Do you have working smoke alarms? It could mean the difference between life and death. Smoke alarms are the first line of defense in a house fire. They act as an early warning sign, allowing you enough time to evacuate the premise. While these devices are small and often unnoticed, they could save your life. If you can’t recall the locations of your smoke alarms or when they were last tested, now is the time to act.

Many people think that in order to save money on your electrical bill, you must accept some discomforts or inconveniences. But that is not the case! You don’t need to deal with the unbearable heat in the summer instead of turning on your air conditioner. You don’t need to unplug all of your appliances after every use to save a few dollars.  We have put together a few key recommendations to get you started on your electrical bill savings without having to give up the comfort and conveniences in your home.

Home Energy Audit

The best way to start your savings is to have a local electrician perform a home energy audit. Your electrician will go through your house examining your electrical wiring, distribution, lighting, electric-powered home equipment and systems in order to increase the efficiency of your home and ultimately save you money on your electrical bill. Some auditors may even go as far as to understand your daily habits that may be costing you more money. For instance, did you know that doing a full load of dishes in the dishwasher rather than washing them by hand actually saves you money?

Once you have had your home audited, make sure to check out Live SmartBC for any rebates you may be eligible for. BC residents have the privilege of gaining rebates for increasing the efficiency of their home; don’t let this savings go to waste!

Install Ceiling Fans

Another great way to save money on your electrical bill is to install ceiling fans. Apart from your air conditioner, ceiling fans push air downwards, blowing the cool air directly onto your body rather than cooling the whole room. On top of that, ceiling fans need very little maintenance (other than a little dusting or bulb changes), which can save you a lot of money in the long run. You may be thinking, that’s great but what about in the winter when I’m trying to heat my house? Surprisingly, ceiling fans are a great energy saving tool for the winter months too! Heat rises. So by running your fan on a low speed, you can circulate the warm air that has risen and create a more evenly heated room and shortening the time it takes your heater to work. This saves you money both in the summer and the winter.

Replace Air Filters

Lastly, you can save money on small changes like replacing your air filters regularly. A lot of times, this is a task many of us forget about but it can make a significant difference in your potential savings. When dirt builds up on your filter it prevents the airflow from working as efficiently. Your air system now needs to work harder in order to maintain the same level of airflow and because of that, increasing your electrical bill. By regularly maintaining your air filters (once a month), you will not only save money, but your family will be breathing in the cleanest air.

These are just a few ways to save on your electrical bills. Our highly qualified team of professionals at Expert Electric is excited to help you get started on your potential savings. Call today for further assistance or a free quote on some of our money-saving services.  604-681-8338

There are plenty of reasons to install new indoor light fixtures in your home. Perhaps you want to update your interior aesthetic, or save energy by upgrading to efficient LED bulbs. Maybe you even want to bring your lighting into a smart home control system. Although wiring a new fixture is usually a simple job, complications can crop up if your home still uses an outdated wiring system. In order to comply with your local building code, you may have to perform some extra electrical work to ensure the safety of your new fixture. Read on to learn more.

Bringing Older Electrical Work Up to Code

If your home still uses knob-and-tube wiring, the law prohibits connecting new light fixtures to the old wiring. You don't have to replace the entire wiring system itself, although that’s not a bad idea, because it can reduce your risk of an electrical fire and lower your insurance rates. Even if you don't have the time or money for such extensive electrical work, though, you can remain in compliance with your local code by installing an electrical box between your wiring and the light fixture.

You can purchase an appropriate electrical box at most local hardware stores – but make sure you verify that it is designed to meet local code guidelines for installing new light fixtures. From there, after you turn off the power to the room, you have to cut a hole in the wall where you want the fixture to go, large enough for the box to fit. If you're lucky, the fixture will be near a stud or part of the frame so you can mount the box easily. Otherwise, you have to cut the wall extremely carefully to ensure you leave enough lath and plaster keys to support the box.

Wiring the New Light into Place

Next, once the box is ready to be installed, follow the manufacturer instructions to clamp in the home wiring to the back of the unit. You may have to add a ground wire as well, depending on the specific scenario. Anchor the box using metal supports, and when it's all in place, connect the light fixture. When everything is securely connected, you can turn the power back on and give your new light a trial run.

Remember, knob-and-tube wiring can be a fire hazard, and performing electrical work in general can be dangerous if you don't know what you're doing. If you have any doubts or questions about installing your new light fixture, the best route is to have a professional electrician give you a hand.

Expert Assistance with Your Electrical Work

For assistance with all your electrical work, including installing new light fixtures, contact a qualified residential electrician today.