You work hard to keep a roof or your family’s head and you want to protect them while they are at home. You probably lock your doors and windows at night and leave a light so nobody trips when making one of those late night bathroom runs. Is there more you could do?

Carbon Monoxide and Smoke Detectors

You can add an extra layer of protection to your home for your family by having smoke and carbon monoxide detectors in the home. An electrician in Beverly Hills can hard wire a smoke detector into each room of the home. This is an ideal option, because you do not have to worry about batteries going dead or being “borrowed” for some toy or remote. The detectors rely on your home’s electricity. Of course, you will still need to have a battery powered detector in the home. In most models, the electric powered detectors also have a battery backup option.

Hard wired smoke detectors should be placed in every room somebody sleeps in as well as the basement if you have one. The detectors can be interconnected, so if one goes off, they all go off, alerting occupants to a fire. This is an ideal option for those who like to sleep with their bedroom doors closed.

Carbon monoxide detectors should also be installed by an electrician. Beverly Hills homeowners should absolutely have one of these detectors in their home to protect themselves against the odorless gas, carbon monoxide. As with the smoke detectors, an electrician will hard wire a carbon monoxide detector on each level of your home. These can be interconnected as well.

If you use a gas stove or have a garage connected to your home, you will definitely need to consider having a carbon monoxide detector. You can rely on The Electric Connection to get this extremely important job done for your family.

Power outages were something that we all thought were fun as kids. Any distraction from the normal routine was enough to excite us back then. Of course, looking back, our parents probably didn’t think that they were as much fun as we did, and with good cause. Power outages can be very disruptive, and can even create hazardous conditions in the home. If you own your own home now, you may want to consider the installation of a backup generator on your property. Backup generators in Boston, MA can help you to go about your business even when the power from the grid fails. Just remember that professional backup generator services are a must. Schedule your generator installation, repair, and maintenance with the professionals here at FB Electrical Services.

While very short power outages may not be that big of a deal for most people, the fact of the matter is that one can never be sure just how long any power outage can last. Some people keep a portable generator on hand, and these systems are capable of powering a few appliances or electronics that are plugged directly into the generator. This is fine for a quick fix or for recreational purposes. A backup generator, though, offers a level of performance that portable generators just aren’t on part with, though.

A backup generator is a permanent installation on your property, fueled by natural gas, diesel, or propane, generally. They are able to power whole systems throughout the house, depending upon the size and power of the generator. This means that, rather than running outside in a storm with an armful of extension cords, you can just fire up your generator and live as you normally would until the power from the grid comes back on. This is especially beneficial in any homes where medical equipment is in use, but everyone stands to benefit by having power continue to flow even when the electricity to your home cuts out.

Also, consider an automatic transfer switch for your generator. This may be an individual component, or you may purchase a generator with such a switch integrated directly into it. These switches are able to monitor the electricity in your home, and when the power goes out, they will start right up in order to minimize any disruption to your comfort or convenience. You won’t even have to leave the house to turn your generator on with such a system. To learn more about backup generators or to schedule professional generator services, just dial our number today.

If improperly installed, aluminum wiring can raise the risk of a house fires! From 1960’s up to the mid 1970’s aluminum wiring was sometimes used for branch circuit wiring instead of copper wiring.  During this time period copper prices were very high and aluminum wiring became a cost effect alternative to copper wiring.  Was aluminum wiring found to be as good as copper wiring?  Not even close!  Aluminum wiring quickly became a fire risk if not installed properly.  At the time aluminum wiring methods were exactly the same for copper.  Over time it was found that improper installation methods and electrical devices not designed to accept aluminum conductors could lead to fires.

If was quickly found out that aluminum wiring could cause flickering lights, hot electrical connections and even burned or melted insulation on the wiring.  There was a severe problem with overheating which can lead to fires.

1.  A Softer Metal.  Aluminum is a much softer metal when compared to copper.  During the stripping process from aluminum it can be easy to nick.  These nicks can cause hot spots in the conductor causing overheating and the potential risk of fire.  Electricians had to develop different methods of stripping the insulation off of the aluminum wiring to avoid damaging the conductor.

2.  Aluminum Expands.  When an appliance demands electricity on the circuit the conductor heats up.  While this process takes place with copper conductors too aluminum expands at a much greater rate than copper.  This expansion and contraction of the aluminum wiring  caused the the conductor to creep out from under the terminal screws on breakers and electrical devices such as plugs and switches.  This creeping of the wiring resulted in a loose connection which lead to sparking and potential fire.

3.  Corrosion or Rust.   When steel rust it becomes red, on copper rust is green, and on aluminum it is white.  When copper wiring rust it’s not as big as problem when compared to aluminum, copper rust is actually electrically conductive.  This rust on copper still allows the electricity to flow and doesn’t create as much resistance of the electricity or simplify put it doesn’t interfere as much.  However, when aluminum rust it forms a white oxide which is not a good conductor of electricity.  This creates resistance or reduces the flow of electricity.  This resistance interferes with he flow of electricity, and can cause overheating leading to fires.

There are several options for you if you have aluminum wiring in your home.  We can evaluate your homes wiring and come up with several effective methods and affordable price ranges.  It’s important to have your homes wiring thoroughly evaluated so you can know the truth about its condition so you can make the proper decision.

Solution 1.  Rewire the entire house with copper wiring.  This would be the safest long term solution for aluminum wiring.  This method would require reduced maintenance and reduced inspections needed when compared to aluminum wiring.  Rewiring the home is the safest long term solution to aluminum wiring when compared to other methods.  This solution can be expensive when compared to other solutions.  However, we have a variety of financing options and payment plans available for almost every budget.

Solution 2.  Check all connections in home and repair as needed.  Then re device the entire home with aluminum rated devices.  This short this method entails replacing all the homes plugs and switches with ones that are designed to accept aluminum conductors.  It’s important to note aluminum rated devices can be hard to find at the big box stores.  When these devices were first introduced they simply had a larger screw or terminal for the aluminum conductor to fit under.  Unfortunately, these CU/AL devices failed to work good enough and was not an effective solution.  New devices CO/ALR are created out of a similar metal which shares a similar expansion and contraction rate as aluminum which reduces the creeping of the conductor.

Solution 3.  Pigtailing.  Pigtailing simply means taking the aluminum wire connections that go to the device and splice on or pigtail on a copper conductor to go to the device such as a plug or a switch.  It is important to note that it does take a specially designed wire nut or twist-on wire connectors to to perform this method.  While this method is the cheapest it is important to make sure that routine safety checks and inspections are performed on your homes wiring to reduce the chances of future problems.

Even with all the disadvantages, aluminum wiring still has its advantages under certain applications.  It’s important to note even with these advantages you should not use aluminum wiring in your home for standard 15 or 20 amp branch circuits.

1.  It’s Light Weight.  Aluminum is lightweight in nature.  Being lightweight is an advantage when conductors are used over long distances.  This lightweight property is most beneficial for aerial applications were the aluminum wiring is suspended between poles.  This wiring method is most commonly seen in utility company applications and telecommunication lines.  Being light weight also makes the aluminum wiring easier for the installer to work with.  This makes the cable less physically demanding to install.

2.  Aluminum Wiring is Cheaper.  Aluminum wiring can be half the cost of copper wiring.  When a large amount of wiring is needed saving half the cost can be a huge benefit over copper wiring.  This method is mainly seen in feeder circuit applications in commercial buildings as well as sub panels and 220 circuits in residential applications.  It’s important to note this practice of using aluminum wiring for sub panels, services, and 220 circuits in residential applications has been deemed acceptable when properly installed and connected.