Have you been calling for help from an electrician in Los Angeles more often than you’d care to admit? If you have old wiring, whenever you’ve had an electrical service call the electrician should have made you aware of the wiring situation. A knowledgeable Los Angeles electrician will tell you when your electrical wiring needs to be replaced.

Cloth insulated wires may not be grounded properly and are definitely unsafe by today’s standards. The cloth actually falls off, leaving exposed wires in vulnerable areas of your home. If a home’s wiring is aluminum, the wiring shrinks and expands at contact points, causing a potential fire hazard. Neither method is safe. If you think your home may contain either of these types of wiring, The Electric Connection specializes in wiring upgrades for older homes.

The knob and tube wiring that electricians in Los Angeles used before the 1940s employs the use of ceramic knobs and tubing, with wires running through the tubes. It is not a grounded system, so plugging in any modern appliances or electronics is an immediate fire hazard. There are a number of insurance companies that will not offer fire insurance to homes with this type of system. An electrician in Los Angeles from The Electric Connection can upgrade knob and tube for you also.

Homeowners hear the words “electrical upgrade” and immediately start to see dollar signs. With the Electric Connection, the prices are affordable and the work that is recommended is an investment, not an expense. Older wiring systems are not only unsafe; they’re raising the cost of your electricity. More modern systems were developed with efficiency in mind. When a home is upgraded from knob and tube wiring or aluminum wiring, the electric bill immediately goes down, as does the insurance bill and the home repair budget – no more calling a Los Angeles electrician once a month for blown fuses or shorts.

The Electric Connection is the electrician Los Angeles CA homeowners contact most often for electrical upgrades. With over thirty years experience and twenty-five full time employees, all residential and commercial electrical services needs are handled quickly, efficiently, and affordably. Whether it’s a rewiring, an installation, or new construction, the professionals at the Electric Connection can handle it in a timely fashion. If you’re an LA homeowner, your family and your wallet will be happy that you did.

Click here to read more.

There’s a lot more to the cost of a light bulb than the price tag sticker. There’s the impact on your electrical bill, the tally of replacement bulbs you’ll need to buy, and the time you have to factor in for maintenance. Sure, the light bulb in your table lamp may take just a few minutes to replace, but what about your recessed cans that are two stories away from easy access?

We published an infographic on Lighting Facts, a program of the U.S. Department of Energy, created the one below, showing the five-year-cost of 100 watt equivalent light bulbs. As you can see, the low purchase cost of an incandescent light bulb doesn’t necessarily pay off in the end:

As there are performance standard. All lights that are DLC Qualified have been tested and meet or exceed these requirements. Most recently, DLC has created a higher performance standard, DLC Premium. With DLC Premium, the LED lights are among the most efficient available. For example, our LED Retrofit Kits are DLC Premium Listed, while many of our competitors’ products are only DLC Standard Qualified.

To you, the consumer, this means a DLC Premium retrofit solution will be 20-30% brighter and / or use 20-30% + less energy. Comparing our units at 165 lumens/watt versus a competitive product at 97 lumens per watt, their product requires 135 watts to produce the same amount of light our product needs barely over 75 watts to create. To you, this saves you thousands of dollars month after month. So while both carry the DLC qualification symbol, ours will save you much more every minute the light is turned on.

One of the benefits of retrofitting is you get to recapture the investment in your existing fixtures. Think of a car dealership. Many are beautiful architecturally designed fixtures and the dealership had spent a lot of money to have them installed. The owners would like to convert to LED, but installing a new fixture is not an ideal solution. First, the finished result would not look as aesthetically pleasing as the current appearance. Second, the investment in the existing fixtures would be ‘throw away’. With a LED retrofitting kit, think of the driver as the ballast replacement and the head as a replacement for the metal halide bulb.

Secondly, most of the times a retrofit kit solution is less expensive than a new fixture solution. So not only are you able to recapture your fixture investment, but converting to LED should be cheaper than replacing the fixture with a new LED fixture.

Being DLC Premium Qualified, each kit must be backed with a 5 year warranty. Since our heads are so designed so thermally efficient, the heads have been upgraded to a 10 year warranty. The drivers come with a standard 5 year warranty, but an optional 10 year warranty on the entire unit is available. This means that you should not have to worry about replacing metal halide bulbs and ballasts for 10+ years. For some of our customers, not replacing bulbs and ballasts is almost as if not more important than energy savings provided by converting over to LED.

Our most powerful kit produces close to 51000 lumens while only consuming 350 watts. We believe we have some of the most, if not the most, efficient retrofit kits on the market today. While others are capable of creating 51000 lumens, they need significantly more watts to be able to do so. This is important, because one of the reasons you are probably considering on converting to LED is to save money. But it would be wrong for you to think that all LED solutions are the same in terms of efficiency. Some of our competitor’s kits are rated at 97 and 110 lumens per watt. Our fifth generation of LED retrofit kits are rated up to 165 lumens per watt. This means our competitors are 50% less efficient than our latest models. Over the life of the LEDs, this means you electrical bills are going to be significantly higher than it needs to be. Yes, it will be lower than the current metal halide or high pressure sodium bulbs you may currently be using, but they will cost you significantly more to operate over our latest ultra-efficient retrofit solutions.

The most important thing to do is to match the correct retrofit kit with your existing lighting. We created 11 retrofit kits as part of our family of LED solutions, from 30 watts all the way to 350 watts. Each unit is designed to fit into your existing fixture without the need for taking down the fixture and sending it to use so we can create a custom plate. Some suppliers provide that as their solution. With our 11 retrofit kits, there is no need to take down a fixture and send it to our offices so that we can design you a retrofit plate. Retrofitting Content by MyLEDLightingGuide