Rats and mice are quite common house pests; once they find your home to be a safe place to live in and that there are different sources of food there, they will be reluctant to leave. Not only do they pose a health hazard, they also tend to cause a lot of damage to various features on your property and will chew through the insulation of your electrical wiring.

This can affect the system and impact the supply of electricity throughout your property and can be a fire hazard as well. Here are some effective tips to prevent rodent damage to the electrical wiring in your home:

Since rodents are nocturnal creatures, you won’t really see them running around your home in the daytime. However, if you are wary, you will surely hear scratching and chewing sounds in the walls of your homes. You may also hear scurrying noises coming from the attic. You should look out for nesting material or droppings and will typically find these in enclosed spaces.

It’s important to check the wiring’s insulation with regularity to ensure that it’s intact and that it hasn’t been chewed by rodents. The unfortunate part is that this isn’t something you can do for wiring behind walls. However, if you are undertaking any repairs, renovation or upgrades, take that as an opportunity to check the wiring for signs of rodent damage.

If you notice any flickering or experience power fluctuation in a certain room or part of the house, or if you find that a certain circuit breaker keeps tripping for no specific reason, get the system checked for rodent damage.

If you notice any signs of a rodent infestation, it’s important that you act without delay and take some steps to get rid of them. Buy some spring traps and rat poison from your local hardware store and set these at different places where you have seen rat droppings or heard noises. Even as you do this, it’s equally important that you also identify where these pests are entering your property from. Place the bait or poison at these points along your home’s exterior walls.

If you find the infestation to be too severe or if you aren’t too confident about using DIY rodent control measures, call a licensed electrician to inspect the wiring and check it thoroughly for damage. If they confirm that the damage has been caused by rats, it’s a good idea to call pest control professionals to handle the rodent control for you. They will provide solutions and give you advice on the steps you can take to prevent these pests from entering your property.

While the rodent control professionals will ensure that the rats are eliminated from your property, they will also advise you on how to seal all the possible rodent entry points in your home. Aside from very evident points such as doors and open windows, these pests can easily squeeze their way into the indoor spaces of your property through holes and large cracks. If the cracks are too small, they won’t shy from chewing their way in through the loose concrete of the walls.

By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.

A whole-house generator offers you the chance to go about your daily routine in relative normality, even when the power from the electric grid is cut out. Unlike portable generators, into which you must plug chosen appliances directly, a whole-house generator is actually hardwired directly into your home’s electrical system. When the power goes out, you can either start up this generator or, if equipped with an automatic transfer switch, wait for it to start itself up within moments. Once it does, you’ll be able to run your appliances and HVAC systems, as well as your gadgets and electronics, with the same ease and convenience as if the power were on. The capabilities of your whole-house generator, and its capacity to support systems of various electrical needs, will depend upon its size and quality of installation. We’ll make sure that you have what you need to keep your home up and running.

A portable generator may run on gasoline, but this is not the right fuel for a whole-house generator. These larger generators may take diesel fuel or run on propane, both of which will have to be stored on site, or you can opt for a whole-house generator fueled by natural gas, which is piped directly to the system. Contact a member of our staff to discuss your options so that you can choose your generator with well-deserved confidence.

Snow and ice are major concerns for homeowners throughout much of North America, and that usually means pulling out the snow shovel a few times each winter. Shoveling snow can be strenuous and uncomfortable work, but it's the only way to get those sidewalks and driveways clear -- or is it?

If you're familiar with radiant floor heating -- an HVAC solution that uses heated coils to warm a home from the floor up -- that same technology has applications outside the home, as well. Specifically, it's a great way to melt ice and snow off of walking and driving surfaces without having to grab a shovel or even venture outside.

Hard on the Pocketbook

Of course, there's a pretty big catch: the price. The equipment and installation can add a significant amount to any home building or remodeling project, especially if the surfaces you want to heat are far from the nearest power source. And that's just for the heating elements -- there's still the matter of removing the old surfaces and pouring new ones. All together, it can cost well into the tens of thousands of dollars to install radiant heating under the driveway and walkways of an average home.

For this reason, radiant heating is usually only a feature in new construction -- with a plan to install the equipment right from the outset, it's possible to shave thousands of dollars off the installation cost.

There's also the cost to operate the equipment, which can run several hundred dollars per winter for homes in especially snowy, icy climates. But for homeowners who dread shoveling every year, that could be a small price to pay.

Going Another Route

If you're not ready to drop thousands of dollars just to cut shoveling out of your life, there are several less pricey ways to keep surfaces clear and safe.

Heat mats. If you like the concept of using radiant heating outdoors but don't like the price tag, you might find a suitable compromise in heat mats. Available in a wide range of sizes, all-weather mats can be placed on your walkways and powered through extension cords to melt snow and ice as it falls. You'll still need to put them out before the winter weather arrives and stow them away after the storm, but it will at least spare you some shoveling.

Rock salt. It's cheap, it's easy to use and it's available at most hardware stores. It's also incredibly effective for melting ice. But it's not without its downsides -- rock salt can be corrosive to metal and even concrete, so you might expect some damage to your vehicles and surfaces over the course of many winters. It can also harm vegetation, pets and indoor surfaces like carpet if it's tracked inside. So if you use salt, use it with care.

Shovel early and often. You'll spend more time outdoors, but if you start shoveling in the middle of a storm, you may be able to prevent ice accumulation. You'll also make it a little easier on your back by shoveling lighter shovelfuls. It's not the ideal solution, but it beats slipping on a slick surface.

Thinking of installing a radiant heated driveway or walkway? Reach out to your local electrician to take the first steps, or just ask for more smart ways you can stay comfortable and safe throughout winter storm season.