When it comes to replacing a main breaker in your home, it may feel like an overwhelming and expensive task, and you likely want to be sure that is your only option before you move forward to schedule the electrical services. Finding an electrician you can trust can help you to decide whether main breaker replacement is your best option, but you may also want to learn the basics yourself so you can make an informed decision on your own.

Let’s take a look at the basics of circuit breakers and the main breaker, how they work, and when you would need to consider replacing a main breaker:

Circuit breakers exist to keep the home’s wiring from getting overheated or catching on fire. The necessary size of the breaker for a home depends on the wiring size as well as the expected electricity load that it will support. When the circuit breakers are in a closed position, they conduct electricity. However, when the flow of electricity (measured in amps) goes beyond what the breaker can handle, it trips or opens. This activity “breaks” the circuit and stops the energy from flowing.

You can reset the circuit breaker by closing it, but repeated tripping and the need to reset the circuit over and over can wear down the breaker, which can end up reducing its capacity.

The main breaker is the circuit breaker that serves as a safety feature to protect your electrical panel from overload. Overloading can then lead to overheating, which is obviously a fire hazard. This breaker is usually located at the top of the smaller circuit breakers in the electrical panel. Some main breakers are locked in place, while others snap or slide in. The main breaker serves to turn on and off power that is incoming to the home. Without a well-working main breaker, you will likely have major power problems, and it may even shutdown altogether.

While sometimes your main breaker will fail without any warning, you will usually have signs that point to it wearing down. Here are the typical warning signs that will clue you into something being wrong:

If you are noticing several of the signs above, it’s time for a main breaker replacement. If you are only experiencing one or two symptoms, you may just need some repairs. However, in either case, you need to call a professional electrician for an appointment immediately. An expert will be able to assess the situation and determine exactly what is going on and provide you with a plan of action to get your electrical services running smoothly and safely once again.

I grew up in the 90’s, back when thrift store shopping was considered alternative and grunge.  While I tooled around Goodwill listening to Nine Inch Nails on my Walkman, my more sophisticated friends were at the mall, looking adorable & stylish in the latest trend from The Limited.

But that was the 90’s.

Thrift-store shopping, dumpster-diving, and hand-me downs deliver a new parlance that has clever DIY’ers quaking with excitement for Saturday yard sales and obsessively scouring Craigslist for the Next Big Find.  This elegant new term for taking used items and making them new = REPURPOSING.

Also commonly referred to as recycling, upcycling, reinventing, revitalizing and/or reusing, entire boards are dedicated to this subject on Pinterest. Everything – and I mean everything – can be repurposed.  So why not the light bulb?

With a few basic tools and a steady hand, a light bulb can be hollowed out and transformed into a unique gift or decorative project.  Prepping the bulb, however, is not a task that we recommend for the kids.  Before you undertake any of these projects, take a moment to read a tutorial on how to safely hollow out a light bulb.

1. Witches Brew

Juggling the seemingly endless myriad of accessories, appliances and tools that have become commonplace in modern homes can sure be a hassle. Many homeowners find themselves routinely swapping plugs, or using devices like a power strip. While these can suffice in many situations, and offer a (relatively) effective solution, many make the mistake of relying on a power strip too much.

The only thing Kolb Electric takes more seriously than perfect service is safety! We don’t want to see you caught up in an electrical emergency, and to make sure you don’t we’ve built a short list of power strip safety tips. We also have some alternative, and overall superior, suggestions as well!

When deciding to use a power strip, keep these points in mind:

As we said, power strips are fine. In moderation, and as long as you observe proper power strip safety. But there’s a better solution! You aren’t simply stuck with however many outlets are currently installed in your home. Additional outlets can provide a safe, dependable and long-term solution to your electricity needs! The process is quick and simple in the hands of a professional, and will have you set to handle all of our modern lifestyles.

No matter what you require for your home, the experts at Kolb can provide the electrical access you need! We’ve been handling electricity, wiring and appliances for years, providing our consumers with only the absolute best in service, skill and technology. Contact Kolb today to learn more about our services, or to set an appointment!

Even though our weather has been unseasonably warm as of lately, that doesn’t mean that fall tasks should be ignored. Fall is the perfect time to review whether your heating system needs replacement, prep your home for the cooler weather eventually to come, and install systems that can help make winter a bit more bearable when it does hit. One of these systems is a driveway heating system.

Basically, a heated driveway keeps your pavement warm enough to melt snow as it falls onto the surface, rather than letting the snow pile up. There are two basic types of snow melting systems used for your heated driveway. The first is an electric system that uses electric cables installed into your driveway. With this method, electrical resistance is used to generate heat and an activation device is used to tell your system when to kick into gear.

Another option we offer is the hydronic snow melting system. This utilizes a closed-loop tubing system which is installed in the concrete or asphalt of the area that the system will treat. A water/antifreeze solution is heated and circulated throughout this tubing, thus melting the snow.

Some of the benefits of heated driveways may seem pretty apparent, such as the elimination of the need to shovel snow from your driveway! There are more benefits than just that though. Driveways that are heated prevents ice accumulation during freezing rain, making the act of walking to your car safer. There’s also no need for the use of salt or other snow-removal chemicals, which means your driveway won’t be exposed to the amount of damage these things can do.

Modern day living is highly reliant on the use of electricity and the different appliances, equipment and fixtures it powers. Industries are even more reliant on electricity and their profitability is closely knit with how seamlessly their systems operate. They rely on electricity to such an extent that they rarely give it a second thought; well, at least not until something goes wrong such as:

Most of these problems can be attributed to poor power factor. Let’s understand a little more about what that is.

Power factor is essentially a measure of how effectively the incoming power is being used by the electrical equipment on your premises. It is expressed in terms of a numerical value in the range of 0-1. A higher power factor indicates that the electrical equipment is being used more effectively.

For instance, if the power factor is 0.8, it indicates that 80% of the power supply to the equipment is being utilised effectively and that 20% is being wasted. Regardless of what this ratio of effective usage Vs wastage is, the latter is an unnecessary expense. Typically, your power factor should be closer to 1; it indicates that your site is using energy in an efficient manner.

A number of businesses are currently being charged a kVA tariff and not a kilowatt tariff. This means, your service provider is probably charging you for the power they supply to you, rather than that you actually use. Simply put, you are paying for power that is being supplied to you, but which is being wasted. If your business has a low power factor, it means you pay even more for this waste. There is another aspect you should keep in view. As mentioned at the start, poor power factor has the potential to cause power drops and power losses; in turn, these lead to motor failure and overheating and failure of other equipment too.

Installation of Power Factor Correction equipment might just help avoid prohibitively expensive infrastructure upgrades; it does this by reducing the current electrical demand on your system & improving the efficiency stability. Based on which tariff you are on, power correction might just prove to be an excellent way for your business to deescalate its electricity costs.

The power factor can be improved by installing Capacitor Banks. These are PFC (Power Factor Correction) equipment and help correct the inefficiencies in the energy supply. Apart from this, they also reduce the peak demand on the power network. This is an effective and cost-effective solution to reduce your power bill as it helps lower the monthly demand and the capacity charges. Generally, the payback periods for PFC are between 1 and 3 years. Taking the life span of the PFC equipment into consideration & the potential savings, this investment can prove to be very worthwhile for you.

If you feel that you are paying too much for electricity, we at Allround Electrical can conduct a survey of the equipment used on your site and map their electrical consumption against the power your plant is using and is being charged for. We will then provide you a report of what your power factor is; and if it is low, how it can be corrected. For more information, call us at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263