Spring is here and summer isn’t far behind. For Boston, MA residents, that means stifling heat and humidity, which requires a reliable air conditioning system to successfully fight. If you have an older or outdated system, now is the perfect time to have it replaced, before the mercury creeps up too high. Before you pull the trigger, however, you need to make sure you’ve picked the right air conditioner for your needs. Here are 3 things to look for when replacing your air conditioning system.

Sizing in this case refers to the power output of the air conditioner. It needs to be sized properly for your home: too powerful and it will cycle on and off rapidly, increasing strain and using unnecessary amounts of energy. Not powerful enough and it won’t do the job effectively. A good technician can make the proper measurements and select a system that is perfectly sized for your needs.

Air conditioners measure their efficiency with a SEER rating, which stands for Seasonal Energy Efficiency Ratio. The higher the rating, the less energy the system wastes, and the lower your monthly bills will be. Look for a system with the highest SEER rating you can afford to maximize your system’s potentials.

Air conditioners are fairly straightforward, but there are a few bells and whistles you might want to consider. For instance, some models come equipped with UV lights and similar filters to improve the quality of your air, while others have multi-speed fans to let you better control the air flow. Any of all of these may help improve the quality of life in your home.

If you want to replace an outdated AC system with a new one, the professionals at FB Electrical Services, Inc. are standing by to help. Give us a call today!

Working with your home’s electrical systems is always a risky do-it-yourself decision because of the immense safety concerns. Plus, not only could you cause harm to yourself or your family members, you could also be negatively affecting or even voiding your homeowner’s insurance policy which could have tremendous financial consequences. Even seemingly small projects such as ceiling fans are always better off when left to professionals. If you are looking for assistance with electrical installation, your best bet is to contact a residential electrician.

While ceiling fans are one of the most popular purchases at home improvement stores throughout the country, many people are not ready for how involved the entire process of installing a ceiling fan truly is. A hole must be cut into the ceiling, wiring must be properly run to the fan and your home’s electrical panel, and switches need to be installed or upgraded to control the fan. Additionally, all of this needs to be done up to code in order to ensure your family’s safety.

Installing a ceiling fan in your Iowa home may seem like an easy project. Between the prominence of home improvement shows and YouTube channels dedicated to doing it yourself, you may feel confident enough to try it yourself. However, installing a ceiling fan involves quite a few steps and requires plenty of know-how. In order to save yourself the frustration and to ensure the ceiling fan is safely installed, contact Electrical Gurus today.

relatively high ceilings. Drive by any industrial park, warehouse, or factory, and walk inside and what you will see is a high bay light.

But walk into any factory or warehouse and you will see different styles and options, wattage’s and configurations. Traditional high bay fixtures that were once common place were Mercury Vapor, which were then replaced with High Pressure Sodium and Metal Halide bulbs. As new technologies were introduced, and old technologies became more common, the old HID bulbs were replaced with Induction and Fluorescent light sources. And more recently with the more wide spread approval and popularity of LED, we started to see conversions from these older technologies to the latest energy saving LED High Bays.

A High Bay Fixture, depending on the light source, can take on many forms and shapes. If you consider a Metal Halide or High Pressure Sodium fixture, they typically consist of a large heat sink block at the top of the fixture that typically houses the fixtures ballast. Below is an aluminum or acrylic dome and at the top of the dome is the HID bulb. These bulbs typically come in two wattage’s, 400 and 1000. 400 Watt Fixtures tend to be installed in ceiling heights no higher than 30 feet, 1000 watt fixtures are typically 40 feet or higher. Interestingly enough, spacing of lights is similar to the height they are located off the floor. A fixture installed at 20 feet from the floor is installed in a 20X20 pattern, 30 feet in a 30X30 pattern, 40 feet in a 40X40 pattern. Of the 3 type of HID bulbs, Metal Halide tends to be the best option. High Pressure Sodium Bulbs are very low on the temperature color and have the warehouse aisles have the ability to focus the light where it is needed. A light designed for a warehouse aisle is a lot different than a light designed for a gymnasium or a factory floor. In these spaces, a light that can flood the area evenly is important, in a warehouse aisle, a light that can light up the face of the shelves and the floor below is important. And when selecting energy efficient options, its just as important to understand the technology and what it is capable of doing. Adding controls to a T5 fluorescent fixture is a good idea only if the ballast is designed to handle that requirement and not lower the life expectancy of the bulbs. Motions sensors and daylight controls that dim the light output based on occupants and the amount of daylight available in the space. Technologies such as metal halide and high pressure sodium are not a good choice as these technologies are not good at dimming or turn on or off quickly. Fluorescent can dim, but you need special ballasts for them. So knowing what you want to do and may want to do is important at time of purchase, because not having the proper equipment or options could mean a costly lighting warehouses, factories, gyms and readily available through the utility companies, and mass adoption means the technology of LED had matured to the point where the questions and disbelief of past years have gone away.