Doing work around the house without calling for help is a common point of pride for many people, but an amateur should never tackle an electrical panel installation — regardless of the bragging rights on the line. No amount of pride is worth an incorrect electrical panel installation, especially when you consider just how important and complicated this component can be. Additionally, you should remember that electrical work can be extremely dangerous for anyone who isn’t a professional.

This principle most definitely applies to putting in a new electrical panel. If you’re knowledgeable enough, you may be capable of replacing an outlet or switch on your own. For bigger jobs like this, however, it is critical that you bring in an electrician. Not only would you be in danger during the installation itself, but even small mistakes made during the process can lead to future risk of fires and electrocution.

Electrical code requirements control the size of a panel in a newly built or renovated home, and these rules can vary based on your location. There is a reason there are strict measures for electrical panel installation, and those reasons are clear when you consider just how important these panels are. Panels are essentially a central hub for the electrical system in your home. They are an important safety measure as well. The power that comes in from the electric company passes through your electrical meter, and then into the panel. The panel directs the electricity through your home.

Electrical panels use circuit breakers, which control the amount of current provided to an outlet. They also serve to protect your system (and home) from power surges. If the breaker identifies an excessive amount of current, it shuts it off and protects components from the overload. It does this in a fraction of a second. This keeps appliances safe and also protects your home from the risk of a fire.

An incorrect electrical panel installation undermines the safety measures of your panel. An inexperienced installer might accidentally connect a wire to a breaker designated to allow more current than the wire can safely handle. This means unsafe amounts of electricity would be passing through, and the panel would not be able to do anything about it. An overloaded wire could easily spark, which could then lead to a fire.

An electrical panel isn’t a component you want to worry about after installation. Unless you’re a professional, there’s no way you can promise this won’t be an issue after you’ve finished working. Beyond that, an experienced electrician can make sure the panel lasts for a long time.

By using sophisticated equipment and materials, as well as in-depth knowledge of local energy code requirements, a professional will be able to achieve a level of efficiency and quality that would be out of reach for any amateur. Your home will be better protected from future issues after thorough wire testing once the installation is complete. A new panel installation is an involved, intricate process, and it’s important that even the smallest steps are correct.

By: Jason Lee

From the standard AA battery to the relatively unknown LR44 battery, everyone everywhere should embrace all things battery operated on February 18, also known as National Battery Day.

The  “battery” can trace its routes to Benjamin Franklin who coined the term. In 1800, another inventor, Alessandro Volta created a steady current for a length of time using zinc and copper plates and brine soaked paper disks. Eventually, this primitive experiment in electricity would lead the way to the batteries we know today.

So don't be negative because Mr. Electric® has some positive reasons to celebrate National Battery Day.

Whether you have four, six or eight cylinders under the hood, chances are you only have one battery. No car or truck can run without it. So when you get in your ride on National Battery Day, take a minute to thank the true workhorse of the vehicle; the battery.

When it comes to handheld and portable electronic devices, not a single one would work if it weren’t for the battery. These devices would do little good for people on the go if they stopped working every time they were unplugged from the wall. Thankfully, batteries that drain slowly over time allow for us to be portable and still be connected to the digital world. All of this is made possible by the battery.

Battery operated drills and saws have made working at the construction site or doing home renovations a breeze. Workers can cut boards and build for hours before simply changing out the batteries. Once the workday is done, workers can charge the batteries over night and start again the next morning. With the advent of cordless tools, tripping hazards can be avoided. Blown fuses and tripped breakers are a thing of the past, all thanks to the battery.

On February 18, go out into the world with a positive attitude and change those who are negative around you by reminding them of everything the battery does on a daily basis. Who knows, doing it may give you a charge!