GFCI stands for ground fault circuit interrupters. This specific type of outlet can help prevent most electrocutions, and are even required in homes near sinks such as those in the kitchen or bathroom. GFCI outlets measure the current flowing out of the outlet and back. If the values vary, even slightly, the outlet with shut down any transfer of electricity. This has saved thousands of lives over the last 40 years. It’s very easy and quick to have an electrician go through your home and replace standard outlets with life-saving GFCI outlets.

If you’ve ever had children, you know how important outlet covers are in the home. While they may not be necessary all the time in a home with only adults, there are many other reasons besides children that these covers come in handy. Outlet covers are simply pieces of plastic that fit into outlets to protect anything from making contact with the available electric current. These covers protect children from putting their fingers in outlets, dogs and cats from licking them, and help prevent the rare accident as well. Pick some up at your local hardware store.

If you’ve ever opened up a light switch panel, you’ve probably seen simple situations that have three wires. One wire is the hot wire which carries electricity to the outlet. The other hot wire is only hot when the switch is activated and carries the electricity to a light or appliance. The third wire is the ground wire. More often than not, especially in older houses, this third ground wire may not be attached to anything. It’s important to make sure this ground wire is properly installed to the switch to avoid things shorting out or electrical fires.

Perhaps your house was originally built without air conditioning or you have added a full laundry room onto your home that wasn’t there when the house was built. If that’s the case, you may have outgrown your home’s electrical panel without realizing it. Adding high energy use appliances can easy place an extra toll on your electrical panel. The best way to know this is if your lights flicker when you start an appliance or you have a breaker regularly flip. It’s time to call an electrician if you think this may be the case.

Insect Vision: Ultraviolet, Color, and LED Light, Marianne Shockley Cruz and Rebecca Lindner from the University of Georgia’s Department of Entomology write, “Experimental work supports the idea that color perception exists in insects and that they are especially responsive to the shorter wavelengths of the visible spectrum and UV light.” Wavelengths are measured in nanometers, and shorter wavelengths of light (less than 550 nanometers) can indicate ultraviolet (UV), blue, or green colors. Cruz and Lindner also cite work that confirms the correlation between UV light from the sun and moon and how certain bugs navigate Earth. Another point to remember about bugs is that certain types, such as mosquitoes, are attracted to heat and have thermal receptors to help them find it. All of this information is helpful for determining why bugs flock to certain light sources.

The color that is emitted from a light source is important because of its ability to attract bugs. As previously stated, shorter wavelengths (UV, blue, and green light) are more visible to bugs than longer wavelengths (yellow, orange, and red light) and, therefore, will draw them closer. Incandescent, compact fluorescent (CFL), halogen, and high-intensity discharge (HID) lights emit UV radiation that is attractive to bugs, and since certain types of bugs navigate by UV light from the sun and moon, a closer, brighter source of UV light can disrupt their orientation and draw them in. LEDs produce very little to no UV light, which makes them less visible to bugs. However, it is still possible for an LED bulb to produce shorter wavelengths of light (bluish-white/cool white color), which will be more attractive to bugs. Therefore, when browsing for LED lights that will attract less bugs, it’s important to choose a fixture that emits more wavelengths that are above 550 nanometers, such as warm white, ultra warm white, or yellow lights.

CCT) instead of nanometers, it’s easy to tell if the bulb will be more or less visible to bugs. CCT is measured in Kelvin (K), and different temperatures on the Kelvin scale represent different colors. An LED bulb with a CCT below 3600K will emit warm or ultra warm white light that’s not easily seen by bugs. Bulbs with CCTs of 3600K and above will emit natural or cool white light that is more likely to attract bugs.

Incandescent, halogen, CFL, and HID bulbs waste most of the energy they consume—as much as 90 percent—in the form of heat. Bugs with thermal receptors can sense the heat released by these light sources. LED bulbs produce a minuscule amount of heat, which makes them less appealing to bugs.

