What’s more important than reliable access to electricity? Safe and reliable access to electricity! We use tools and appliances every day. Heck every hour. And in some instances, every minute. But generally speaking, we don’t really pay much mind to how safe we’re being with it. But you should. Accidents happen all the time (and if you like statistics, boy we’ve got ‘em right here!), and whether you think it could happen to you or not, the fact of the matter is we put ourselves at risk all the time.

This is why it is outright critical that we ensure we’re taking all of the steps we can to protect ourselves, our homes, and our loved ones. Luckily, safety isn’t all that hard, and really takes a minimal time investment. Here at Kolb Electric, your safety is the top priority to our Alexandria electricians. So take a moment to read up! You might learn something new.

Regarding Electrical Supply

First off, to use any appliance safely, you should always keep in mind the right places to use them relative to your home’s safe supply. We’re talking, of course, about dedicated circuits. We’ve spoken of them many times, but it’s important because ensuring the proper appliances get the proper setup is key to operating them safely. Appliances that should be on dedicated circuits include:

Also, if your appliance is going to be near water sources (kitchen/bathroom appliances), be sure they are plugged into a GFCI outlet. Don’t have GFCI outlets? Looks like it’s time for some installation!

Using Power Strips for Your Appliances

Don’t “daisy-chain”, be sure you’re using indoor for indoor, outdoor for outdoor, never cover your cords (generates dangerous heat), and don’t exceed the safe capacity. Also never use power strips or extension cords to power heaters or other high-wattage appliances. They weren’t designed to handle that much power, and they may overheat/catch on fire.

General Appliance Safety Tips from Our Alexandria Electricians

Rules of thumb that promote safety are a great idea, and our Alexandria electricians are here to give you the rundown!

Need the services of a certified electrician to beef up your home safety? From outlet installation to wire repair, our experts have you covered! Contact Kolb to learn about our services, or to set your appointment today!

Carbon monoxide is a gas which develops as a byproduct of the incomplete combustion of fossil fuels and wood. It is always generated when these fuels are consumed. However, it is supposed to be vented out of your home, along with any other gases from the system in question. When it isn’t, your health is in serious risk. Carbon monoxide is naturally odorless, colorless, and tasteless, which means that it is all but impossible to detect without the use of a good carbon monoxide detector. If you are exposed to enough carbon monoxide,  for a long enough stretch of time, then you may suffer serious illness, or even death.

Considering how dangerous a carbon monoxide leak can be, it is necessary that you have a carbon monoxide detector in place if you hope to live safely in your home. You need more than a great product, though; you need to know that your carbon monoxide detector is installed properly, and that it is ideally situated and expertly wired into your home. We’ll make sure that this is the case. Dial our number today if you have any questions about carbon monoxide, or the steps that you can take to protect yourself from its dangers.

For many people the basement is a place of escape and for others it is simply a place for storage. With all the room underneath you, you don’t want it to go to waste. Renovating your basement can greatly increase the value of your home if it is unfinished or in need of an update. One important point to remember is the electrical wiring hiding behind the walls.

If you bought your home and it was already finished, that work could have been done many years ago and you might be thinking it is time to update fixtures, paint, and maybe evening moving a wall. When you begin pulling things apart, be careful for loose or old wires. If the electrical work was not done right, there could be loose electrical wires that were not tied in properly.  The wiring can also be old and out of date. If you are moving walls or replacing fixtures and you are worried about the age of the wiring, have a licenced electrician come to inspect your wiring. If you are going to go through the effort of redoing your basement you want to make sure it is done right.

For those who have an unfinished basement you have a clean slate to work from. Once you start putting up the framing for rooms, you can start on the electrical rough in. This is the foundation for the electrical wires, which includes drilling holes in the framing and running the wires to where they need to go. If this is not done correctly it could leave you with a significant headache once your drywall is up and you have to punch a hole in the brand new wall.

When you are planning out your new layout, make not of where each outlet, light switch, and light fixture will be placed. This will help you plan out the electrical rough-in. If you have reached this point in your basement renovation and don’t know where to go from there – contact Expert Electric. Our electricians can help you with the planning and running the wires through your basement.

Most electrical panels are located in the basement. Prior to your renovation, you probably could easily access the panel. When you are putting up framing and drywall, be sure to leave enough room around the panel for it to easily open. You also want to make sure not to cover it with furniture that could prevent you from accessing it quickly. In the event that you need to turn on a tripped breaker or even turn off a circuit in an emergency, you don’t want to be struggling with furniture to get the panel open.

Before you renovate your basement, have a plan and be prepared.