For many people the basement is a place of escape and for others it is simply a place for storage. With all the room underneath you, you don’t want it to go to waste. Renovating your basement can greatly increase the value of your home if it is unfinished or in need of an update. One important point to remember is the electrical wiring hiding behind the walls.

If you bought your home and it was already finished, that work could have been done many years ago and you might be thinking it is time to update fixtures, paint, and maybe evening moving a wall. When you begin pulling things apart, be careful for loose or old wires. If the electrical work was not done right, there could be loose electrical wires that were not tied in properly.  The wiring can also be old and out of date. If you are moving walls or replacing fixtures and you are worried about the age of the wiring, have a licenced electrician come to inspect your wiring. If you are going to go through the effort of redoing your basement you want to make sure it is done right.

For those who have an unfinished basement you have a clean slate to work from. Once you start putting up the framing for rooms, you can start on the electrical rough in. This is the foundation for the electrical wires, which includes drilling holes in the framing and running the wires to where they need to go. If this is not done correctly it could leave you with a significant headache once your drywall is up and you have to punch a hole in the brand new wall.

When you are planning out your new layout, make not of where each outlet, light switch, and light fixture will be placed. This will help you plan out the electrical rough-in. If you have reached this point in your basement renovation and don’t know where to go from there – contact Expert Electric. Our electricians can help you with the planning and running the wires through your basement.

Most electrical panels are located in the basement. Prior to your renovation, you probably could easily access the panel. When you are putting up framing and drywall, be sure to leave enough room around the panel for it to easily open. You also want to make sure not to cover it with furniture that could prevent you from accessing it quickly. In the event that you need to turn on a tripped breaker or even turn off a circuit in an emergency, you don’t want to be struggling with furniture to get the panel open.

Before you renovate your basement, have a plan and be prepared.

You Can Be Liable for Unlicensed Electrical Work

07/30/15

Revamping your home's electrical work can be a big headache. You need to find a qualified electrician and write what could be a hefty check for work that might require opening holes in your walls and temporarily making a mess of your home. The last thing you want after a big electrical project is to have to tear it all out and redo the job all over again. That could be the scenario you face, however, if you cut corners and don't hire a licensed electrician to take on the task. Fly-by-night contractors might be cheaper at the outset, but they can cost you big time in the end if they don't follow the local building code, leaving you liable for the faults in your home wiring.

Fanning the Building Code Fires

Some contractors might complain about having to follow local code, but it's in place for a reason – it helps ensure that any work done on your home is performed safely and effectively. Local code standards are particularly important when it comes to electrical work, because faulty wiring and connections can lead to short circuits or even an electrical fire, putting your family at risk.

That's why technicians who do electrical work are required to maintain a license, secure permits and schedule inspections for many home projects. Unfortunately, there are electricians who are tempted to skip the code requirements in order to avoid the time and expense of compliance. They might quote you a lower price, but shoddy workmanship can leave you on the hook for a lot more money overall.

Limit Your Exposure to Liability

If your local government figures out that you are working on an electrical project, they can send an inspector to check it out. If the work isn't up to code, you'll have to remedy the problem before you pass inspection. And if your electrician isn't licensed, you have little recourse to correct the faulty electrical work besides paying out of pocket for someone else to redo the entire thing. Worse, if your electrical system does cause a fire that leads to injury or death, you could be civilly liable for huge sums.

Licensed electricians, on the other hand, have more incentive to follow the rules to begin with, since they could lose their certification if they don't. Furthermore, you may have an easier time recouping your investment in the event of unsafe or incomplete work if you can prove that you did your due diligence and hired a licensed electrician.

Good Work Done Right

To avoid code and permitting issues, hire only licensed technicians for your electrical work and ask them to show you all the relevant permits. Protect yourself and your home by holding out for competent contractors so you know the work is done right the first time.

In my 27 years, I have heard these questions a lot: “Why is it so hard to find the top electrician for my electrical repairs? There are so many choices and my problem seems so easy, any electrician should be able to do it. Does it matter who I call? Aren’t all electricians the same? How do I find an expert electric man?” – Nick Shaeffer

The answer is no – not all Twitter, Google Plus.

A bit of mathematics at the end of the week. The

The first table shows three different installations. The old one is equipped with T8 fluorescent lamps that are at the end of their lifetime and dirty. That is why the luminous flux is so low for the 60W tube. In this situation, the need for a replacement is present. The choice is between a fluorescent tube, a LED tube or a completely new installation with controls. Controls reduce the average power consumption to 1/3 and less of the original load. We can estimate the new fixtures will consume 12W only when connected to controls that detect presence in the hall and reduce the lighting level in areas that are not in use. Each light point will be replaced. It is (often) possible to reduce the number of fixtures with a new installation. The example is concentrating on a one-by-one replacement to make it easier to understand.

The table above shows the sum of all costs for running and maintaining the installation each year and in total. The Retrofit Solution reaches an ROI after 2 years already. The New Installation with controls is going to turn back the high investment after 10 years. Both LED solutions do better than the conventional one, save energy and CO2 emissions. Let’s go green with LED light sources!

There are a number of times when homeowners take up DIY projects; not only do these help you save money, but many people find the idea of doing some of this work around their home, extremely fulfilling too. While it’s okay to do some carpentry or painting work, it’s best to leave electrical jobs to the experts; and there are a number of reasons for this.

Many people feel that they may be able to handle some basic electrical jobs themselves; but the fact is that electrical systems and installations can be quite complex and it’s not easy to tackle them. Apart from this, it’s required by law that you hire a licensed and insured electrician for any work on your residential or commercial premises. Take a look at how and why DIY electrical jobs can do a lot of harm:

There are a number of wire sizes available; this is called the gauge of the wire and this determines the application it’s going to be used in. If you accidently choose and install the wrong wire, this can cause it to heat up and the circuit breaker may trip. This is why it’s important to use wires and devices that are rated correctly for the amperage that’s required in a particular location.

If the switches and outlets have been installed loosely, that can present a hazard once the appliances have been plugged in. If the wires come loose from the terminals, that can result in overheating and arcing.

The reason for an electrical box installation is to provide the connections the right amount of protection from the external elements. This is also why it’s extremely important to ensure that no electrical connections are made outside these boxes. The other thing to keep in mind is that the electrical boxes should only be filled to a certain capacity. Adding too many wires and connections in a single box can result in overheating; in some cases, it can also result in short circuiting.

This happens to be one of the most common causes of electrical fires. When fuses keep tripping or blow, property owners may end up replacing them with breakers or fuses of a larger size. If a fuse trips very regularly, it’s first crucial to identify what is causing it to trip; that root problem has to be addressed by a licensed and insured electrician.

The connections inside the fuse box should all be tight and when they are replaced, the positioning should be right. In case the connections come loose, you might find the lights flickering or being cut short. In severe situations, there could be overheating of the connections too. The precaution to take here is that before you start with any inspection, you should first switch off the breakers.

This is one mistake that many people tend to make; they end up overloading the powerboard or the outlet. It’s important that you check how many amps a circuit can bear and then plug in only the type of appliances that aren’t going to overload the board. Appliances such as air conditioners, dishwashers and refrigerators etc. can overload the circuit, if it exceeds the amperage of the board .

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263