If you’re thinking of installing solar panels for your home, you’re probably doing a lot of research to see what the costs and your options are. There is a lot to get up to speed on, so let’s start with what solar panels cost.

Solar panels have been steadily dropping in price, due to more efficient manufacturing and increased popularity. Currently, they are at an all time low, and the cost of a solar panel is around $5 per watt of output. A quick look at your monthly electric bill should help you figure out what you need, in terms of power.

That’s just part of the equation though. The main reason for installing solar panels is to save money on electricity. Depending on where you live, you may be able to make some money by selling excess electricity back to the grid. Rates vary for this, so be sure to investigate the options fully.

Buying solar panels appears to be a big investment, but most people find that they are able to pay them off in under ten years, and sometimes faster. There is a complex mix of factors that determines that timeline, including your power consumption.

There are federal tax credits available for people purchasing solar panels, and usually work out to the tune of 30 percent of the purchase price of the system, including converters and batteries. That’s a significant incentive. Between the tax credit, selling energy, and the long-term promise of energy independence, there has never been a better time to get solar panels.

Of course, it’s all a little overwhelming. What you need is someone who is familiar with the territory to walk you through all the steps. The Electric Connection has the experience and the connections to get you started on the path to energy independence. Give us a call today to get the process started.

Prefabs provide on-site, off-site and other hidden advantages. For instance, faster installation at the job site reduces the project duration. Prefabs have the potential of cutting the installation time by almost a half. In addition, the project will require fewer workers in the field resulting in a big reduction in labor costs and improved profitability.

There’s also a significant savings on labor, which can be very expensive and in short supply. The prefabrication process is considered more of a manufacturing function so the contractor is able to achieve success with fewer workers. The workshop can make use of semi-skilled workers and apprentices, unlike a construction site where an electrician is required to perform the installation.

Fewer materials and less activity at a job site mean that the project is completed faster with a reduced opportunity for accidents and delays. In addition, by delivering all the individual components to the workshop for assembly, the level of material handling is narrowed. This equates to an easy-to-manage supply chain. Fewer materials reduce clutter, waste disposal, and the need for extra storage space.

The workshop provides the best environment for producing the assembly fast without the interruptions that might be found at a construction job site. Further, the production of prefabs is not affected as much by delays from other trades, bad weather, and other construction project hold-ups.

Electricians spend less time working at dangerous heights and precarious positions, hence reducing safety risks. Prefabs allow contractors to reduce the need for as many licensed electricians on the job site. This can result in greater productivity and profitability.

Increased competition and high labor costs have caused declining profits for many electrical contractors. However, with the use of prefabs, profitability can be improved by reducing the labor and time spent at the construction site. Additionally, fabricating electrical assemblies in a workshop makes it easier to stay on budget and hit your project timelines.

Sometimes, it seems easier and faster to try and fix what you assume to be a small electrical problem yourself. Maybe you have a light that is flickering or an outlet that sporadically works. You may think that a few loose wires directly behind the outlet or light socket are causing the problem. What if you are wrong? What if the problem is much bigger and by trying to fix what you assume to be a few loose wires, you end up hurting yourself and making the problem worse? It is always best to leave these situations to a Santa Monica electrician. You can rely on The Electric Connection to provide you with prompt and experienced electricians who can take care of even the smallest problems the right way.

While a loose wire behind an outlet or a light fixture can cause some things like flickering lights or intermittently working outlets, the problem may extend to the wiring hidden in the walls. It may even be the breaker that is causing the problem. You wouldn’t be able to tell by simply looking. You will need the expertise of an electrician. Santa Monica homeowners obviously want to make sure their home is safe and not at risk of an electrical fire.

When you hire an electrician to check out what you perceive to be a tiny problem, you are getting peace of mind that any larger problems will also be identified and addressed. It is crucial that a problem be taken care of the right way. If you fix those loose wires you thought were the problem, you could end up exacerbating the situation and cause an electric fire or even electrocute yourself in the process. The process of finding the problem can be a little time consuming, but it is always better to be sure and safe than to guess and put your home at risk.

