Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

In these modern times, where a lot of stress is put on the importance of recycling and saving resources, one may wonder if it’s wise to use reconditioned electrical equipment. After all, it is a great way to save money and use materials that would otherwise be thrown out. But one also must consider safety which is key when you are thinking about any kind of electrical materials. Well, that truth is, there are some times when it is safe to use reconditioned electrical equipment, and other instances when it is not. Read on to find out the best ways to determine whether the reconditioned electrical equipment you are using is safe.

Many people believe that reconditioned electrical equipment is not safe. The truth is, sometimes it can be even safer than its original state. This can be the case when old parts are replaced with newer components that are safer and more efficient. However, that doesn’t mean that all reconditioning is done safely. Determining whether or not your replaced parts are in accordance with safety standards. A few prerequisites must be met by the company that is updating the equipment.

Check out our top 10 picks for the most enchanting crystal chandeliers of the year.  These timeless designs are destined to become heirlooms in the finest homes around the world.  More than that–the crystal chandelier has taken center stage in the modern lighting industry with LED illumination and a variety of creative interior design applications.

From master bedroom closets to kitchen island lighting, crystal chandeliers are celebrated for their sheer elegance and energizing aura.

“Maya” from Cristalstrass, seven tiers of good luck!

“Valencia” from American Brass and Crystal, made exclusively in America with a fantastic array of customizable finish and crystal options!

“Da Vinci” from Geometrix by Schonbek, colored crystal from Schonbek continues to dazzle!

“Florale” from James R Moder, Imperial crystal blended with the whimsical beauty of nature!

“Primo” from Elegant Lighting with Swarovski crystal for the classic traditionalist!

“Original Classics” from Bar Del International feature Swarovski Spectra crystal and colorful accents such as Grapes with Green Leaves!

“Marquise” from Fine Art Lamps, hand-cut or smooth polished–these crystal elements sparkle like diamonds!

“Renaissance” from ELK Lighting, a Sunset Silver finish infused with polished lead crystal is magnificent!

“Byanca” from Savoy House, the Mohican Bronze finish draped with crystal beads makes for a breathtaking standout!

“New York” from Trump Home, lighting design combined with rich sophistication and the unmatched excitement of New York City!

Available in a variety of shapes and sizes and with multiple base types, these long-lasting LED bulbs are perfect for an elegant, vintage look. Chips-on-board (COB) LEDs imitate the look of thin filament wire in antique-style bulbs and emit a rich, warm white or ultra-warm white color. The decorative bulbs are great for many applications, such as chandeliers, wall sconces, ornamental fixtures, and light strands, and they consume only a fraction of the energy consumed by incandescent bulbs.