Zinsco or GTE-Sylvania panels were incredibly popular during the 70s. Despite Zinsco no longer being around today, many homes still have these panels inside. The circuit breaker in these panels can melt to the main bus bar, hindering the breaker’s ability to trip when it needs to. If there is a short circuit, the wires can melt and cause a fire. Not all Zinsco panels are at risk, so have an electrician look at yours if your home has one.

Federal Pacific Electric panels are extremely unsafe, despite being installed into millions of homes throughout the 50s to 80s. These panels’ circuit breakers fail to trip when there is a circuit overload or short circuit. If a panel’s circuit breaker doesn’t trip when it’s supposed to, it can lead to an electrical fire in your home. If your breaker box has “Federal Pacific Electric” written on the front and “Stab-Lok” branded on the inside of the panel, your home could be at risk.

Fuses boxes are not inherently dangerous. In fact, many homes have fuse boxes and are not at risk. The risk with fuses comes from using them in an unsafe way to serve today’s energy demands. By placing too many things on a single circuit, replacing a fuse with a bigger fuse, or replacing the fuse with something metal creates a potential fire hazard.

Again, these kinds of panels are not dangerous by themselves. What makes them dangerous is the fact that they haven’t been used for over 40 years. If your home has a split-bus electrical panel, it could be past its expected lifespan. The circuit breakers may not trip as they are designed to.

On any job site, having the right electrical safety gear is essential. For electrical projects, there are often special considerations, as some tasks can have unique hazards that require special gear.

Eye injuries are serious and for most electricians are a daily hazard. Having, and using, the right eye protection can make all the difference.

Electricians often work at heights, either on roofs, scaffolds, or elevated work platforms. In some locations, even working on a step ladder can require fall protection gear.

When the potential exists to fall more than 6 ft., fall protection gear should be worn. This includes an approved and inspected harness and a lanyard with the correct weight rating. Always ensure that the fully extended length of the lanyard is short enough to prevent the worker from contacting the ground in the event of a fall.

Hand injuries are the most common type of workplace injury, therefore selecting and using the right kind of gloves is vital.

Along with proper knife safety practices, using cut-resistant Kevlar gloves can greatly reduce the potential for cuts and scratches. In cold weather, ensure that insulated gloves are worn. When dealing with potentially hazardous chemicals, use gloves rated to handle the specific associated hazards.

Are you still using incandescent light bulbs? Your electrician would recommend a different course. Efficient lighting technology has blown up in the last few years, and advanced technologies are just getting better. Light emitting diodes, or LEDs, are at the forefront of modern lighting thanks to their inexpensive and long-lasting luminescence. Some of these new diodes are leading the pack in must-have lighting features, including smart home integration that you can control with your phone. Read on to learn more about the latest in LED technology.

Upfront Costs are Dropping

One of the biggest complaints about early LEDs was the price. Almost any LED will save you money over time compared to an incandescent bulb, since they use 25 to 80 percent less electricity and can last up to 25 times as long, but many consumers balked at paying the $35 or higher retail price for a single bulb. Newer models, however, can recreate the look of that classic 60 watt incandescent bulb with fewer LED panels, meaning they are cheaper to produce and sell for $10 or less.

Options are Expanding

Other common complaints about the first LED models were that the warmth of the light wasn't quite right and they didn't work with accessories like dimmers. With today's technologies, however, you can find LEDs that give off almost any color and lighting profile, allowing you to mimic the look and feel of your old incandescent bulbs or tailor your room to fit more eclectic tastes. Not every LED is compatible with standard dimmers yet, but many are – just check the label on the box to make sure.

Make it a Smart Bulb

Many new LED models are designed specifically to work with smart technology. That means you can control them from your phone no matter where you are, set up a schedule for them to turn on and off, and even have different colors or light intensities at different times. Newer bulbs are also optimized to work with your other smart home systems to move you closer to a goal of integrated whole-house control.

Turnkey Functionality

One of the biggest advantages of upgrading to LEDs is how easy it is. There's no need to hire an electrician to set up new wiring or fixtures – the bulbs screw right into the pre-existing bases, out of the box. If you want tips on how to make the most of your new lighting options and create the room profile that fits your home, however, don't hesitate to call up your local electrician for guidance and advice.