Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

By: Jason Lee

It’s that time of year again. Everyone is making resolutions, turning over a new leaf, and looking to make this year better than the last. Make this year great by making sure the leaf you’re turning over is green and consider solar power and the benefits it could bring to your home and/or business. 

Solar power is a popular form of renewable energy that helps keep the planet clean. Oil, gas, and coal will produce energy, but require manpower to refine it into a usable form. With solar power, as long the sun is around, you have power. Solar power can be used for many things around the home or office, including generating heat and electricity and it’s great for indoor and outdoor lighting. In fact, the installation of solar powered outdoor pathway lights is one of the easiest ways to use solar energy in your home or business. One of the best uses of solar power is heating water. Homes that have hot tubs or swimming pools should consider looking into heating them with the help of solar power. Due to low operating costs of the solar power, it is very cost effective.

Benefits to solar power include the slowing of global warming, saving homeowners money, energy reliability, and energy security. According to the U.S. Department of Housing and Urban Development, home values rise an average of $20 for every one dollar of reduction in the annual utility bill. Another great thing about going green this year is that it will continue for years to come. By switching to solar power, homeowners may be eligible for tax credits, rebates or other incentives, and you will be reducing the amount of environmental impact you have on the planet.

So start the new-year off right by looking to make this year and the years to come a brighter and cleaner place not just by turning over a new leaf, but by making sure that leaf you turn over is green.

Source:

Source:

Source:

Using interweaving print technology, each image is printed on an LED panel light lens using eight rows of 180 ink nozzles that prevent any horizontal banding or visual imperfections. While the lens is being printed, a UV light cures and dries the image as it exits the printer. Printing time varies per lens size; a 2-foot-by-4-foot lens typically requires 15-17 minutes from start to finish.

A problem so many people deal with and assume there is no real solution to is bathroom lighting needs in the dead of night. Turning on the light to take care of business can be too much. It is too bright and ends up blinding you before waking you completely up and making it next to impossible for you to fall back to sleep. You may feel like you are forced to choose between complete darkness or too much light, but an electrician in Burbank has another option. The reliable team at The Electric Connection wants to help you take care of your bathroom lighting woes.

Under the Cabinet Lighting

You can add some light to the bathroom without making it completely by blinding by placing it low to the ground. A rope light placed under the lip of the bathroom counter near the floor adds just the right amount of light in an area where you really need it. This is a quick and easy job for an electrician. Burbank homeowners will appreciate the effect the soft lighting gives the room as well as its usefulness.

Outlet Nightlights

These are very handy and shed just the right amount of light over the sink area. The lights are attached inside the outlet cover and do not require the services of a Burbank electrician. The lights work on a sensor and will automatically turn on when it is dark.

Lighted Toilet Seats

These may not be quite as practical, but they are certainly very neat looking. It isn’t the actual seat that lights up, but the hinge of the toilet seat. The soft glow of light illuminates the bowl and gives a person a little direction.

If you would like an electrician to take care of these small bathroom lighting jobs, give The Electric Connection a call today and schedule your appointment.