Spring is here and summer isn’t far behind. For Boston, MA residents, that means stifling heat and humidity, which requires a reliable air conditioning system to successfully fight. If you have an older or outdated system, now is the perfect time to have it replaced, before the mercury creeps up too high. Before you pull the trigger, however, you need to make sure you’ve picked the right air conditioner for your needs. Here are 3 things to look for when replacing your air conditioning system.

Sizing in this case refers to the power output of the air conditioner. It needs to be sized properly for your home: too powerful and it will cycle on and off rapidly, increasing strain and using unnecessary amounts of energy. Not powerful enough and it won’t do the job effectively. A good technician can make the proper measurements and select a system that is perfectly sized for your needs.

Air conditioners measure their efficiency with a SEER rating, which stands for Seasonal Energy Efficiency Ratio. The higher the rating, the less energy the system wastes, and the lower your monthly bills will be. Look for a system with the highest SEER rating you can afford to maximize your system’s potentials.

Air conditioners are fairly straightforward, but there are a few bells and whistles you might want to consider. For instance, some models come equipped with UV lights and similar filters to improve the quality of your air, while others have multi-speed fans to let you better control the air flow. Any of all of these may help improve the quality of life in your home.

If you want to replace an outdated AC system with a new one, the professionals at FB Electrical Services, Inc. are standing by to help. Give us a call today!

Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

Deciding whether or not to install solar panels is a big decision for anyone who owns a home or commercial building. The good news is that solar power is becoming more common, meaning that there are more installers and other companies that work with solar power. Because of this, you have more options when it comes to purchasing or financing your solar panels. Kim Hopkins, the owner of Solar Panel Info has set up this website to share his extensive knowledge of acquiring and installing solar panels. One of the most interesting things that discussed is the relatively new opportunity of the solar lease. Options such as this make the cost of solar panels attractive to many more buyers than ever before.

How Much Do Solar Panels Cost?

One of the greatest barriers to solar installation has always been the huge up-front investment that can be required. In recent years, however, there are many companies that offer alternatives to this, such as the solar lease. Programs such as this allow you to actually lease the panels for a monthly fee. This fee is typically based on the size of the system installed, your credit and other factors. The company leasing the panels will send their own solar installers to install the system on your home or business, and maintain ownership of the system. All of the electricity that you generate, however, is your own. In most cases, according to www.solar-panel-info.com, your new (lower) electric bill, plus the solar leasing costs will be less than your electric bill before your panels were installed. This means that you can start saving money during the first month of ownership.

If you wish to do so, you can also purchase solar panels outright. This can be done through the same companies that lease, or through other solar panel installers in your area. One of the benefits of purchasing your own solar panels is that you can take advantage of many tax benefits, rebate programs and other incentives. While this option may not work for everyone, you still have the ability to finance the purchase of the equipment, as well as the cost of installation.

Will Solar Panels Save Me Money?

According to the experts at www.solar-panel-info.com, most homes and businesses will start saving money during their first month of solar power generation. This is especially true if you choose to take advantage of a solar lease. In addition to lessening your dependence on electricity from your utility company, many utilities also give you the option to sell your electricity back to them. This can be incredibly beneficial on days that you can generate much more than you use. In most areas, especially during the summer, you will be generating the most electricity during peak hours, and drawing electricity during off-peak hours. Because of this, you will use lower-cost off-peak power from your utility and sell them back higher-cost peak electricity. This is perfect for offsetting cloudy, stormy days that will generate little to no electricity.

If you are looking for a great way to lower your energy bills, while also helping the environment, solar panel installation may be perfect for you. Now is an ideal time to start looking into this type of technology. There are many different incentives, rebates and leasing options that make getting started easier than ever before. If investing in the purchase of your own solar panels has been holding you back, take some time to look into companies that offer solar leasing. Experts in this field, such as Kim Hopkins, can give you some valuable insight and information into the options that you have in your area. If you have any additional questions, you can visit for more great information on solar installation.

Click here to read more.