As a homeowner, you tend to notice electrical issues like flickers, breaker flips and outages. But keeping an eye on your electrical meter is important too! Without the occasional peek, you could find yourself with higher than average bills, or even a completely unexpected shut off.

The certified electricians at Kolb Electric naturally have spent loads of time with electrical meters, and we’ve got plenty of good information to share this week. Follow along to learn about issues that may arise with your meter, what they mean, and whether or not they indicate a faulty electric meter.

Hard to find a problem if you can’t find the meter, right? Electric meters are most commonly located on an outer wall; usually near where your power line runs. In some homes, particularly older ones, the meter might be found in the basement or a utility closet.

If you live in an apartment, the meter is almost always found near your building (or on it) in a cluster. The cluster houses meters for every unit, and all of them should be clearly labelled with the apartment number on them.

Do be aware that the chances of your meter being outright faulty are fairly low. The machines have exceptionally long lifespans, and are built to endure. It’s more likely you have one of many other electrical concerns, however, it is always best to check with a certified professional electrician if you have any questions or problems. While uncommon, a faulty meter is a pretty big issue, and you don’t want to leave it to chance. Just don’t be surprised if the issue turns out to be something else!

Whether you’re worried about your meter, or you’ve got any number of other electrical problems, the experts at Kolb can help! We provide our consumers with only the absolute best, both in service and skill, and we’re confident in our ability to meet your unique needs. Contact Kolb today to learn more!

Electric cars are becoming very common. If you have visited a car lot lately, you will see the selection has increased dramatically and Prius is no longer the only game in town. It is the future of cars and there is no time like the present to start learning the ropes of using an electric car for your transportation needs. A Santa Monica electrician is here to help you make the most of your new electric car or make your old one a little better with the installation of a Level II charger at your home. The team at The Electric Connection can assist you in getting the most out of your gas-saving car.

One of the problems with electric cars is their inability to drive long stretches on the battery alone. They are great for commuters with short distances to travel. Most electric cars can go anywhere between 40 to 100 miles on a single charge. Unfortunately, it can take a full day for a car to get a full charge when using a Level I battery charger. An electrician in Santa Monica can install the 240-volt outlet you need to run the Level II or fast charger in your own garage. This means, every day you get home from work, you plug in the car and it is fully charged and ready to go the following morning.

The faster chargers are a bit more expensive up front, but when you factor in the gas savings, it is an investment that will pay off over time. It is also more convenient in general. Because the charger requires more electricity to run, you will need an electrician. Santa Monica homeowners can decide where they want to charge their car and have the outlet installed nearby. Give The Electric Connection a call today and schedule your installation.

With spring upon us and summer just around the corner, you are probably itching to get the pool uncovered so you can host the first pool party of the season. Before you do that, you may want to consider upgrading, adding or replacing your existing pool lights. Pool lights add a certain quality to a pool while providing a layer of safety. However, there are several lights to choose from and you need to know which lights are best for your needs. An electrician in Beverly Hills has some tips for you to use when choosing your pool lights. If you have any other questions, you can call The Electric Connection.

There are two main options available for your pool lighting needs; in-ground and above ground. The above ground option is the cheapest. The in-ground tends to be a favorite simply because it provides a more uniform look.

Above Ground Options

Floating pool lights are inexpensive and do not require a Beverly Hills electrician to install. Simply pop the lights in the pool and it is done. The lights are festive, but they can interfere with swimming. You will also not have the benefit of the lights being stationary. It seems they tend to congregate and float to one area of the pool. For soft-sided pools, there are magnetic lights that stick to the side. These are again very easy to install and reliable. In Ground Options

LED bulbs are extremely bright and will last for around 10,000 hours. The lights are sealed in a waterproof housing. You can expect the bulbs to last anywhere from 10 to 15 years depending on how often the lights are used. Fiber optic lights are another option. However, they do tend to be much more expensive and the bulbs do not last nearly as long. In either case, you would need the pool lights installed by an electrician. Beverly Hills homeowners need to hire a professional to ensure the lights are installed safely and do not pose an electrical hazard. Give The Electric Connection a call today to schedule your pool light installation.