Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

Do you think much about the electric outlets in your home? Odds are, probably not. But did you know that outdated outlets can lead to serious electrical problems, even including property loss and personal harm? The certified master electricians at Kolb Electric come to you today, bringing the things you need to know about the electric outlets in your home!

It’s important to understand that while you may not be seeing it, there are tons of things going on in your walls at all times. And beyond that, technology is always growing (at an alarming rate, in fact!), demanding more and more from your home in the way of electricity, compatibility and staying up to date. Older outlets can create a lot of potential harm, including:

An outlet upgrade project may seem like an inconvenience, but really it’s no trouble at all for a practiced electrician. The process is simple, takes little time, and prevents possible problems (it may even fix a few problems you didn’t know you had!). When it comes to upgrading, there are a few options you might consider, depending on your needs. Consider:

Thinking it might be time for an outlet upgrade? We think so too! Contact Kolb today for a professional solution for all of your electrical needs. Our certified electricians boast some of the greatest skill and expertise in the industry, and we would be proud to handle your outlet project!

To call this winter brutal in terms of snowfall would be a bit of an understatement. For those of us who have been in the Boston area for some time, we can only liken it to the blizzard we were pummeled by way back in ’78. While you may be enjoying a respite from the snowfall as we move slowly towards the spring season, it is important that you keep in mind the fact that all of this snow, including that on your roof, is going to melt.

When snow melts off of your roof, it can fill your gutters with water which then refreezes when the temperature drops back down. This can result in ice dams, which can lead to serious problems with your home, including roof leaks and damaged gutters. FB Electrical Services can help you to avoid issues with ice dams in Boston and the surrounding areas.

With the help of electrical resistance heating, you can melt the ice that would otherwise build up in your gutters, making it impossible for water to drain appropriately. Electrical coils can be installed beneath the roof and dip into your gutters in intervals, allowing for the heat from the coils to thoroughly melt any ice that builds up therein. When you melt this ice in the gutters, as well as that built up in a layer upon your roof, you can divert the water away from your home just as intended via your drainage system. This certainly beats having that water dripping into your home, damaging your roof and ceilings.

We had a call today from a customer. They were looking to retrofit their existing fixtures with LED. The competitor did a quote for them, and had recommended LED Post Tops as the retrofit bulb of choice for them. And this would have been a terrific solution if all their fixtures were acorn style pole mounted lights. But they weren’t, they were high bays, parking lot lights and show room lights. Yes. They are LED. Yes. They will save you money. But if you are trying to plow a field, you don’t buy a Porsche. You buy a tractor. The right vehicle for the job. And the same applies to LED.

First, let’s make sure we set the score right. We sell both. We sell LED Post Tops and we sell LED Retrofit Kits. We are not Post Top biased or Retrofit Kit biased. We even sell new fixtures. We have no biases! We want what is right for you!

contact our team and we’ll get back to you.