Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

The celebration continues! Pegasus Lighting is 15 this year, and to commemorate our anniversary we’re creating monthly blog posts about popular culture 15 years ago. You know, just to remember where we came from. July 1999 was a tumultuous month. There were some inspirational moments, tragic moments, and just plain bizarre moments, like when we intentionally crashed a spacecraft into the moon. Enjoy this walk down memory lane. Don’t forget your baggy pants, hair gel, and Christina Aguilera CDs.

1. Moon Boom

via Wikipedia

Mercury-Redstone 4, the second U.S. spaceflight, which launched in July 1961, resulted in the near-death of astronaut Virgil I. Grissom and the sinking of the Liberty Bell 7 spacecraft. The vessel was rescued from the depths of the Atlantic in July 1999.

 3. Lance Does a Victory Dance (Possibly Drug-Induced)

Good old Lance Armstrong of LIVESTRONG and doping fame won his first Tour de France in July 1999. It was the beginning of an Armstrong era that would later be tainted by the fact that Armstrong was doing unethical things to give him the edge to win. Live Strong? Even if it means cheating? Thanks a lot, Lance. Great role model. Pshh.

4. Crash in Martha’s Vineyard

Off the coast of Martha’s Vineyard, a plane piloted by John F. Kennedy Jr. crashed, killing him and his wife Caroyln Bessette Kennedy and her sister Lauren Bessette. Very sad. Sorry for depressing you. But this is what was – phew! – I almost said “This is what was going down.” That would have been indelicate phrasing. This is what was HAPPENING in July 1999.

5. HARRY POTTAH!

In July 1999, the third novel in the HARRY POTTER series, HARRY POTTER AND THE PRISONER OF AZKABAN, was published in the UK. It sold 68,000 copies in the first three days and won a bunch of prestigious literary awards. Cha-ching!

6. A Blur of a Man

In a bizarre event, a Japanese man named Yuji Nishizawa hijacked an All Nippon Airways Boeing 747 and stabbed one of the pilots with a 8″ kitchen knife before being subdued by the crew. The pilot died shortly after the emergency landing, and the perpetrator was apprehended. Because he was diagnosed with mental illness, he was given a sentence of life in prison. Weirdly, he had discovered a way to smuggle weapons on planes, and, shortly before the incident, he had written to the airline alerting them to the security flaw and asking for a job in airport security. No one listened, until the hijacking. Then, the security flaw was fixed in all Japanese airports. Some people, man. Makes you want to go back in time and slap some sense into him.

8. Woodstock Again… Again

They tried to recreate the Woodstock music festival in 1994. What happened? Violence and destruction. So they figured, hey! Let’s give it another go! So, in July 1999, Woodstock 99 was held in Rome, NY. What happened? Violence and destruction. And sexual assault. Sorry Limp Bizkit fans, this is not going to work out. There were no more Woodstocks. (Or Limp Bizkit fans, incidentally.)

9. Andre Is Wimble DONE!

On the Fourth of July, in Wimbledon, England, under a blazing sun, Pete Sampras and Andre Agassi were battling it on the grass out for glory and riches. And a real big trophy. Pete Sampras defeated Agassi in three sets and called the match the “best tennis of [his] life.”

10. It’s Electric! (I know. Sorry.)

Florida commits its last act of execution by electric chair. The convict? Allen Lee Davis. I won’t go into detail about his heinous crimes. Or his execution. But it was shocking enough – oops I did it again! – I mean APPALLING enough for death by electric chair to be considered cruel and unusual punishment from then on in the state of Florida.

11. Hello Safeco

The inaugural baseball game was held at the Seattle Mariners’ Safeco Field in July, 1999. The field looked great. But the Mariners lost to the San Diego Padres, 2-3. Womp womp.

12. American Why? Just Why?

Stanley Kubrick’s latest film EYES WIDE SHUT was released in the middle of the month. Mask party, anyone?

14. Teenie Genie in a Bottle

It can be difficult to find a Dallas electrician who will do their work the right way to make it worth the money to hire them.  However, if you can find the right man to get the job done, you will surely do business there again and again.  What are the most important qualities of an electrician?  There are certain things that customers look for in a company before hiring them, here’s a great list of items to help you in choosing an electrician, but perhaps the most important characteristic of a reputable Dallas electrician is customer service.

There are several factors that customers look for when determining good customer service.  After all, since no one wants to hire a Dallas electrician unless they can provide high quality service, it is worth doing a little research to find out who can truly deliver before hiring one company or another.

If you are interested in only working with a trustworthy, reputable Dallas electrician, visit www.electricmaninc.com to learn more about a fine company operating out of the Dallas area.