The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

If you aren’t sure about whether your electrical system has the right grounding, its best to call in a reliable local electrician to get it checked thoroughly. We at AllRound Electrical will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

Summer colors are abloom with table and floor lamps, wall lights, ceiling light fixtures and fabulous wall décor featuring the finest in stained glass and quality finishing from Meyda Lighting.

Choose from all new Meyda Tiffany designs or build your own craftsman style fixtures and customize decorative stained glass lamps; Meyda Lighting offers the finest in stained glass light fixtures, wall art and home décor.

For over 36 years, Meyda Tiffany has delivered top quality stained glass with a magnificent assortment of table and floor lamps, ceiling pendants, wall sconces and decorative accessories.

Named for its founders “Meyer” and “Ida,” Meyda Tiffany took root when Meyer Cohen built a stained glass window for his wife Ida.  What began as a hobby turned into America’s leading and oldest manufacturer of custom and decorative lighting.

Still a family-run business, Meyda remains committed to providing top quality Tiffany-style products, representing a wide range of fashions from traditional to eclectic.  Through a series of strong cooperative relationships with several small handicraft workshops overseas, Meyda’s designers work closely with quality stained glass studios to ensure a superb finished product.

Ever-expanding to offer luminous and brilliant lamps and decorative accessories, Meyda recently acquired Quality Bent Glass Company (QBG). The originator of many notable stained glass concepts, including the famous Coca-Cola chandeliers, QBG has been seamlessly incorporated into the Meyda Tiffany family.

Meyda utilizes QBG’s original tools, molds and techniques to create nostalgic lighting products much like those offered at Tiffany Studios in NYC in the early 1900’s.

With the purchase of Mecco Art, a metal art studio, Meyda Tiffany further expanded their range with state-of-the-art equipment and novel manufacturing techniques to produce spectacular custom crafted lighting and décor under the Meyda Custom Lighting brand.

Under Meyda Lighting Brand, thousands of decorative styles are offered throughout fine home lighting and home decor dealers in the United States and Canada.

The works of Louis Comfort Tiffany, Dirk Van Erp, Gustav Stickley and other outstanding masters inspires many of Meyda’s lighting designs.  Artistic compositions include Arts and Crafts light fixtures, as well as Rustic, Gothic, Revival and Contemporary lamps and decor.

Meyda’s extensive line encompasses outdoor lighting, too. Wall sconces, stained glass windows, fireplace screens, billiard/kitchen island fixtures, and novelty items are also featured in their repertoire of stylized lighting and home décor.

The creative energy at Meyda is astounding, as new styles and magnificent colors in hand-painted glass continue to enchant and illuminate with the utmost in elegance and sophistication. Meyda continues to implement one of the industry’s most extensive product development programs.

Whether you are searching for a bit of nature in sunflowers, wisteria and dragonflies or a hand-painted flush fixture reminiscent of Van Gogh’s “Starry Night,” Meyda Tiffany will delight your senses with eye-catching illumination.

Special order or choose from a grand selection of table lamps, floor lamps, ceiling pendants, flush fixtures, and wall lights.  Opt for a Tiffany-style table lamp or custom design your signature stained glass kitchen island light with Meyda Tiffany. Now available at 1800lighting.com, Meyda Tiffany is blooming with new summer colors.

There are many electrical hazards in industrial plants including arc blasts, shock and arc flash. These can result in serious injuries. Accidents involving electricity may sometimes be fatal. Industrial plant environments create potential for these events to occur not only to plant owners, but also to maintenance staff.

Electricians often assume that these hazards do not apply to them. These beliefs often persist until a major incident occurs that results in both financial and personal repercussions, that result in a change in policy within the plant.

Implementing policies that encourage a culture of electrical safety doesn’t have to be reactive. Taking steps to minimize the risks associated with electrical hazards will create a safe working environment for everyone, and not just the maintenance team.

One of the most important aspects of enhancing safety is establishing a routine for the maintenance of electrical equipment in the facility. This is not only vital for optimizing the performance of the equipment, but also ensuring reliability, safety and preventing unnecessary downtime.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs:

Home maintenance can be overwhelming, especially when you don’t know where to start. Roofs that need re-shingling, carpets that have seen better days, that occasional leak you still have yet to place… there’s usually always something that needs fixing. Problems that are visible are usually easy to track and stop before the problem gets worse, but what if there’s an issue inside your walls?Outdated wiring is an issue all homeowners will eventually face. Homes that are at least 30 years old are likely to have outdated wiring not designed to operate with the modern homeowner’s lifestyle. Older homes with 60 amps can’t handle powering multiple appliances at once, not when the typical homeowner needs a house with at least 100 amps. It’s important to note that old wiring isn’t just an issue of inconvenience, but safety.