The Importance of Residential Circuit Breakers Circuit breakers have an important job in the day to day functioning of your home’s electrical system. These breakers are attached or connected to an electrical circuit. They are designed to prevent any further power flow continuing through the circuit in case there is an arc, short or a power surge. Circuit breakers can fail or go bad, and in such cases, they require immediate attention. Because if a circuit breaker is no longer functioning, it cannot provide your appliances and electrical system the protection they need.

Where are Circuit Breakers? Circuit breakers are located in the circuit breaker box. Some homes have a single main breaker box while other homes may have one main breaker box plus several small breaker boxes. It is important to know where your home’s circuit breakers are located so you can check them in the event of an emergency, or if a breaker gets tripped and needs to be reset.

Finding a Bad Breaker If a circuit breaker gets tripped, you need to reset it. A tripped breaker appears to be halfway between the on and off position. A circuit breaker may not need to be replaced, it may just need to be reset. Turn off all the lights and electrical appliances operating on that particular circuit. Flip the breaker back to the “on” position.

Some circuit breakers have to be turned completely off before they are turned back on. Test the circuit breaker after it has been reset by turning the breaker back on and then adding all of the devices or appliances back one at a time. If every item operates again, a voltage tester is not necessary.

For large projects, a simple notepad and pen are not sufficient to provide accurate and timely cost estimates to clients. The good news is that there are some pretty good estimating software programs now available that do the job. Both residential and commercial contractors can save time, money, and win more bids by providing professional job estimates. These programs also offer the ability to manage projects, bill clients, and keep track of change orders. They feature a wide range of options for any size of contractor.

TurboBid is one of the most well received and fully featured estimating programs on the market. It contains a user-friendly graphical interface and offers training courses through their website. The software can connect to national and local material supplier databases to keep pricing updated throughout the bidding process.

Change orders and revisions are simple. The software will generate automatic reports and professional presentations for clients. It also allows fine adjustment of man-hour estimations in different locations of the building. This includes ceilings. The program can account for different worker skill levels and upcoming wage increases for longer projects.

The built-in database includes tens of thousands of parts and full assemblies to allow for quick and easy estimation. The program incorporates national and local electrical code requirements to ensure bids are code compliant. In addition, it has a value engineering feature that suggests code-compliant changes to the customer’s blueprints. This can ultimately save money by adding, removing, or relocating devices.

Cleaning a crystal chandelier isn’t as daunting as it may appear. These precious fixtures require a little more love and care than a desk lamp, but you can restore and maintain your crystal’s shine with common household products and a little know-how.

Everyday Care

If your chandelier is still sparkling clean, simply dust the fixture with a lambswool or feather duster every few weeks. Keep your strokes light, since leaded crystal is softer than glass—even dust can scratch it. Be sure to walk around the fixture as you dust, rather than spinning it towards you. Twisting the fixture can strain the wiring or loosen its support.

Spring Cleaning

Eventually, the fixture will need a more thorough cleaning, especially if it’s in a high-traffic area or kitchen. Mid-size chandeliers are still manageable at this stage, provided you have some clean, lint-free rags, isopropyl alcohol, and a little elbow grease.

Before touching the chandelier, follow rule number one: turn off the power to the room when dealing with a ceiling fixture. At least flip the light switch off and tape it so no one will accidentally turn the light on while you’re working. Set up an alternative light source to aid the cleaning. Once the chandelier bulbs have cooled, cover them with plastic snack bags and secure with a rubber band.

Fill a spray bottle with one part isopropyl alcohol and three parts distilled water. Spray on one section of the chandelier at a time, then wipe off with a white cotton glove or lint-free cloth, making sure you dry the frame as well as the crystal. This solution will clarify the crystal and help remove the haze, but is gentler than ammonia on crystal with a design or edge finish. Even so, gently wipe away after spraying and don’t allow the fixture to drip dry. This will help preserve the frame.

Try cleaning your chandelier every two to six months with the alcohol solution, depending on whether the fixture is in a high-traffic area or not.

Heavy Restoration

If your fixture hasn’t been cleaned in a long time (or just needs extra attention), you can go an extra step before calling a professional. This is where a digital camera comes in handy, as you’ll need to remove individual pendants for a more thorough washing. Take pictures of the connections for reference later, then carefully remove the pendants. You may need a pair of needle-nose pliers to help disengage the pendants from the fixture.

Fill a sink with warm water and some gentle dish soap. Carefully wash each crystal piece and rinse in warm water to avoid any drastic temperature shifts. Set the pendants on a clean cloth to dry. Then simply rehang the pendants and enjoy your sparkling fixture!

 Illuminate anything from skateboards to yard games, and transform them into unique, eye-catching displays that you can use anywhere. single colors or

Perfect for tailgating or late-night stargazing—portable LED light strips make the perfect truck bed lights. They’re easy to install and are a great way to add colorful illumination without having to do any vehicle wiring. Adhere the strips to your truck bed with their adhesive backings, and mount the battery pack in a covered location so that it’s not exposed to water.

Let your little one ride in style with LED strip lights on their wagon, stroller, or ride-on Power Wheels vehicle. These portable LED lights are super simple to install and can be set to one of many exciting single-color or color-changing modes. They will not only capture the attention of your baby, but they’ll also provide increased safety and visibility for evening walks or events.

From movie, theater, or extravagant Halloween props to models and costume figures—portable LED strips lights will take your project to the next level. They’re available in several shades of white as well as pink, UV, blue, green, yellow, amber, red, or color-changing RGB to match any theme or design.

Decorate your skateboard or scooter with LED strip lights, and differentiate yourself from the crowd. The portable LED lights are easy to apply, and you can use the wireless RF remote to control single-color or color-changing modes while you ride.

Brighten up your next tailgate party or camping trip! Install portable LED strip lights on canopy tents, sun shelters, instant canopies, pop-up shelters, or E-Z UP Instant Shelters. A variety of colors are available—including “Bugs-Away” yellow—and the strip lights provide up to 402 lumens of illumination.

With portable LED strip lights, you can create a lighted wreath, garland, or other holiday decor that’s unlike anything storebought. Colors are available for every holiday, and the attention-grabbing strip lights have several modes from flash to strobe to fade and more.