Surge protection can keep expensive electronics and appliances safe from Kauai’s common power surges.  During our storms, voltage spikes can be harmful to appliances and electrical devices in your home. An increase in voltage above an appliance’s normal operating voltage can cause an arc or high surge of electrical current within the appliance.  The heat created in the arc and/or the power pulse causes damage to the electronic circuit boards and other electrical components.

Example:

A customer’s  washing machine stopped working properly,  after having purchased it fourteen months ago from a major retailer on our island.  Were they covered under product’s warranty?  No.  That lasted for one year with no added extended service protection (which can cost about $400 more on top of the appliance floor price).  They called the retail store’s service man to come out and repair it.  Seven days and $230 dollars later, the small electronic part was replaced, back and running for the time being.  What caused the broken part?  Most likely a large power surge or a series of smaller surges that can break down the inner electronics–an appliance only fourteen months old!

What about your appliances or electronic equipment?    Are they protected from the next storm or outage?

Solution:

A surge protector…..Installing a whole building surge protector connected to your electric panel gives you that needed protection. It absorbs the spiked energy caused by these surges from our power lines or lightning strikes.  The surge suppressor Blue Sky provides, protects electronic devices from higher than needed voltage levels. It protects electronic devices (televisions and computers) and  appliances (washing machines and dryers) with electronic parts from surges that originate from within the home, from the utility service and from other wires that connect the devices to the outside, such as telephone and cable television connections.

Call us so you can protect your appliances and electronics from costly electrical surges.  Let’s not get too acquainted with the appliance repairman. Call: (808) 647-0599

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

It used to be that the moon and the stars were the brightest bulbs in the sky. But as anyone who’s flown across a city at night knows, these days, there are an awful lot of outdoor lights shining up from the ground.

Many people assume that an orange nighttime sky is just ugly, not harmful. But recently scientific studies have suggested that light pollution is more than an annoyance; it’s destroying wildlife, damaging human health and costing us a lot of extra money.

That’s why a growing number of cities and towns across the United States are drafting ordinances to try to bring the night sky back. They’re requiring that all new outdoor lighting fixtures that are installed – both commercial and residential – only shine light down onto the place that needs to be lit, not up into the atmosphere.

Known as the Dark Sky movement, these ordinances vary from town to town, but often the requirements are similar. No outdoor lighting fixtures can shine any light above a horizontal line. Instead, everything must shine down.

“We’re not saying you can’t have that aesthetic value, you just light it from the top down,” explains Johanna Duffek, Sections Coordinator with the International Dark Sky Association, a Tucson, AZ-based non-profit group that’s at the forefront of the movement.

Although the original purpose of The International Dark Sky Association was to keep the night sky pristine for astronomers, today the Dark Sky movement is gaining ground because more consumers are interested in reducing their energy usage, and when you’re not wasting light that’s going up into the sky, you can use a lower wattage bulb to achieve the same level of exterior lighting.

For example, if a homeowner used an outdoor sconce that had openings on the top and the bottom, he’d have to use a 100-watt bulb. But if he switches to a Dark Sky fixture that only allows light to shine from the bottom of the fixture, the homeowner could use a 40-watt bulb.

“It’s a more efficient use of light,” explains Tom Patterson, Director of Product Development at Hinkley Lighting, which already offers some Dark Sky light fixtures. “You can use a third of the wattage or half of the wattage and get the same amount of lumens.”

Patterson says consumer awareness of the Dark Sky movement is still very low, but he said awareness has been growing among local government leaders, and that is forcing the manufacturers to come out with more and more Dark Sky-friendly outdoor fixtures.

“Now in Arizona, in all the new construction, you’re going to have to meet the dark sky qualifications,” Patterson says. “It’s catching a little bit more momentum.” Hinkley, for example, advertises that it can make about 25 percent of its outdoor lighting fixtures Dark Sky compliant. Retailers are charged about $15 to $20 to change a regular fixture to a Dark Sky fixture.

Currently, there is no official government standard for a Dark Sky fixture, but the International Dark Sky Association has been in talks with the Department of Energy to incorporate the Dark Sky philosophy into the Energy Star program.

The International Dark Sky Association also independently evaluates fixtures from manufacturers and awards a seal of approval to all of those that meet its requirements.

So far, Duffek says the International Dark Sky Association has awarded Fixture Seals of Approval to 75 different lighting manufacturers, and while many of those have been commercial applications, Duffek says the organization is hoping to increase participation among residential lighting manufacturers.

Hubbardton Forge, for example, makes a sconce that has received the Dark Sky Fixture Seal of Approval that features a slate-colored ceramic shield around the light bulb that forces the light down. And the Minka Group has several outdoor lights with metal crowns that block the upward light.

