You only need to type a few words into a search engine to pull up numerous DIY guides for repairing and replacing electrical lighting outlets in your home. Just grab a screwdriver, pliers, and wire cutters and you’re set.

But hold on—do you really know what you’re doing? These DIY guides can be notoriously sketchy, and some depend on you knowing far more about electrical repair than you probably do. Because of the risk of electrical shock and bad wiring that can lead to fires, you should leave the outlet repairs to trained electricians. Outlet shorts and faults are a common cause for household fires (the Electrical Safety Foundation estimates electrical troubles account for 55,000 fires a year), so you should never take such chances.

Capitol Lighting created a friendly competition challenging local designers to create one-of-a-kind bathroom spaces and put a call out to all Northern New Jersey-area interior designers to participate. Two top designers were chosen out of numerous applicants to compete in the unique challenge of remodeling the men’s and women’s bathrooms at the company’s Paramus showroom — one of which will be crowned the “Thronedown” champion. The finalists were chosen based on previous work and have been given a $2,000 project budget with lighting supplied by Quoizel and Feiss.

Anna Maria Mannarino- Mannarino Designs, Inc.

5-pin SPDT (single pole, double throw) automotive relay.

Relays are essentially two parts in one package. The first part is an inductive coil (pins 85 and 86). This coil is the “trigger” function of the relay. By applying both a positive (+) and ground (-) to the contacts, current passes through the coil. When current passes through the coil, a magnetic field is generated and moves the switch (the arrow in the diagram). This is where the second part of the relay comes into play.

The second part of the relay is the “switch.” The switch has three interface contacts—common, normally closed, and normally open. “Normally” refers to the state of the relay not being energized.

While relays can be used for virtually any task, there are some very useful, simple applications for adding LED lighting to a vehicle. Please note that this wiring only pertains to the relay—not the wires in the vehicle. Before interfacing with a wire in a vehicle, always ensure you test the wire with a digital multimeter first to confirm circuit function.

Positive Switching

Positive switching is used for applications where the “trigger” for your switch or circuit is positive. This could be an ignition, brake, or reverse light wire for example.  This could be used for applications such as off-road light bars, work lights, additional brake lights, and other exterior lighting.

Negative Switching

Negative switching is used for applications where the “trigger” for your switch or circuit is negative. Negative triggers are often found in door, hatch, and trunk triggers as well as many interior switches. This could be used for applications such as footwell lighting, truck bed lighting, under-hood lighting, and other interior lighting.

Switch Activated With Ignition Override

This is useful for applications where you want to turn your light on or off with a switch but only want the light to remain on when the car is running or key is in the “ignition” position. The main advantage to this is—even if the switch is left on—the light (or output circuit) will shut off when the key is turned off so that the battery will not be run down.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Pool lighting is one of the most impressive outdoor lighting projects you can take on and can totally change the look and feel of your backyard. Pool lighting is also a great way to show off your creativity, and your lighting system can be customized to create any mood you can think of. The following are some of the best pool lighting tips we’ve found, but don’t be afraid to think outside the box!

Some people may be used to having only one light at the deep end of the pool and a few at the shallow end. While this is certainly an option, it’s not a hard rule! Try adding more light throughout until you get the effect you want.

If you have a sitting area on one side of the pool, make sure you point your pool lights away from it. Pool lights tend to be especially bright, so they should be installed facing opposite where people might be sitting.

Using too few lights, or having lights that only face one direction, can create shadows that highlight flaws in your pool’s liner or surface. Shining lights from multiple directions will eliminate these shadows and make the bottom of your pool look flawless.

The color of your pool liner will make a dramatic impact on how the pool looks, day and night. Light colors reflect light and dark colors absorb it, so go light if you want your pool to look bright and exciting at night and choose dark if you want a more subdued landscape.

Pool lighting is one of those projects that many people either put off or try to cut corners on. But if you want a pool that you can really get a lot out of, we recommend spending the extra money. Even though the upfront costs may be higher, you’ll be able to enjoy your investment for years to come.

Back in April, a young boy in South Florida was electrocuted by a faulty pool light while swimming in his family’s pool. Reportedly, the light had been fixed by a contractor the year prior.

While incidents like this are exceedingly rare, we want to use this as an example of why you should always work with an electrical company you can trust. Lighting isn’t the only danger zone in the pool—other potential hazards include:

At Kolb Electric, your safety is our highest priority. We will acquire all necessary permits prior to your pool wiring job, then finish off with a detailed inspection so you can enjoy your pool or hot tub without having to worry. We also recommend having your pool’s electrical system inspected once a year.

The Consumer Product Safety Commission has a detailed list of pool safety tips to prevent electrocution:

If you’re thinking about installing pool lighting in Maryland, Virginia, or Washington, DC, call Kolb Electric! We can design a beautiful, long-lasting, and safe pool lighting system that you can enjoy for years.