Photo via Kickstarter.com

Bosua didn’t design this light with merely lethargy in mind – its technological advancements also have the potential to improve your wellbeing. Here are a few things you can do with the LIFX:

While some of these features may seem silly or impractical (I’m sure not everyone reading this has robot dance parties on the regular) I believe there are 2 notable features that make this LED worth a try:

1. Energy Savings. For the equivalent brightness of a 60W incandescent, this light only uses about 10 watts of energy. Plus, by programming it to turn off when you’re gone and dim automatically, you can save even more energy with minimal effort. The creators also say the LIFX will last up to 25 years, so you won’t need to replace them for a very long time.

2. Changing Colors. While at first, turning your lights from blue to red to green might seem a little superfluous, if you spend long periods of time indoors under the same white, bright lights, it can start to mess with your circadian rhythms. Studies like Photo via Kickstarter.com

And if you ever lose your phone, don’t worry, because these lights still work with standard switches too.

The LIFX project is funded through Kickstarter, and light bulbs will start shipping in March of 2013.

You might be a fan of their appearance, but aluminum light poles bring more to the table than just their looks. Whether you opt for squared or rounded varieties, these light poles have become more popular than ever. This is thanks to their impressive ratio of strength to weight, as they are sturdy while still being lightweight. Additionally, they feature a high resistance to corrosion. These advantages, coupled with their recyclability, make aluminum light poles a perfect match for sustainable projects and harsher environments.

Aluminum is a great material to use when you’re prioritizing strength and reliability. However, just as important as the variety of light pole is the installation procedure. If your poles don’t have proper installation, you could be losing out on the benefits of the lights. A sloppy installation by the wrong people compromises everything from the reliability of the lights to your safety.

Not all vibration is bad, but the destructive form of it can cause serious damage over time as cracks begin to form and then spread along the pole’s side. If the pole’s movements are not equal in either direction, it is simply usual sway, and therefore no reason for concern.

On the other hand, if it is constantly moving back and forth an equal distance, with the motion based at the center of the pole’s shaft and not on top, you’re seeing potentially destructive vibration. Eventually, this can lead to the pole shaft cracking and falling, breaking just above the part of the base where the weld held it together.

Several factors contribute to pole vibration. These include the pole shape, the surrounding environment and the installation. Whoever performs the installation needs to follow the appropriate guidelines for the size and type of pole, as each pole can handle a certain load. If your installer uses the wrong light fixture, destructive vibrations could be inevitable.

Every installation job will have its requirements, based on the client’s needs as well as the location in question. One aspect that doesn’t change, however, is the importance of safety. Light pole installations fall under the umbrella of electrical work, which is always a dangerous area for anyone who isn’t an expert. Any piece of electrical equipment improperly installed can become a safety hazard, and aluminum light poles are no exception.

Your installer must comply with local codes and requirements as applicable. As such, they need to provide proper electrical groundings. Failure to do so can be a serious violation of important safety regulations. Worse, it can lead to a very dangerous situation for you and anyone exposed to the light poles.

This is the final post in our four-part series, "The Secret Guide for Super Moms” — tips, tricks and hacks for busy moms who need to know everything that’s happening in their house.

If you believe Pinterest, every home repair or improvement project can be a do-it-yourself job. Apparently, if every blog is to be believed, moms and dads around the country are remodeling bathrooms, rebuilding old houses and refurbishing vintage furniture -- and they do it all the time! And they look great doing it! And they have plenty of time to take lots of photos!

Maybe some people really are able to do it all (and write about it, too). Most of us are too busy and simply don’t have the training to do more than the basics around the house. When it comes to potentially dangerous repairs, a super mom knows that she needs a professional. When the time comes to fix, rewire or repair her home’s electrical needs, she knows she needs an electrician.

Electrical wiring is complicated and can be dangerous -- and it's tough to spot signs you need an electrician. An amateur electrical job may cause poor wire connections, overloaded circuits or faulty grounding. These situations are hazardous to you, your family and your property. While it may be tempting to try saving money by doing it yourself, or trusting your spouse or a friend to help, you're better off spending the money to have the job done right.

Let's take a fairly common scenario: your fuses keep blowing, or your circuit breakers keep tripping. Yes, you can keep replacing the fuses, but do you know whether they're the right type? Screwing in a 20- or 30-amp fuse as a replacement for a 15 is tempting—no electricians needed, right?—but now you've created a fire hazard by overloading your wiring. The smarter move: call a professional, certified electrician to wire a new circuit.

Like fuses, circuit breakers are meant to prevent circuit overload and the risk of fire, but we use much more electricity than people of our parents' or grandparents' generation. As you upgrade and add appliances and gadgets, you may need to upgrade your circuit breaker panels to adequately supply your home with power. Hire an electrician to do the job, not your brother-in-law who swears he did the same kind of work in the navy. The work is extremely complicated and should not be attempted by an amateur.

You aren’t blinking without realizing it; you aren’t sleepy or imagining things. Your eyes aren’t tricking you—your lights are flickering. There are a few different reasons the lights in your home might be flickering, so read on to figure out what your problem is, as well as whether it’s a simple fix, or cause to contact a professional here at Hoffman Electrical!

Our team has been providing top-class electrical services to Tampa and the surrounding areas for nearly three decades. Our team has the skill and experience needed to suss out your flickering light problems, guaranteed.