Becoming a licensed Colorado electrical contractor is not easy, and that’s the way it should be. Electrical systems—whether they are in a home or a large industrial facility—are both vital and potentially dangerous. Electricians need to be trained and skilled to ensure that these systems are installed correctly, functioning properly, and safely maintained; otherwise, serious problems may occur, which could lead to lost productivity or property. There are many companies who advertise electrical contracting services, but you don’t want your safety to be left in the hands of an amateur.

The Certification Process

There are three levels of licensure for electricians in the state of Colorado: residential wireman, journeyman electrician, and master electrician. Each level requires testing and many hours of verified on-the-job experience. In fact, the amount of time electricians must put in to be licensed may surprise you: *

PECI Goes Even Further

You Can Trust PECI

*from the Colorado Department of Regulatory Agencies

Many of us can forget about our households energy consumption in the mist of busy daily life.  However, for those who look a bit deeper into specific energy costs, families will be able to determine where their homes’ energy is going and can make adjustments to reduce their energy bills.

According to the U.S. Department of Energy, as much as 45% of your homes’ energy goes towards space heating. This means your heating, cooling, and air conditioning system is going to have a huge impact on your usage. Make sure you have checked your house for any leaks and that the appropriate insulation is installed or you will be losing heat that you have paid for.

Much of your other costs are coming from appliances and lighting. Lighting costs can be controlled by using energy efficient bulbs like LEDs. Make sure you are also turning off the lights in rooms you are not using. When running your appliances, try to use them only when you have full loads. It goes without saying that running the dishwasher or washing machine at half capacity will cost you more. If you can bundle more or wait for a larger load you can keep the number of times you are running your appliances down.

One way to determine your usage is to use an energy monitor. These types of devices cost around $30 to $40. They will let you know how much energy you are using to turn on and run these appliances or electronics. BC Hydro has also supplied a calculator you can use to estimate the cost per year. Sometimes upgrading your appliances can save you hundreds per year in efficiency.

One of the most affordable and effective components of any home security system is motion detecting outdoor lighting. Installed by a professional electrician, these lights can give you years of reliable service and peace of mind.

But like any part of your household electrical system, problems can arise from time to time. If your outdoor security lights are staying on all the time, not coming on at all or otherwise performing poorly, you can try these simple DIY fixes before calling an electrician.

Most motion detecting light fixtures allow the motion detector to be aimed at a specific area. If your lights are coming on too often, it could be that the sensor is aimed at a nearby street or an area where wildlife roam around at night. If the lights aren't coming on at all, the sensor might be aimed directly at the ground or into the side of the house. Experiment with different sensor positions after dark and walk around in the areas you want to secure to fine-tune your aim.

Motion detectors also typically come equipped with sensitivity settings. Too sensitive, and something as small as a fly could set it off. Not sensitive enough, and a prowler could come within a few feet of the fixture before it lights up. Locate this setting and fine-tune it to your liking.

Another common setting for motion detector lights is a light duration time. This can be as long as 30 minutes, and if your lights are unwittingly set this way, it could give the impression that they stay on all night. A good duration for most security light applications is one to two minutes.

A dirty sensor can’t detect movement properly. If dirt and dust have accumulated on your motion detector, use a wet rag to wipe it clean, then re-test your lights.

Security lights can get off-kilter if there are interruptions in the electrical supply, such as power outages, power surges and accidentally flipping light switches or breakers. Sometimes this can result in lights that stay on or off all the time. To reset most motion detecting lights, shut off the power supply at the switch for at least 30 seconds, making sure there’s no motion in front of the sensor during this time. Then turn the light back on and test it to ensure proper function. If there was motion in front of the sensor while the power was off, this may need to be repeated.

Not all motion detector problems can be fixed this easily. If you have persistent problems, storm damage or faulty installation, it’s important to call in your local licensed electricians for a professional evaluation and repair.