The strike doesn’t even have to be a direct hit on your home but can occur within half a mile.  As a matter of fact, the majority of surges that most people take are from problems at someone else’s home or somewhere further down on the power company lines.  A surge doesn’t have to be lightning; it can come from an automobile accident that hits a power pole or even from a routine maintenance on the main power lines when they turn the power back on.  This off and on of the power with the main electrical lines can send surges into your home or business that I have seen destroy lots of electronic equipment and appliances.

Almost every home has multiple computers, and expensive home entertainment systems.  Even our appliances are high-tech with monitors built into the doors of refrigerators and laundry appliances with electronic controls.  These items are especially vulnerable to spikes in your home’s electrical current that may cause melted circuit boards and overheated wires.  Repairs to these expensive gadgets are much more costly than replacing a blown out light bulb or electrical outlet.

LED light bulbs and fixtures are the best alternatives for many reasons.

LED lights are available in several shades of white. These shades are referred to as a bulb’s correlated color temperature (National Institute of General Medical Sciences, states that, “Circadian rhythms are physical, mental and behavioral changes that follow a roughly 24-hour cycle, responding primarily to light and darkness in an organism’s environment.”

According to writes, “Several studies have documented the importance of light in reducing depression, decreasing fatigue, improving alertness, modulating circadian rhythms, and treating conditions such as hyperbilirubinemia among infants. Further, the presence of windows in the workplace and access to daylight have been linked with increased satisfaction with the work environment.” Windows are the best method of accessing daylight, but cool white LED lights along with the right color temperatures at the right times, can have the same effect on the body.

Warmer color temperatures lead to the release of melatonin, which causes drowsiness. This is appropriate during bedtime hours, but causes problems for those who need to stay awake, such as overnight nurses and doctors. Introducing natural or cool white light to hallways, operating rooms, and nurse stations can help hospital staff, especially overnight workers, feel more alert and energetic.

EPA has a list of cleanup procedures, such as having everyone leave the room, opening a doors or windows, shutting off heat and air-conditioning systems, and other specific instructions.

Fluorescent and incandescent bulbs also emit low doses of UV radiation that can damage not only facility materials but can also damage skin and eyes. According to a CBSLA.com discusses the results of another study that had similar findings. In this article, it is said that, “. . . exposure to the (fluorescent) bulbs could lead to premature aging and cancer.”

Continued UV exposure is also harmful to the eyes. A LED lights won’t flicker or emit any color spikes. Color fluctuations and flicker can cause negative effects, such as headaches and dizziness. When used for hospital lighting, LED bulbs and fixtures can improve overall health and eliminate the possibility of additional health risks posed by fluorescent and incandescent bulbs.

Seeing colors as they truly are is critical in health care environments. Inaccurate color rendering of skin or blood could lead to a misdiagnosis or failure to see signs of infection or jaundice. The spectral graph below can be helpful in understanding the advantage of high-CRI light sources. Lights with a low CRI will show fewer colors while high-CRI lights cover more of the spectrum. A light source’s ability to show more colors increases its accuracy in revealing the true colors of people, objects, and surroundings.

FreemanWhite, a health-care-focused design firm reports, “. . .light fixtures with a high CRI . . .  help caregivers assess rashes, lesions, and skin pigmentation.” They go on to say, “In the interest of avoiding liability claims, better lighting quality can enhance a caregiver’s ability to diagnose correctly, identify reactions, prevent secondary infections, and minimize readmissions.” High-CRI LED lights can also help prevent medication errors.

Another method of LED hospital lighting control is the use of occupancy sensors. These sensors will save money beyond those that result from reduced energy consumption. Sensors will also extend the life span of bulbs and fixtures even further by turning them off when no one is in the area. These sensors are best suited for low-traffic areas.