Bug lights are simply light bulbs with a yellow coating that decreases the color temperature of emitted light. Because of the coating, bulbs will emit a peak wavelength of light that is around 550-600 nanometers. However, you don’t need a yellow-coated bulb to reduce the presence of bugs. LED lights that emit warm-colored illumination, such as yellow malibu light bulbs for landscape applications, or From top left to bottom right: incandescent bug light, yellow LED strip lights, yellow LED malibu light bulb installed in landscape fixture, and gold-tint LED filament bulbs

Ecologist Michael Justice performed an experiment to determine the type of residential light that attracts the least amount of bugs. He used six lighting types inside of an insect trap each night during the summer. Justice also made efforts to equalize the effects of weather and the moon’s irradiance. His LED Z-Bug Bulb™ from NEBO is a bug zapper and an LED bulb in one. The bulb emits white illumination from its top and ultraviolet (UV) light from its caged center. The UV light attracts mosquitoes and other insects toward the bulb’s high-voltage electric grid and kills them on contact.

Because different types of bugs see different wavelengths, it is never guaranteed that an LED light won’t attract them. However, most bugs are attracted to short wavelengths of light and are especially drawn to UV light; they can see it better, and some use it for navigation. Bulbs that emit more short wavelengths of light (cool white/bluish color) will attract more bugs. Lights that emit a majority of longer wavelengths (yellow/orange/red colors) are less visible. Heat can also draw bugs into an area. LED lights produce little to no UV light and a minuscule amount heat, which makes them less attractive to bugs—so long as they emit longer wavelengths of light.

Hi Nick,

Mike and I just wanted to thank you and Rick for the excellent service yesterday, a Sunday during a major power outage at that.  From the time I placed the call for help to the time Rick walked out of our soon-to-be-warm-again home, it was only an unbelievable 1.5 hrs!!  I so appreciate your ‘straight-shooting’ with me on the phone about whether our problem could be Oncor related or in our wiring and the option to switch our dead furnace thermostat to the one working leg of power we seemed to have.  Rick arrived just when he said he would, went right to work and determined that we were indeed receiving full power from Oncor, but one of our breakers was bad.  He replaced it, checked things out and was on his way.

You have impressed us with your quality of service.  We certainly will use you again and recommend you when someone asks if we know a good electrician….we do now!

Are you looking for energy saving tips to help your business reduce annual energy costs? Businesses consume far more lighting energy than homes, so if you’re looking for a simple and cost-effective place to start, addressing your business’s lighting solutions offers ample opportunity.

“Out with the old” should be your mantra here. Incandescent light bulbs are far from efficient, emitting 90 percent of energy as heat – not light.

The curly cousin of long-tube fluorescents, CFLs can be used in place of incandescents in standard light sockets. They contain mercury and should be handled with care; however, they use 75 percent less energy and last 10 times longer than incandescents.

Lasting 25 times longer than incandescents and using 75-80 percent less energy, LED lighting options have recently come down significantly in price. To get the most bang for your energy buck, LEDs are a top choice.

High intensity discharge lights are extremely efficient at producing large quantities of very bright light and are an excellent choice for warehouse and commercial settings. Be sure to talk to an electrician to get the best color spectrum to suit your needs.

Using 1/5 to 1/3 the energy as incandescents and lasting 10 times longer, these fluorescents offer flexibility in various commercial settings.

Twice as efficient as incandescents, halogens produce a very bright white light that is well-suited for outdoor applications such as security and stadium lighting.

Light dimmers and timers deliver just the right amount of light just when you need it, reducing energy use and costs. They also improve security while you are away and can enhance the functionality and ambiance of your business.

The future of lighting, we’re not talking battery-operated, but fully automated lighting powered by remote control and smart device applications. The technology of this solution offers you the capability to monitor usage and costs, with the added convenience of on-site and remote functionality.

Mr. Electric® will perform a complimentary evaluation of your current setup, analyzing for efficiency and function and offering lighting options that can lower your operating costs significantly.

Designed to your specifications, our experts can design custom lighting solutions that perform well and look great – all while keeping energy costs under control.

Security, landscaping, parking, retail – you name it! Whatever your lighting needs, Mr. Electric will spotlight your perfect solution.

Schedule a commercial electric energy audit today. A commercial energy audit can offer even more energy savings tips for the benefit of your bottom line. Mr. Electric can:

Don’t let excess energy costs drag your business down, get the energy saving tips you need with the help of Mr. Electric today!