If you are living in an older house, you may notice some outlets do not work all the time. You may experience the problem of when you plug things in; the plug is loose and falls out easily. Another common occurrence is a black mark on one side of the outlet. All of these problems are indicators you need a Beverly Hill electrician to come out and take a look.

There are several reasons why an outlet may not be working properly. Typically, it can be attributed to loose wires disturbing the connection. It could also be due to rodents using the wires as chew toys. In any case, loose wires and a faulty electrical outlet are a serious safety hazard. Those wires are a fire waiting to happen. In most cases, all that is needed to remedy the problem is a replacement of the outlet. This is a job you can do on your own if you have knowledge about working with electricity. You will need to make sure you cut the power to that outlet before even attempting any work.

If you are not sure how to check for loose wires, you are not alone. This is a job an electrician in Beverly Hills can certainly help you with. There is no need for you to mess around with electric wiring if you are uncomfortable and unfamiliar with the basics. The electrician will check the outlet for power with a volt meter. From there, the electrician will pull outlet away from the wall and check the wiring. In some cases, especially with older homes, it is a good idea to have an electrical inspection completed to check for other wiring issues that could potentially be dangerous fire hazards.

If the electrician determines it is simply a case of loose wiring, it is an easy fix and you get peace of mind. Call The Electric Connection in Beverly Hills to arrange an appointment.

We all know that lowering the thermostat a degree or two in the winter will also lower our energy bills, and that turning off the lights when you leave a room conserves energy. There's a lot more you can do to protect your wallet from high utility bills. The U.S. Department of Energy shares eight ways to help you get more bang for your energy buck.

Cutting your electrical bill by a few dollars here and there gives you a sense of satisfaction that you are making a difference in your monthly budget as well as doing a little something good for the environment. There are some things in our homes that are major energy users, Your furnace, air conditioner, water heater and refrigerator are all things that you need, but are costing you money. You have probably seen plenty of information about how to make your furnace, AC and water heater a little more energy efficient, but do you know how to make your fridge a little easier on the budget? An electrician in Beverly Hills has a few quick tips to help you save money on your electric bill by making your refrigerator less of an energy hog. You can can always count on the team at The Electric Connection to answer any questions you may have about saving electricity.

*Your refrigerator should not be near heat sources. Put your microwave, coffee pot and toaster oven on a counter away from the fridge. If your fridge is currently next to your stove, consider doing a minor remodel to move it.

*It may seem like a no-brainer, but do what you can to limit the amount of times and length of time you open the fridge. Tell the kids to pick what they want and shut the door!

*Do regular maintenance on the coils behind your refrigerator. Use air or a broom to dust off the grime from the coil behind your refrigerator. The build up can effect the efficiency. If you are not sure what you are doing, give an electrician familiar with Beverly Hills electrical work a call.

*A full refrigerator will be more energy efficient. Do what you can to keep your fridge full and you will save money. .

These quick tricks can help you save electricity while prolonging the life of your refrigerator. Give The Electric Connection a call if you have any more questions.

Alexai Erchak, while a graduate student at the Massachusetts Institute of Technology, is credited with developing the first prototype high efficient LED in 2001.  These LEDs use specialized mirrors and tiny photonic crystals to generate more usable light from the semiconductor materials.  Erchak observed that the Swallowtail butterfly highlights their fluorescent blue and green colors with a natural illumination much like that of his specialized prototype, and he was astounded at the similarity between the natural brightening structures in the butterfly’s wings and his own LEDs.

So much we learn from nature! The appeal of new designer outdoor lighting captures the essence of natural beauty and wonders of the world.  Make way for the butterflies and new designer outdoor lighting.

The “butterfly effect” is a phenomenon or belief that the flapping of a butterfly’s wings in one sector of the universe may be related to a tornado occurring in another part of the world. Could it be possible that the gentle vibrations in the wings of a butterfly could be the pivotal mechanism that leads to the ultimate surge of a storm cloud?  Is it science fiction or is there some truth to it?

Either way, there is no denying that the effect of designer outdoor lighting significantly increases the beauty and property value of our home.  And, the latest designs are eco-friendly, sustainable and made to last.

Bask in the splendor of summer style with these super natural compositions.

Novel summer finishes include this Raw Copper with iridescent glass from Arroyo Crafsman.  Arroyo Craftsman designs and manufactures fine outdoor lighting that honors the traditions of elegant simplicity combined with a quality craftsmanship established by the founders of the American Arts and Crafts movement. Arroyo’s designer outdoor lights are inspired by famed styles such as the California Mission, Swiss Chalet and English Tudor. Each piece from Arroyo Craftsman is meticulously hand crafted in the United States and available with several hand applied finish and glass options.

Glowing Butterflies Shine With Natural LEDs