If the bulbs in your fixtures aren’t easily replacable, you may need to buy new ones if you want to upgrade to more energy efficient lighting. Ultimately it will be worth the up-front investment either way, since you can save so much both in your energy bill and in replacement costs when you use LEDs or other similarly long-lasting solutions.

While some people like to own a house as soon as possible, it isn’t always practical. If you live in a rental, never fear! With just the right amount of ingenuity, you too can experience the joys of great lighting. Even if you aren’t allowed to tamper with the hardwiring, you can add more temporary fixtures such as battery operated puck lights under your kitchen cabinets or some really trendy plug-in lamps.

About 80% of dwellings were built before the year 1990. While they may have complied with the safety standards at the time of construction, those standards might not be relevant in today’s day and age. Significant changes were made in electrical standards since 1990 and the protection technologies of today were not available or required back then. You must ensure that the standards maintained in such existing accommodations are raised to the electrical safety levels of the current standards.

Understanding the Risks at Existing Accommodation

Extensive safety studies must be carried out in the existing residential buildings to determine the disparity between the required safety standards and the existing safety standards. If the existing standards fall a little short, you must show an urgency to raise the level of safety of these buildings and bring them up to the current standards.

Thankfully, it isn’t too complicated or difficult to do so. You can take small steps to gradually improve the electrical safety through a program of manual safety audits.

3 Ways Current Safety Standards Help in Reducing Electrical Risks

Importance of Verification

The current electrical standards ensure that the new residential electrical installations are safe and that they remain so over their entire lifetime. IEC 60364-6 defines both initial verification of an installation as well as verification of residential dwellings every 10 years. The periodic verification ensures that the fundamental protective measures remain active and reliable.

Recommended Periodic Auditing

There must be periodic auditing to ensure that the safety conditions are up to the mark. The audits need to be simple and based on visual checks. They need to be performed by a qualified auditor, who can then inform the owner of any possible safety issues. The owner will then take responsibility for arranging any necessary repair work. The frequency of inspection can be defined by each country, either by a specific period (e.g., 10 years), or triggered by an event such as the sale or rental of a dwelling.

If you find yourself making that frustrating trip to the circuit breaker often enough to remember, there’s a good chance your electrical panel is overworking itself. An outdated electrical panel is a hassle no homeowner should have to put with. It’s not just an issue of faulty outlets and tripping over extension cords. An outdated electrical panel is a serious fire hazard.

It’s outdated for one, and that can cause a lot of problems, especially for any home improvement projects. An electrical panel’s job is to determine how much electricity is distributed to all appliances, lights, and outlets in your home. If your electrical panel is outdated, not only is it unfit to meet your electrical needs, it puts you and your home at risk. An up-to-date electrical panel has a circuit breaker, which trips or turns off when the wiring is overworked; this prevents your electrical system from overheating and starting a fire. An outdated electrical panel isn’t only a fire hazard; it’s harmful for the following reasons.

If your home needs an electrical upgrade, it can be as simple as replacing a few circuit breakers or replacing the entire electrical panel. It’s best to contact an electrical technician as the wiring in your home is a complicated mess, and a professional knows what to look for. They can inspect your home and provide the best suggestions on how to upgrade your electrical system.

Electrical rewiring in Fairfax, VA may be the best decision you make this spring. After all, with the weather finally making the switch from snow and sleet to sun and heat, now is the time to start making some positive changes around your home. There’s no better way to start changing with the times than by improving your home’s electricity and with improved rewiring, you can live more comfortably in your home than ever before!

It’s important to remember while enjoying the summer weather, while outside or around the home, that there could be a variety of electrical hazards lingering. While not obvious at first, these issues could cause very serious (and potentially fatal) injury through electric shock. Our team at Expert Electric has created a list of common outdoor and indoor hazards to be aware of this summer.

Stay away from power lines with your body, toys, sticks, or anything an electrical current could travel down. Power lines transport extremely high voltage electrical energy. Venturing too close to a power line can create an opportunity for the electricity to flow to your body or object resulting in serious injury. If you see a fallen power line, call 911 immediately.

Ensure all your outdoor electrical receptacles around the exterior of your home or shed are covered, clean and dry. If water or dirt enters the outlet it can result in electrical surges and shocks when the outlet is next used. Receptacle covers can be purchased at most home renovation retail stores.

Keep all power cords, string lights and electrical devices away from ponds, swimming pools, hot tubs or sprinklers. Summer can lend itself to a lot of splashing and water flying through the air. If water comes into contact with an electrical device there is a high risk of electrical shock. Do your best to keep electrical devices at a distance from the pool and water fights.

Ensure that you have GFCI’s (ground fault circuit interrupter) outlets installed in certain areas of your home – namely rooms with running water mainly (bathroom, kitchen, garage, basement, pool rooms, etc.). These outlets can prevent electrical shock from happening with specially designed safety mechanisms.

In an emergency, know where your circuit breakers are and how to turn them off safely. When a panicked situation occurs, it can be easy to become confused and flustered. If you are knowledgeable interacting with your circuit breaker you will be more confident in the event of an emergency.

Before plugging in a fan, make sure that it is clean and there are no wires frayed or damaged. Occulting fans are often stored for most of the year. During storage power cords can become damaged and electrical wires exposed. Exposed wires leave you vulnerable to electrical shock when the fan is plugged in again.

Be sure to have any portable air conditioning units securely positioned and electrical cords tucked away. These are tripping hazards that can lead to either electrical shock or a heavy unit falling down. It’s also important to follow the manufacturers instructions on maintaining and servicing the unit to prevent damage to the home’s electrical system and personal injury.

It is important to be aware of potential electrical hazards in order to identify and avoid them. Our team of trained and licensed electricians are happy to help you ensure your home and family are safe from electrical hazards. If you would like more information on electrical safety tips to be aware of during the summer or general, contact Expert Electric today at 604-681- 8338.