Zinsco or GTE-Sylvania panels were incredibly popular during the 70s. Despite Zinsco no longer being around today, many homes still have these panels inside. The circuit breaker in these panels can melt to the main bus bar, hindering the breaker’s ability to trip when it needs to. If there is a short circuit, the wires can melt and cause a fire. Not all Zinsco panels are at risk, so have an electrician look at yours if your home has one.

Federal Pacific Electric panels are extremely unsafe, despite being installed into millions of homes throughout the 50s to 80s. These panels’ circuit breakers fail to trip when there is a circuit overload or short circuit. If a panel’s circuit breaker doesn’t trip when it’s supposed to, it can lead to an electrical fire in your home. If your breaker box has “Federal Pacific Electric” written on the front and “Stab-Lok” branded on the inside of the panel, your home could be at risk.

Fuses boxes are not inherently dangerous. In fact, many homes have fuse boxes and are not at risk. The risk with fuses comes from using them in an unsafe way to serve today’s energy demands. By placing too many things on a single circuit, replacing a fuse with a bigger fuse, or replacing the fuse with something metal creates a potential fire hazard.

Again, these kinds of panels are not dangerous by themselves. What makes them dangerous is the fact that they haven’t been used for over 40 years. If your home has a split-bus electrical panel, it could be past its expected lifespan. The circuit breakers may not trip as they are designed to.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Every year, we see dozens of do-it-yourself jobs go horribly wrong. While our trained and certified electricians can fix the issue, the property owner who tried (and failed) to do the job in the first place probably made it worse. Even if that supposedly simple job sounds easy and you find yourself reasonably handy, you should never attempt to do it yourself. Here are three reasons why you should always hire a professional.

The first and perhaps most serious risk associated with DIY work is injury. Electricity is no joking matter—it’s a powerful force with the ability to change your life in a sheer instant. The current that’s flowing through your walls has the ability to seriously injure you in a split second, and could even kill you in serious situations. You should never take working with electricity lightly, and you shouldn’t even attempt to work with it unless you’ve had extensive training and know how to do so properly.

We hear of too many people who are injured while trying to work with electricity and they fail to notice a hazard or are unaware of a potential problem. Our technicians have all been trained through years of education, practical application, and apprenticeship in order to become a certified electrician. We know how to properly handle electricity and can do so with minimal injury risk.

Are you trying to install a new appliance you just purchased? What about something larger, such as installing a ceiling fan or changing over to recessed lighting? These are all things you should trust to a professional. Not only can a professional do so quickly and cleanly to avoid the mess often caused by a lack of experience, but you can avoid potentially damaging your new purchase as well.

Lack of experience frequently can melt the wires or overload circuits through improper installation, which can ruin your brand new device, and may even void the warranty on it in some situations. If you want your new home appliance installed correctly, trust a professional to do it right the first time.

Hundreds of fires are started by faults in electrical systems every year, such as shoddy connections, low-gauge wire choice, or even loose wires left dangling. These are not only against code, but extremely dangerous and could spark at any moment. Sparks cause fire, which will damage your home considerably. A professional Marietta electrician is well-versed in the ever-changing electrical code rulebook and can do the job you need while adhering to these rules and minimizing your fire risk.

Did you know that proper surge protection could help avoid short circuits and fire hazards?  In fact, using up-to-date surge protectors (suppressors) for your appliances, or even your entire house, could save you thousands of dollars in property damage. These are just a few reasons why surge protection should be of the utmost importance for you and your home this holiday season.

What are power surges?

First, before diving deeper into the different advantages of protecting your home against power surges, it’s important to understand what electrical surges are, and why they’re such a concern. An electrical surge, also known as a “voltage surge”, is an electrical disturbance that can be caused by a variety of spikes in voltage. More specifically, these surges are usually caused by lightning strikes, power outages, short circuits, or tripped circuit breakers. Problems occur when these short spikes in electrical power overload circuits in home appliances and other electronics.

Why is it so important to protect your home against power surges?

For starters, power surges can be very dangerous for you, your family, and your house. Surges are one of the most common causes of house fires, usually resulting from a combination of faulty wiring and irresponsible electronics hook-up by homeowners. This is especially apparent around the holidays.

According to the Cheltenham Fire Department, “when putting up holiday lighting, surge protectors should be used instead of relying on extension cords.” Now, more than ever, people should be cautious about electrical disturbances and the possible danger they pose to their electronics—and even more importantly—their lives.

Even if a power surge doesn’t turn out to be dangerous, it can still be very costly.  As a matter of fact, power surges can pack enough of a punch to short the power supply in a desktop computer, television set, or even a microwave. Basically, anything with internal electronic circuits can be affected by a voltage surge.  That’s why it’s imperative that everyone use surge protectors for each and every appliance in their home.  At the very minimum, one should consider whole-house surge protection, or even just safeguarding higher-priced appliances such as LCD Televisions, microwaves, and desktop computers.

The Benefits of Power Conditioning and how controlled voltage delivery could save you money

Aside from protecting your home from voltage surges, you should also consider the amount of energy that is wasted from many of your appliances. And remember that with wasted energy comes wasted money.

One money-saving solution may be installing power conditioners in your home. Simply put, a power conditioner is a device that delivers clean (steady) power to your devices. It is designed to distribute a stabilized and continuous voltage level which eliminates dips and line static—important for all of you who own surround sound systems in your home theater.

As a consumer, it’s important to be informed about devices and services that can save you money, improve the longevity of your investments (e.g., Flat-panel television, etc.), and even protect your home.

If you have any more questions about power surging, or if you decide that you would like to look into protecting your home against electrical surges, contact our helpful team at ElectricMan Inc. We are here 24-hours a day, 7 days a week to serve you.