuel inside the generator set for it may pose a certain degree of risk to the system, which may lead to permanent damage.

The engine of the equipment requires regular test runs. It is not recommended to allow it to stand idle for a long time. Allowing it to stand idle would lead to malfunction. Once every month, even in the absence of a power outage, Pennington generators should be run and allow to run so as to optimize its operation. This is to prevent the scenario of having a dysfunctional system when real power emergency occurs.

In running the engine, an average noise level of 60-70 decibels is produced for portable type and even higher for heavy duty types. Portable Pennington generators actually exceed the noise level produced by normal conversation by a few decibels, thus it is more advisable to choose this instead. In general, noise is a distraction that can hinder the normal flow of activities in the household. But it should be noted that power outage does not happen often and the noise is just a little sacrifice compared to the benefits that we reap from a reliable alternative energy source in times of emergency.

The dimensions of the entire package should likewise be considered. Compact versions, considered to be space savers, are more favorable because it is easier to keep and store compared to the bulky heavy duty type. However, if the heavy duty type is preferred, especially for larger Pennington households with larger electricity demand, transportability and mobility can be assured if the generator has built in wheels.

Lastly, it should be made sure that the product purchased complies with the safety and environmental standards. This way, it can be assured that only clean energy is generated and no harmful fumes that can adversely affect the health of family members are emitted.

In choosing Pennington generators, make sure that it is worth the investment by studying carefully all the aspects of the equipment.

Part of my job as an electrician is not only to help fix an electrical system when something goes wrong, but also to help my customers make sure that the fixtures are correctly installed. Installation is the most important phase for an electrical fixture or appliance; following the proper procedures can help ensure the maximum life for the electrical device, minimize its upkeep, and save you from costly repairs.

One of the most popular fixtures I am called to install are chandeliers, and with good reason.  As beautiful and elegant as they can be, home chandelier installation can be extremely tricky, even for those with experience.  If you have recently purchased a chandelier, I strongly encourage you to call a skilled Richardson electrician to have it installed; a talented electrician knows how to best hang, wire, and secure your chandelier to the ceiling. With that in mind, here are some important electrical safety tips to ensure you get the most out of your new light fixture:

So, you want to become an electrical contractor/engineer? Selecting electrical work as a profession brings several rewarding growth opportunities. After all, the need for electricity is on the rise in today’s society. But before you reach a decision, it’s not only important for you to know the numerous duties of an electrical contractor/engineer, but also the requirements for becoming a certified electrician.

Luckily, in this article, you will learn everything about becoming a certified electrical contractor in a step-by-step process. It doesn’t matter if you are looking to start a career in electrical contracting, or are still only considering it, the information provided below will prove useful. Here’s what you need to know:

An electrical contractor or engineer designs, develops, tests and installs electrical hardware, systems and equipment. They work in a variety of settings, including commercial and residential structures. To become an electrical contractor, you have to receive extensive training and obtain a license according to the local regulatory guidelines and standards which apply to your country.

Steps to Become a Certified Electrical Contractor

Several schools and colleges offer instructional programs for prospective electrical contractors. Moreover, a bachelor’s degree in electrical engineering offers comprehensive training in electrical design and systems. Academic programs generally include hands-on coursework and internships to help you gain practical experience.

Novice electricians can also gain supervised training under an experienced master electrician through apprenticeships. National organizations, state agencies and unions can introduce you to contractors and companies offering apprenticeship programs. These typically require a high school diploma. If you qualify, you will be offered paid positions that will last at least five years.

As mentioned earlier, electrical contractors perform a range of services for commercial and residential properties. In addition to installing and maintaining electrical systems, hardware and equipment, electrical contractors also train and hire new electricians, do administrative work, as well as plan and schedule projects with clients. They can be an integral part of the team involved in the building process, ensuring the electrical systems are up and running before the final work is completed.

Therefore, mentored training and experience in various electrical positions will provide you the industry-related and foundational knowledge and skills required to become an electrical contractor. Additionally, working under a master electrician can give you the experience and skills required for a journeyman or novice electrician to obtain a license, get certified, and perform independent work.

Some countries require electrical contractors to acquire an electrical contractor or master electrician license, while others don’t. If it’s mandatory in your state or country, you can obtain your license from the relevant state boards. However, keep in mind the requirements to get licensed will vary from state to state.

But generally, the requirements include meeting the experience requirements by working under an experienced master electrician, paying a certain amount as fee, as well as passing a written examination. Also, your license has to be renewed every few years, where you will have to pay the fee as well. You should contact the licensing agency in your state for a clearer picture about the requirements.

Once you have acquired your license, you are a certified electrical contractor and start working independently, or by joining a contracting company. But you should also understand that being an electrical contractor requires ongoing education to stay up to date with the technical advancements in the electrical domain, as well as any changes to the standard electrical code.

Electrical contractors with enough experience under their belt can also consider starting an electrical contracting business of their own. By starting your own business, you can increase your earnings from your work. Not to mention, you will have increased scheduling flexibility, which means you can employ other electricians to work under you and dispatch them to work on projects offered by clients.

And with that, we come to the end! As you can see, this article covers all you need to know to become a certified electrical contractor. Hopefully, now, you will have a better understanding about the requirements and duties the job entails.