In case there is a flash flood or storm in your area or if there is a severe plumbing leak or pipe burst, that can result in flooding of water in different areas of your home. Water can cause a lot of damage to the installations and features on your property, and you would have to start the clean-up and repairs without delay. This is also when you start evaluating what can be salvaged and what would have to be replaced – and this includes your home’s wiring.

The wiring inside the walls can become dysfunctional and dangerous if it’s exposed to or submerged in water. If there is a severe flood, it becomes important to completely replace the wiring in your home. Not too many builders actually use wiring that’s rated for water exposure of this kind. Of course, not much can be done till the time all the flood water recedes and all the water has been cleared out from your home.

Even when all the water is pumped out from the indoor spaces, it’s best to shut down the electricity supply at the circuit box mains before continuing with anything. Call in your local electrician to test the wiring in your home. Even if it is still in a working condition, it’s never a good idea to use it.

The insulation can get degraded and that can raise the chances of an electrical fire in the future. In addition, when there are traces of moisture in the wiring, that leads to mould & mildew growth and the metal parts in the system can corrode. This is especially the case when the property has become flooded with salty water.

When it comes to rewiring jobs, you also have to factor in the cost of opening up the wall panels and fixing them. In instances of a flood, the walls are generally torn down right up to the framework. If you take this opportunity to upgrade the wiring in your home, you can save a significant amount of money.

Floodwater is never clean and that proves to be an additional hazard to the wiring and other installations in your home. Chemicals, oil, sewage and a number of other contaminants that come with the floodwater work their way into the smallest spaces, and this is why it’s best to just start afresh with the installation. In comparison, if your home’s wiring has been impacted by water from a burst pipe, you might be able to save these features; this is because it may not be fully-submerged in water.

However, it’s never a good idea to test the condition of the wiring yourself and you should call in a skilled and licensed electrician to thoroughly check and evaluate the installation and give their opinion. Regardless of whether the wiring in your home has got impacted by flood water or water from a damaged plumbing installation, it’s important to get it checked without delay. The professionals will provide suitable solutions based on the condition and location of the wiring.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to handle this job in an expert manner. We can install and maintain all type of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

If there’s one thing kids seem to love, it’s playing with everything around the house other than their toys—the more dangerous the better! Electrical outlets in particular are an endless source of fascination for young children, and according to the Electrical Safety Foundation International, hospitals across the country treat nearly seven children for electric shock and burn injuries related to tampering with wall outlets each day. But buying childproofing devices for your electrical outlets can be a challenge, and if you don’t choose carefully they may not fit in your outlets or may be too easy for your child to pull out. So how do you choose?

There are two types of outlets commonly seen in homes—standard and decorator outlets. You can tell them apart by looking at the number of screws they have:

Different types of outlets have different requirements for childproofing materials, so figuring out which type you have is very important. Note that standard outlets will be able to use most childproofing methods—decorator outlets are a little more complicated, but the packages on the items you buy should list whether they are compatible. Remember that most items approved for decorator outlets will not work in standard outlets, and vice-versa, so choose carefully!

Outlet covers, which usually plug right into the outlet, are a good choice for outlets that have “fixed” items that are plugged in all the time, such as lamps or televisions, as well as areas that use large adapters like at the computer. Outlet covers are effective at keeping both infants and toddlers out of the outlets, which means they’ll last for a number of years. Outlet covers for both standard and decorator outlets can be purchased.

Unlike outlet covers, safety outlet plates replace your existing outlet plates and have a small sliding door that covers the receptacle when not in use. These work best for outlets that you have to repeatedly plug things into and unplug things from, such as a vacuum cleaner. They are also difficult for children to figure out and should be effective for many years.

Ideal for outlets that are kept out of site and rarely used, outlet plugs are usually easier for kids to figure out but are still good at preventing access to the inside of the outlet. The good news is that they can be used interchangeably in standard and decorator outlets.

Keeping your children safe is your number one priority, and childproofing your electrical outlets is a great way to do that. Damaged or malfunctioning outlets can also be a major safety hazard in your home, so if you need outlet repair in Maryland, Virginia, or Washington, DC, call Kolb Electric today!

There are a wide array of hidden problems that homeowners may discover in their first few weeks occupying a property. This is especially true in older houses, where the new buyer is hardly the first occupant. Many such older homes in Virginia, Maryland and Washington, D.C., are generally solid structures but have minor electrical or plumbing issues that aren't apparent when visiting an open house.

One of the more costly problems that you'll want to watch out for is "hot wiring" throughout the property. This is when, somewhere in your house, the electricity is causing a dangerous amount of heat. Whenever there is too much heat coming from one particular spot in the home, there is the potential for fire, which could end up costing you significantly in the long run - or worse, fatally harm members of the household.

The wall switch is one area where you should be especially worried about poor wiring. These switches are designed so that heat won't build up if correctly installed, so any rise in temperature is a sure sign something is amiss. It is relatively common for a dimming switch to build up heat over an extended period - they are, after all, powering at least 600 watts' worth of light bulbs. However, heat at a receptacle is another matter; a connection there needs immediate improvement to prevent a fire.