Saving on electricity is always the smart way to go, and you’ll find that you can keep monthly bills way down if you just do a few smart things to cut back on your electric power consumption:

Use Fans instead of AC – Winters in Texas may be warm, but the summers are comparable to sitting in the desert. You’ll find that using your AC is the only thing keeping you alive, so the thought of turning them down may be making you sweat. Turn down the AC a few degrees, and turn on some fans around the house. The breeze will cool off the home, and it will blow the cool air around nicely.

Switch Out Light Bulbs – One great way to save on electricity around your home is to use energy saving bulbs. An 18W power saver will produce as much light as a 60W regular bulb, but only use 18W. It will be a steep initial investment to replace all of the light bulbs – the power saver ones are costly – but it will cut your electric bill dramatically.

Use Power Strips – Your TV, DVD player, radio, Xbox, and other devices all use power when they’re turned off, as they’re in standby mode. You should consider plugging all of these devices into a power strip, and just turn off the power strip at night. It will cut down the amount of energy that’s used, and you’ll never know the difference.

Reduce Appliances — Do you really need a toaster, microwave, dishwasher, blender, food processor, juicer, two coffee machines, an espresso maker, and a coffee grinder? You probably need some of these appliances, but you can probably eliminate a few of the ones mentioned above. Use more gas-powered appliances, as gas is cheaper than electricity.

Replace Old Appliances – Did you know that older appliances tend to use a lot more electricity than newer ones? Newer appliances are made according to Energy Star regulations and standards, so they’ll be cheaper in terms of energy consumption. Replacing them will cost you a bit, but you’ll recoup your investment within a year or two.

Turn Down the Heater – If you are using an electric boiler to heat your water, chances are you’ve got it set too high. You probably want to enjoy a nice shower in scalding water, but most people have to turn on the cold water when they shower. If you want to save on electricity, turn down the heater until it’s just nicely hot instead of scalding. You won’t have to turn on the cold water to shower, and you’ll still be able to enjoy a nice hot shower!

Saving electricity isn’t just smart – it’s cost-effective and wallet-friendly as well!

It might be tempting to save money by doing the job yourself, but only a licensed electrician should attempt an electrical panel change out. The panel is a critical part of your home’s electrical system, as it supplies the electricity that powers the entire structure. As such, changing one out is a very complicated process, one which should only be undertaken by a professional. Electrical work is always dangerous, and an electrical panel change out is even more so. In fact, in some cities, it is illegal for anyone other than a professional to attempt it.

Modern demands for electricity often exceed what the original builders of your home envisioned. It’s not unusual for older rooms, even kitchens, to have just one or two electric outlets, but that can put an unsafe strain on your wiring system.

In addition, older homes (those 50 years or older) may have outdated aluminum and/or knob and tube wiring. If you frequently trip the circuit breakers in your home and/or notice discoloring around the outlets, this could be a sign that your wiring needs to be replaced. Old wiring is nothing to ignore. More than 26,000 residential fires are caused by electrical system failures each year.

If you suspect the wiring in your home may need updating, you are likely wondering about the cost to rewire a house. According to Angie’s List, the average cost of rewiring a 1,500 to 3,000-square foot home ranges from $8,000 to $15,000. The good news is that this is a one-time expense. Unlike replacing your roof or heating system, it’s extremely unlikely you’ll need to replace the wiring again for as long as you live in the house.

There are many factors that contribute to the cost to rewire a home in the Maryland, Northern Virginia, and Washington, DC areas. They include:

At Kolb Electric, we understand that the cost to rewire a house can be substantial. That’s why we take the time to answer all of your questions and address your concerns before we ever start work on the project. We’ve been helping Maryland, Northern Virginia, and Washington, DC area homeowners with their electrical needs for more than 20 years, and our team of licensed electricians are some of the best and well-trained in the region.

To learn more about rewiring your home and/or to schedule an appointment in the DC area, call us at 877 287-1179.

If you’re considering the purchase of an electric car, good for you! You're doing your part to reduce the nation's reliance on oil and cut down on fossil fuel emissions, and you get to drive around in style to boot. But with many newer models, you’ll need to set up a charging station in your own home garage. Public charging stations are not widely available, and nothing beats the convenience of having a power source right outside your door. With an electrician's help, you can install a charging station on your property and get your car up to speed quickly. Read on for some tips on how to get started.

Expand Your Range

New, affordable electric cars (those that cost around $30,000) top out at ranges between 60 and 90 miles before they need to be recharged. That doesn't do you much good for a cross-country road trip, but it should be more than enough for the average daily commute. If you can plug it in overnight, you should be good to go the next day.

Technically speaking, the charger for an electric vehicle is found in the car itself, and the box you install to provide the electricity is called the Electric Vehicle Service Equipment (EVSE). The EVSE puts out 240-volt alternating current, and the charger in the car converts it to direct current to replenish the battery. Note that you can plug into a standard 110 volt outlet for some cars, but it will take 18 hours or more to fully charge them, making it impractical for daily use.

Pick Your Charging Spot

An EVSE can cost anywhere from $500 to $1000 or more, depending on what model you need, plus installation fees. More expensive models have higher amp ratings and can charge the car faster, generally speaking – some can get you ready to go in as little as three hours. The box needs to be placed within 15-25 feet of where you park your car so you can reach it with the charging cable.

Before you start the installation process, have an electrician evaluate the state of your wiring and circuit box – some older homes may not be able to handle charging a car without a significant electrical system upgrade. If everything checks out, the electrician can hardwire the EVSE or, alternatively, install a 240 volt outlet, similar to what you use for an electric oven or clothes dryer. The second option gives you more flexibility to move your charging station in the future, although outdoor installations usually require hardwiring.

The Code of an Electrician

To read up on the specific rules about how the EVSE needs to be installed, check out National Electrical Code Article 625 – your local building code likely has the same or similar regulations. For more help evaluating the suitability of your home for an electric car charging station, contact a local electrician today.