Both Patterson and Duffek say the biggest resistance to Dark Sky fixtures isn’t coming from manufacturers but from homeowners who are afraid that less exterior lighting around their house will make them less safe.

But Duffek said homeowners need to understand that blocking light from going into the sky doesn’t mean blocking all exterior lighting. Duffek says the Dark Sky movement suggests homeowners buy outdoor lights with movement sensors that will go on if someone enters your yard, which can help alert you to danger and keep your energy usage down at the same time.

“When you keep the lighting on all the time, all you’re doing is lighting for the bad guys,” Duffek says.

Duffek says the biggest challenge now is to educate the public about the benefits of reducing light pollution and encouraging manufacturers to continue to design compliant fixtures.

“We always try to present it as a win, win, win solution,” she says.

It is that time of year again—the holidays are here and family is calling, the darkness falls early and our homes are starting to feel more like hibernation dens…. it is time to refresh our interior environment and get set for the winter months ahead.

Combat the oppressiveness that comes with the shorter days and decreased sunshine…bring in the light, uplifting accessories and comfortable décor to make your home or office space a more easeful and gratifying place to grow, work and dwell.

1.  Invest in the best lamps (bulbs) –instant on/off, quiet operation, dim ability and the most welcoming lighting effects are available in the latest energy-efficient LED, CFL and halogen light sources.

2.  Shaded fixtures—Dark Sky outdoor fixtures, as well as, decorative shades for indoor light fixtures make a huge difference in allowing for control and providing welcoming and soothing illumination.

3.  New LED reading lamps and desk lamps are designed to offer plentiful, focused illumination for the comfort and health of your eyes.

4.  Novel lighting controls and updated switches give you the utmost in convenience and energy-savings for all your lamps and light fixtures. In larger homes or offices, it is a good idea to install switches, novel  lighting controls and automated systems that may be digitally programmed and labeled.  This is also an energy-saver, as it limits the chances of you mistakenly turning on and off the wrong lamps and having to constantly think about which switch goes with which light.

5.  Work with the natural light streaming in through windows and skylights.  A couple of task lights and a single torch lamp may be all you need to provide comfort and illumination in rooms with generous windows and plentiful exposure to bright sunlight.

6.  Accessories such as comfy pillows and throws will not only dress up your seating areas and bedrooms, they are essential in blanketing your home with warmth both visually and functionally.

7.  Choose just the right occasional tables and whimsical furniture for form and function.  Look for dual-purpose accessories to make the most of your interior space.

8.  Candles, tea lights and mini portable lamps provide soothing illumination and create ambience for quiet relaxation and romantic lighting effects.

9.  Invest in LED night lights for hallways and bathrooms to supply energy-efficient security lighting and comfort.

10. Above all else:  Do not stress about getting everything done. Enjoy the decorating process and take your time to find just the items that help to define your space according to your specific needs and unique style.

The right illumination has been known to help us cultivate healthier habits whether it be eating more slowly or studying more intently.  Make it your intention this year to surround yourself in the right light.  Comfort is really the ultimate luxury and the right lighting is the key to comfort.

Satisfy your hunger for delectable design with novel accessories and light fixtures.  Visit a Capitol Lighting showroom or 1800lighting.com to view the latest in comfort and control for the most luxurious holiday season ever!

Since we covered outdoor lighting last time, this week we thought we would focus on lighting that you use more frequently. Everyone wants a house with good lighting. A bright house can fill you with energy or create a peaceful atmosphere. There are plenty of options out there for you if you are redoing your indoor lighting.

Pot lights are becoming a popular option in many homes over the last few years. Because pot lights are receded you can get a great “clean” look in any room. You can put many pot lights in one room without it looking busy or overwhelming. This also helps to give great light coverage from corner to corner.

In February we talked about adding a new chandelier to your home. This is a fantastic option for those with a big open space. A chandelier can bring the room together and look great. If you pick out the right one you can also add tons of light to a dark space. For those of you looking for something above and beyond this could be the right option.

Ceiling fans offer both functionality and aesthetics. We previously discussed the efficiencies’ of having a ceiling fan during the summer to keep your home cool. With a ceiling fan you can turn down your thermostat and let the fan regulate the air. Ceiling fans also come in a wide variety of styles, ensuring that there is one for every room. If you have an upper level room that is just getting too warm during the summer months, a ceiling fan is perfect for you.

Track lighting used to be bulky and unattractive. But the design has significantly improved over the years. Now you can find sleek designs with a combination of heads and lights. Track lighting allows you to focus the lights in the places that need it most. In a living room you can create a cool environment, or in a kitchen you can brighten up a workspace.

Each one of these lighting options can fit a different space. Take a look at your room and think about what works best for you.