Now that the weather is warming up, you'll have more time to get those household jobs you've likely been putting off done. There'll likely be lots of trips to the hardware store, power tools, shouts of victory and the occasional groan of defeat along the way as you undergo a renovation. Before you launch into your summer projects here are a few tips to make sure you have a productive home improvement season.

Do your homework

Research your project before you start by finding stories and reading product reviews. Doing your due diligence on a job before you even pull out a tape measure will help to prepare yourself mentally.

Stick to the plan

Before you start knocking down, peeling off, unscrewing or disconnecting, make sure you have a clear plan of what you want to do and how you want to achieve it. The last thing you want is to turn a two hour job into two day patch-up.

Measure twice, cut once

Not being meticulous about your measurements often leads to "an inch off here" or "an inch to much there," which is all you need to ruin a great day's work.  Making sure you get the right size pipes, joints and parts the first time you go will save you multiple trips to the hardware store.

Get the right tool

Much like the previous point, using the wrong tool can lead to you undoing your hard work. We've all been tempted to jury rig something that's "close enough" to what we want, but that sometimes turns out to be not just unwise but also unsafe.

Have a backup plan

Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

             In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!

For the average homeowner, electrical panels are not very well understood. Since the job of an electrical panel is to deliver electricity, the common assumption is that if you need more electricity to support your household, you should just be able to add more circuits. This is incorrect, though.

This is only part of your electrical panel’s job. It also acts as a safety device, channeling the electrical flow into circuits so your home gets the amount of electricity that’s allowed by the panel. If your home doesn’t have enough electricity, then it’s time to upgrade your electrical panel, but how do you know when this time has come?

Have you noticed any lights in your home that flicker, dim, or brown out when you turn on major appliances such as your dishwasher or microwave? This is a sign that the draw on your system is too strong, and that you would benefit from adding more amps to your electrical box.

If you have multiple circuit breakers that trip on a regular basis, this is probably a sign that you don’t have enough power coming into your home. If you’re constantly flipping circuit breakers back on in your electrical panel, you could very well need an upgrade.

This is actually an outdated method of managing the electricity in your home. In fact, it can be downright dangerous. Many homeowner’s insurance companies won’t even insure homes that still have fuse boxes instead of an electrical panel. Fuses simply can’t provide the amount of power that the average home needs. The best thing you can do is upgrade your fuse box to a standard electrical panel as soon as possible.

just 15 years ago. I wonder if any of the attendees at COMDEX thought to themselves “One day, I can cook my steak with the help of a tiny glowing tool that changes colors when my meat is cooked to perfection.” Probably not. Thankfully Sharper Image did, so now you can cook your steak and monitor it from your smart phone.