What does CAN Bus mean?

CAN Bus means Controller Area Network Bus. This system monitors your vehicle and reports operating conditions. CAN Bus systems are commonly found in European vehicles such as BMW, Audi, Mercedes, Volkswagen, Porsche, and in many American vehicles. While most late model American vehicles have CAN Bus systems, it is always good to check with your vehicle dealer to see which system your vehicle has before purchasing electrical products.

Will CAN Bus LED Bulbs Prevent “Bulb-Out” Indication?

Each vehicle has different requirements that the CAN Bus system is looking for, but in most cases CAN Bus LED bulbs should prevent a “bulb out” indication in areas such as tail, brake, and running lights. If you use a standard LED bulb that is not a CAN Bus application, you would consistently get a “bulb out” dashboard indicator because your system can’t communicate with a standard LED bulb.

Will CAN Bus LED Bulbs Prevent Hyper-Flashing?

CAN Bus bulbs will not prevent hyper-flashing of turn signals. These bulbs are communicating with the CAN Bus system, but the relay still needs an appropriate amount of load to operate correctly. Your electrical system could require load resistors or an electronic flashing relay to stop hyper-flashing. The factory relay causes the hyper-flash when it thinks there is not a bulb working. For more information, see our blog post here.

Power failures are frustrating and difficult in ways people don't always understand. Being used to having a steady power source, you don't always think of the full effects of a power outage. If the power outage is short, it can be fun to have a cookout on a grill and a family dinner by candlelight. The TV doesn't work, so you might find a movie to watch on your computer, until you realize you don't have enough battery life and there is no way to recharge it. You want to call the power company to find out what is going on, but they put you on hold and again, there's no way to charge your phone battery. You might decide to go out to eat or even stay with friends, but you, your spouse, and your children need to bathe first and there's no hot water.

Today: Backup Power Source

As lighting technology has advanced, one of the clear front-runners in long lasting, energy efficient lighting is the LED light. With uses ranging from interior lighting to landscape lighting, there are many reasons why you should switch your home lighting over to LED. Because LEDs are being manufactured in many of the same form factors that you are familiar with, you have the option of calling a Burbank electrician such as The Electric Connection to help you switch out the majority of them if you feel it’s too overwhelming of a job, or you could take it on by yourself. If your lighting project is more extensive than changing out a few light bulbs, and you plan on installing recessed lighting or new fixtures, you should definitely look into having the work done by a professional electrician in Burbank.

Benefits of LED Lights

The most publicized benefit of using LED lights for most lighting applications is the extremely low energy usage and long lifespan. This benefit is seen best when compared by an electrician in Burbank CA with other light bulb technologies. A standard incandescent bulb has a lifespan of around 1,000 hours, a compact fluorescent has a lifespan of around 8,000 hours and an LED has a lifespan of nearly 30,000 hours. This is a huge increase, meaning that you will have to change your bulbs much less frequently than before. Furthermore, LED light bulbs are mercury free, unlike compact fluorescents.

In regards to energy efficiency, LEDs are also way ahead of the pack. As a result of the low energy required to run an LED bulb, there is also much less heat required. This leads to lights that are cool to the touch, making them much safer for many applications. When asked about power consumption, an electrician in Burbank will tell you that LED bulbs use much less than any other currently on the market. For example, a 40-watt incandescent bulb burns just as bright as an 8-12 watt compact fluorescent or a 4-5 watt LED. By switching from incandescent to LED, you’re only using about 10% of your previous energy. This can make a huge difference, considering that lighting can make up almost 25% of any home energy budget!

Choosing an LED

When choosing an LED, there are many factors to be taken into consideration. If your home lighting project is extensive, think about doing a quick Internet search for electrician Burbank and then find one that you can trust such as The Electric Connection. Working with an electrical contractor on this type of project is very much like having ceiling fans installed, outlets replaced, bath fans installed or having new switches or lighting dimmers installed. A licensed Burbank Electrician such as The Electric Connection will be able to explain everything that needs to be done in order for your custom lighting job to be done well. If you are just looking to replace some of the bulbs in fixtures around your home, there are just be a few things that you should know.

To make things simple, most packages rate their light bulbs with both actual watts, and watts relative to an incandescent. This means that if you are using a 45-watt incandescent, you should be able to find a 3W LED with packaging that lets you know that they are equivalent. If these comparisons are not listed on the box, there should also be a lumen rating. If necessary, you can compare the lumens between types of light bulbs. When choosing light bulbs for your fixtures, you will most likely be shopping for diffused bulbs. These bulbs look very similar to a standard fluorescent bulb, and help to diffuse the light. This gives the light a more natural feel. Other types of lights include outdoor landscape lights, such as floods and interior spotlights for more focused light concentration. Regardless of what type of lighting you choose, your licensed electrician Burbank CA can always help you with any questions that you might have. Enjoy your new lighting!

Visit our company profile.

Many people have heard about power factor correction, but aren’t too sure about exactly what it means, or is. Here is some basic information about it, in very simple words. Power factor is essentially a measurement of the effectiveness with which your commercial business uses the energy that’s supplied to your location.

In an industrial setting, you are able to reduce the amount you pay as a power bill, by cutting down the power factor surcharges that show up on various electricity accounts; these show up as the peak demand charges from your power company. This is exactly the reason why there is such a huge growth in power factor correction.

Currently, many businesses are being charged via a kVA tariff, rather than a kilowatt one. This also means there is a distinct possibility that your electricity service provider is charging you for power they are supplying to you and which you aren’t really using. In short, you end up paying for power that’s going waste. The other considerations:

Every industrial setup has different power requirements, different types of equipment and tools that run on electricity; and it’s important that you connect with a company that is able to understand your requirements and provides custom solutions. Once they help set up the right kind of power correction equipment, you can benefit in a number of ways.

As a business owner, you know you want to reduce operational costs and while you are sure to have a number of other measures in place, understanding how power factor correction will help you, is one way of making a significant change. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of power factor installation solutions. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263