We know your family’s safety is important to you, but have you ensured their electrical safety? The amount of electricity running through your home has enough power to cause death if electrocuted.  Implementing a few simple tips regarding your cords and plugs, outlets, and circuit breakers could potentially prevent injuries or fires in your home.

Cords & Plugs

All your electrical appliances have cords, and being a daily item, many times we overlook any wear-and-tear that could potentially be a safety hazard to your family and home. Make it a habit to check each appliance’s cords and plugs before every use. Check your cords for any frays, cracks or kinks. If they are damaged, replace the power cord before use; such exposures could be a fire hazard.

Also, make sure to be using your cords appropriately. As much as you want to tuck away or hide your cords, never staple or nail cords in position! Try using tape or twist ties to secure your cords safely. Also, refrain from running your cords through doorways or under rugs, this could cause damage to the cord or cause overheating. Instead try using an extension cord to safely reach that desired location in your home. Although, extension cords are not intended for permanent use, this should only be a temporary solution. Consider rewiring if you are really tied to having your appliance in a specific out-of-reach position.

Outlets

Once you are confident that your cords are safe, now you need to ensure that your outlets are also safe. Every outlet should have its wires covered by a secure plate and if you have children, make sure your unused outlets are covered with a childproof cap. Avoid using multiple adaptors or power strips, which can overload your outlets and cause fire hazards. Instead, relocate your appliances to another outlet.

For outlets located near a water sources like your bathroom and kitchen, you should check to make sure that your home is equipped with a GFCI (ground-fault circuit interrupter) outlet. This is a fairly new technology of which is now mandatory in all new houses built. A GFCI will protect your family from electrical shock if it ever comes in contact with water.

Circuit Breaker

Your circuit breaker protects electrical wiring from overheating or catching fire. If too much electricity is passed through a certain fuse it will “blow;” breaking the flow of electricity. If this happens, the fuse needs to be replaced – make sure to find the right size fuse to allow the appropriate flow of electricity. Your circuit breaker should always be easily accessible and all members of your family should be aware of its location and how to use it when the time comes.

Your electrical appliances, outlets and circuit breakers are constantly changing over time so make sure to be checking them regularly. Make this a household habit for your whole family. If you notice any signs of electrical issues such as dimming or flickering lights, unusual sizzling or buzzing sounds, or if your circuit breaker is continuously tripping, call an electrician from Expert Electric at 604-681-8338. One of our experienced electricians will gladly examine your home for any electrical concerns.

Your family’s safety is our top priority!

When you plug something into an outlet in your home, you probably don’t really take the time to think about where the electricity to power your appliance comes from. You plug it in, it works. But, what do you do when it doesn’t work?

Homeowners are constantly making improvements to their home. This may include upgrading or installing a new air conditioning unit, replacing the old fridge with a newer, more family-friendly model or adding a hot tub to the backyard. If you have already made these investments or are considering making them, you should contact your electrician. Beverly Hills residents can rely on the professionals at The Electric Connection to provide fast, friendly and knowledgeable service.

An electrical inspection will be needed to determine whether or not your existing electrical panel can handle these much larger items. Hot tubs, AC units and larger power tools will need more power than the typical appliance. If you have a newer home, it is a fairly simple process for an electrician to install the outlet needed to power the new item.

Older homes may need an electrical panel upgrade to support the electricity demands. An additional breaker may need to be added. In fact, this is may apply to newer homes as well, depending on the service that was put in during construction of the home.

If you have already hooked up a new refrigerator or stove and notice you seem to be tripping breakers, it is likely you need an upgrade. This is a sign there is too much draw on a breaker or that a breaker is weak. An electrician in Beverly Hills will be able to determine what the problem is during the inspection. If you are ready to take care of those tripping breakers or have more questions about what it takes to get your new appliance properly wired, give The Electric Connection a call.

Purchasing a new home can be both an exciting and stressful experience. While you may like what you see on the outside, we all know that there can be problems hidden behind the walls. When it comes to electrical, not only can improper work cost you lots of money, but it can also be dangerous. If you are browsing for a new home, make sure you are cautious of possible issues that can arise.

As we have written about in the past, the main service panel is a critical part of the home electrical system. This is what controls the electricity in the entire home. Over the years these panels can become old and worn. Sometimes additions may have been made to the panel, but not done correctly. When looking at a service panel it is important to look for any loose or wires and connections into the panel. The wires should be tight to avoid electrical outages and flickering. Loose wires can also cause sparking and lead to fires. An expert electrician can also identify the amount of wires going into each circuit breaker and the organization, which can help with safety and efficiency.

One concern many people have is what kind of wiring is behind the walls. Many of us have heard of aluminum wiring and that we should avoid it. The problem with aluminum wire is that the wires can become loose more easily and also heat up, becoming more prone to electrical fires. Old knob-and-tube wiring can also become weak, break easily, and cannot function at today’s standards. It is a good idea to have an expert electrician inspect the wires in your prospective home to make sure they are safe or whether they need to be upgraded.

Outlets in the home should also be easily tested. Check to make sure that none of the electrical outlets look burnt, dirty, or are loose. Outlet testers can be test to make sure that they are properly grounded and being fed electricity properly. It may appear that the outlets function properly and can continue to do so without being properly grounded. But in the event of a power surge, especially in a major appliance, the electricity will not escape through the grounded wire and can cause electrocution.

These are just some of the potential electrical problems that a home can have. In order to protect yourself and your investment, have a home inspector visit the home. If you have just purchased a home, have an electrician inspect it for any possible issues and for a more thorough analysis.

For anyone who is in control, manages, or even owns a facility that has a parking lot for either employees, customers and clients, or both; you know that security and protection of everyone is paramount.

With outdated, inefficient, and low quality output per watt, which is all that matters when it comes to getting the most efficient lighting. The reasons behind this is because let’s say you have two different LEDs products, one outputs 135 lumens per watt while the other is at 120 lumens / watt. To power a light that outputs at 18,000 lumens; the 120 lumen per watt fixture will take 150 watts to reach 18,000 total lumens. While the 135 lumen per watt fixture will only require approximately 133 watts to generate same exact amount of light that the other higher watt fixture products.

See the important of lumens per watt? It’s everything, and we believe

Here’s another project of ours where we retrofitted an existing fixture in a parking lot (before and after):

The image list could go on, but the gist is this: LED has and will always improve your facility’s lot. Just look at the images yourself for the proof!

By choosing LED parking lot products for your facility, you are choosing higher quality along with higher efficiency products. LEDs (more specifically MyLEDLightingGuide’s) offer a better Color Rendering Index rating talked about before is about lumen depreciation. Metal halide and HPS experience greater and quicker depreciation in lumen output than any LED product does. So while a brand new and freshly installed metal halide fixture may look the same as an LED to start off its life; give it a few years and watch the difference. LED is almost guaranteed to be brighter for longer.

On the topic of saving money, how about the final benefit that will make you fall in love with LED technology and what it can do for your business.

While you need to be careful which LED products you purchase and from where you buy them from; commercial LEDs are just as open to rebates as any other.

Something called DesignLights Consortium (DLC for short) qualifies products and lists them on their site if they pass vigorous tests set by them. They offer two types of listing: commercial rebates but they also prove to be lesser of quality. Think; if a company offers quality lights what’s their reason not to get qualified? There isn’t, and that’s exactly our point.

Thankfully there are many DLC qualified products out their on the market, including ours. You can always take a look around just to say hi!

Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.